In this paper, three-dimensional static and free vibration analysis of functionally graded graphene platelets-reinforced composite (FG-GPLRC) truncated conical shells, cylindrical shells and annular plates with various boundary conditions is carried out within the framework of elasticity theory. The main contribution of the present work is that formulation for free vibration and bending behavior of the FG-GPLRC truncated conical shell based on theory of elasticity has not yet been reported. Additionally, formulation and solution for cylindrical shell and annular plate are derived by changing the semi vertex angle in formulation and solution of FG-GPLRC truncated conical shell. A semi-analytical solution is proposed base on employing differential quadrature method (DQM) together with state-space technique. Validity of current approach is assessed by comparing its numerical results with those available in the literature. An especial attention is drawn to the role of GPLs weight fraction, patterns of GPLs distribution through the thickness direction, geometrical parameters such as semi-vertex angle, length to mid-radius ratio on natural frequencies and bending characteristics. Numerical results reveal that desirable static and free vibration response (such as lower radial deflection and higher natural frequencies) can be achieved by locating more square shaped GPLs near inner and outer surfaces.
30 January 2020 in Journal of Vibration and Control
Because of promoted thermomechanical performance of functionally graded graphene platelet–reinforced composite ultralight porous structural components, this article investigates bending and free vibration behavior of functionally graded graphene platelet–reinforced composite porous cylindrical shell based on the theory of elasticity. Effective elasticity modulus of the composite is estimated with the aid of modified version of Halpin–Tsai micromechanics. Rule of mixtures is used to obtain mass density and Poisson’s ratio of the graphene platelet–reinforced composite shell. An analytical solution is introduced to obtain the natural frequencies and static behavior of simply supported cylindrical shell by applying the state-space technique along the radial coordinate and Fourier series expansion along the circumferential and axial direction. In addition, differential quadrature method is used to explore the response of the cylindrical shell in the other cases of boundary conditions. Validity of the applied approach is examined by comparing the numerical results with those published in the available literature. A comprehensive parametric study is conducted on the effects of different combinations of graphene platelets distribution patterns and porosity distribution patterns, boundary conditions, graphene platelets weight fraction, porosity coefficient, and geometry of the shell (such as mid-radius to thickness ratio and length to mid-radius ratio) on the bending and free vibration behavior of the functionally graded graphene platelet–reinforced composite porous cylindrical shell. The results of this study provide useful practical tips for engineers designing composite structures.
27 December 2019 in Mechanics Based Design of Structures and Machines
Due to important role of composite materials in broad spectrum of applications, this article focused on bending and frequency characteristics of a functionally graded graphene platelet (GPL) reinforced composite (FG-GPLRC) porous circular/annular plates with various boundary conditions by employing state-space differential quadrature method (DQM). The material properties of piece-wise graphene-reinforced composites are assumed to be graded in the thickness direction of a circular/annular plates and are estimated through the modified Halpin-Tsai micromechanics model. Equations of motion are established within the framework of theory of elasticity and are formulated along the thickness direction in the form of state-space. Applying DQM along the radial direction provides a semi-analytical solution to bending and free vibration of the plate. The results of applying present approach are validated by comparing them with those reported in the literature. A thorough parametric investigation is conducted on the effects of different GPLs distributions integrated with various distribution patterns of internal porosity, thickness to radius ratio, outer to inner radius ratio, GPLs weight fraction, porosity coefficient and edge boundary conditions on the bending and frequency behavior of FG-GPLRC circular/annular plates. The results reveal a very useful practical designing hint that locating more GPLs in the vicinity of the upper and bottom surfaces of the circular/annular plates with lower outer radius to thickness ratio leads to the highest natural frequencies beside the lowest deflections in comparison with other configurations. This study could be beneficial for engineers designing and analyzing composite structures as the mainstay of high-performance devices.
20 September 2019 in Mechanics Based Design of Structures and Machines
Due to superior characteristics added to composite structures by using graphene-platelets (GPLs) as nanofillers, this article investigates torsional buckling analysis of functionally graded graphene-platelets reinforced composite (FG-GPLRC) porous cylindrical shell within the framework of the first-order shear deformation theory (FSDT). The relationship between coefficients of porosity and mass density is determined based on the typical mechanical property of an open-cell metal foam. The modified Halpin-Tsai micromechanics model is employed to estimate the effective modulus of elasticity and the rule of mixtures to compute density and Poisson’s ratio of the shell material. First-order shear deformation theory and Rayleigh-Ritz method are employed to establish the related eigenvalue equations in order to calculate the critical buckling torque. The accuracy of the applied approach is examined by comparing the numerical results with those published in the available literature and also with the simulation results of ABAQUS. Additionally, the effects of various matrix materials, internal porosities and GPLs distribution patterns, size and concentration of porosities, GPLs weight fraction, graphene plates dimensional ratios, geometric factors such as mid-radius to thickness ratio and length to mid-radius on the torsional performance of FG-GPLRC porous cylindrical shell are inspected. The results of this article can be regarded as practical designing hints for engineers analyzing the mechanical behavior of innovative composite structures.
In this article, we study the vibration performance of multiscale hybrid nanocomposite (MHC) annular plates (MHCAP) resting on Winkler–Pasternak substrates exposed to nonlinear temperature gradients. The matrix material is reinforced with carbon nanotubes (CNTs) or carbon fibers (CF) at the nano- or macroscale, respectively. The annular plate is modeled based on higher-order shear deformation theory (HSDT). We present a modified Halpin–Tsai model to predict the effective properties of the MHCAP. Hamilton’s principle was employed to establish the governing equations of motion, which is finally solved by the generalized differential quadrature method (GDQM). In order to validate the approach, numerical results were compared with available results from the literature. Subsequently, a comprehensive parameter study was carried out to quantify the influence of different parameters such as stiffness of the substrate, patterns of temperature increase, outer temperature, volume fraction and orientation angle of the CFs, weight fraction and distribution patterns of CNTs, outer radius to inner radius ratio, and inner radius to thickness ratio on the response of the plate. The results show that applying a sinusoidal temperature rise and locating more CNTs in the vicinity of the bottom surface yielded the highest natural frequency.