In this paper, a quadrotor dynamic model’s energy efficiency was investigated. A method for the design of the dynamic model which assures energy consumption estimation was presented. This model was developed to analyze the energy efficiency of the quadrotor during each maneuver. A medium-class quadrotor (4.689 kg) was used as a test platform. Thrust force correction factors obtained with FLIGHTLAB software were used to predict object behavior in forward flight. Model validation and long-duration flight tests in outdoor windy conditions are also presented. Monte-Carlo simulation was used to study the influence of uncertainties in model parameters on the simulation reliability. The developed model might be used for practical purposes (for example, energy-efficient coverage path planning).
The development of projectile guidance requires consideration of a large number of possible flight scenarios with various system parameters. In this paper, the Monte-Carlo parametric study for a 160 mm artillery rocket equipped with a set of 34 small, solid propellant lateral thrusters located before the center of mass was evaluated to reduce projectile dispersion and collateral damage. The novelty of this paper lies in the functionality of modifying the shape of the trajectory in the terminal phase using lateral thrusters only. A six degree of freedom mathematical model implemented in MATLAB/Simulink was used to investigate the influence of numerous parameters on the resulting accuracy at several launch elevation angles. Augmented impact point prediction guidance was applied in the descending portion of the flight trajectory to achieve the trajectory shaping functionality. The optimum combination of thruster magnitude and algorithm parameters was obtained. The real data from the LN200 inertial measurement unit were used to investigate the influence of noise on the resulting accuracy. It was shown that with the proposed guidance method, the dispersion could be reduced by more than 250 times and the projectile impact angle might be increased when compared to an unguided projectile.
20 October 2018 in Journal of Theoretical and Applied Mechanics
In this paper the missile flight dynamics during the launch phase is studied. The main concept behind this work was to use a vertical cold launch system and the rapid pitch maneuver to achieve longer missile range and better firing coverage. A set of a small pulse rocket engines was used to obtain the desired missile attitude. The physical and mathematical models of the missile are described. The pulse jets control algorithm is presented. The computer program of the missile model has been developed in the Simulink environment. The missile behavior in the low-speed flight envelope has been examined. The results of numerical simulations in the form of the graphs are presented. It has been obtained that there exist several benefits of the cold launch method as increased range and higher target kill probability.
In vertical cold launch the missile starts without the function of the main engine. Over the launcher, the attitude of the missile is controlled by a set of lateral thrusters. However, a quick turn might be disturbed by various uncertainties. This study discusses the problem of the influences of disturbances and the repeatability of lateral thrusters’ ignition on the pitch maneuver quality. The generic 152.4 mm projectile equipped in small, solid propellant lateral thrusters was used as a test platform. A six degree of freedom mathematical model was developed to execute the Monte-Carlo simulations of the launch phase and to prepare the flight test campaign. The parametric analysis was performed to investigate the influence of system uncertainties on quick turn repeatability. A series of ground laboratory trials was accomplished. Thirteen flight tests were completed on the missile test range. The flight parameters were measured using an onboard inertial measurement unit and a ground vision system. It was experimentally proved that the cold vertical launch maneuver could be realized properly with at least two lateral motors. It was found that the initial roll rate of the projectile and the lateral thrusters ‘igniters’ uncertainties could affect the pitch angle achieved and must be minimized to reduce the projectile dispersion.
24 March 2020 in Archive of Mechanical Engineering
The modified configuration of the 155 mm rocket assisted projectile equipped with lateral thrusters was proposed. Six degree of freedom mathematical model was used to investigate the quality of the considered projectile. Impact point prediction guidance scheme intended for low control authority projectile was developed to minimize the dispersion radius. Simple point mass model was applied to calculate the impact point coordinates during the flight. Main motor time delay impact on range characteristics was investigated. Miss distance errors and Circular Error Probable for various lateral thruster total impulse were obtained. Monte-Carlo simulations proved that the impact point dispersion could be reduced significantly when the circular array of 15 solid propellant lateral thrusters was used. Single motor operation time was set to be 0.025~s. Finally, the warhead radii of destruction were analyzed.
The article presents the analysis of the impact point dispersion reduction using lateral correction thrusters. Two types of control algorithms are used and four sources of uncertainties are taken into account: aerodynamic parameters, thrust curve, initial conditions and IMU errors. The Monte Carlo approach was used for simulations and Circular Error Probable was used as a measure of dispersion. Generic rocket mathematical and simulation model was created in MATLAB/Simulink 2020b environment. Results show that the use of control algorithms greatly reduces the impact point dispersion.