This paper is a review of published studies involving the use of ground penetrating radar (GPR) on wood structures. It also contains background information to help the reader understand how GPR functions. The use of GPR on wood structures began to grow in popularity at the turn of the millennium. GPR has many characteristics that make it attractive as an inspection tool for wood: it is faster than many acoustic and stress wave techniques; it does not require the use of a couplant; while it can also detect the presence of moisture. Moisture detection is of prime concern, and several researchers have labored to measure internal moisture using GPR. While there have been several laboratory studies involving the use of GPR on wood, its use as an inspection tool on large wood structures has been limited. This review identified knowledge gaps that need to be addressed to improve the efficacy of GPR as a reliable inspection tool of wood structure. Chief among these gaps, is the ability to distinguish the type of internal feature from the GPR output and the ability to identify internal decay.
An object detection method of ground-penetrating radar (GPR) signals using empirical mode decomposition (EMD) and dynamic time warping (DTW) is proposed in this study. Two groups of timber specimens were examined. The first group comprised of Douglas fir (Pseudotsuga menziesii) timber sections prepared in the laboratory with inserts of known internal characteristics. The second group comprised of timber girders salvaged from the timber bridges on historic Route 66 over 80 years. A GSSI Subsurface Interface Radar (SIR) System 4000 with a 2 GHz palm antenna was used to scan these two groups of specimens. GPR sensed differences in dielectric constants (DC) along the scan path caused by the presence of water, metal, or air within the wood. This study focuses on the feature identification and defect classification. The results show that the processing methods were efficient for the illustration of GPR information.
Environmental concerns about preservative bleeding (or migrating) from timber bridges have increased in recent years. This preliminary study examined the creosote retention levels at six timber highway bridges in Michigan's lower peninsula during the summer of 2000. Several test core samples were removed from the bridge superstructures (four bleeders and two controls) and were evaluated for creosote content in the laboratory. Results from three of the four bleeder bridges indicated high creosote retention levels between 36 and 52 lb/ft 3 (576.7 and 833 kg/m 3) after several years in service.