This work focuses on an experimental and numerical investigation into monitoring damage in a cube-shaped concrete specimen under compression. Experimental monitoring uses acoustic emission (AE) signals acquired by two independent measurement apparatuses, and the same damage process is numerically simulated with the lattice discrete element method (LDEM). The results from the experiment and simulation are then compared in terms of their failure load, final configurations, and the evolution of global parameters based on AE signals, such as the b-value coefficient and the natural time approach. It is concluded that the results from the AE analysis present a significant sensitivity to the characteristics of the acquisition systems. However, natural time methods are more robust for determining such differences, indicating the same general tendency for all three data sets.
This work focuses on analyzing acoustic emission (AE) signals as a means to predict failure in structures. There are two main approaches that are considered: (i) long-range correlation analysis using both the Hurst (H) and the detrended fluctuation analysis (DFA) exponents, and (ii) natural time domain (NT) analysis. These methodologies are applied to the data that were collected from two application examples: a glass fiber-reinforced polymeric plate and a spaghetti bridge model, where both structures were subjected to increasing loads until collapse. A traditional (AE) signal analysis was also performed to reference the study of the other methods. The results indicate that the proposed methods yield reliable indication of failure in the studied structures.
12 February 2015 in Fatigue & Fracture of Engineering Materials & Structures