This paper presents the influence of a thin metal layer deposition on the surface of a tapered optical fiber surrounded by a low liquid crystal, on light propagation inside the taper structure. In this research, three types of liquid crystal cells were under investigation: orthogonal, parallel, and twist. They differed by the rubbing direction of the electrodes in relation to the fiber axis determining the initial molecule arrangement inside the cell. Gold films with thickness d = 30 nm were deposited on the tapered fiber surface in the tapered waist area. Cells including a tapered optical fiber with no metallic layer were also examined and presented as a reference. All measurements were performed at room temperature for a different steering voltage U from 0 to 200 V, with and without any amplitude modulation with a frequency f = 5 Hz, and the wavelength λ range from 550 to 1200 nm. As a result, the resonant peaks were obtained, which depends on a liquid crystal cell type and steering voltage, as well. This paper shows the possibility of sensing the change of applied voltage by the constructed system. During measurements, additional effects as signal overlapping and intermodal interference were observed reducing measured voltage value. In the future, the improved, similar systems that will have a better response could be used as a sensor of factors to which liquid crystal (LC) will be sensitive, especially temperature and electric field.

This paper presents a study of the influence of bimetallic layer covers of a tapered optical fiber surrounded by a low refractive index liquid crystal on the properties of light propagation in the taper structure. This research follows previous works on the effect of monometallic thin films (Au and Ag). In this case, the total thicknesses of the bimetallic layers were h = 10 nm, and the participation of gold and silver was equal. The films were deposited on one side of the tapered waist area. The liquid crystal cells were controlled with a voltage U from 0 to 200 V, with and without amplitude modulation at a frequency of f_mod = 5 Hz. For the purposes of this research, spectral characteristics were obtained for a wavelength λ ranging from 550 to 1200 nm. Measurements were carried out at room temperature for three types of rubbed layers orientation—orthogonal, parallel, and twist in relation to the fiber axis. Obtained resonant peaks were compared with the previous results regarding the resonant wavelength, peak width, SNR, and maximum absorption. In the presented paper, the novelty is mainly focused on the materials used and their time stability, as well as corresponding changes in the technological parameters used.

The paper presents the results of design, manufacturing, and characterization of a hybrid broad band in-line fiber-optic device. It uses nematic liquid crystal as cladding with electro-steering properties in a biconical optical fiber taper structure. Liquid crystal mixtures denoted as 6CHBT and E7 are designed for electric as well as temperature control of electromagnetic wave propagation in a broad wavelength range. The applied taper with 10±0.5 μm diameters has losses lower than 0.5 dB in whole investigated spectrum range. Three kinds of initial liquid crystal molecules’ orientations (parallel, orthogonal, and twist) in relation to the light beam propagating in a taper were applied. The performance of a tuned cladding was studied at an electric field of the range of 0–190 V and the temperature range from 20°C up to 42°C and 59°C for 6CHBT and E7, respectively. The induced reorientation of liquid crystal molecules was measured at a broad wavelength range (550-1550 nm).

Currently, optical fibers play a leading role in telecommunications, serve as special transmission components for industrial applications, and form the basis of highly sensitive sensor elements. One of the most commonly used modifications is the reduction in the initial dimensions of the cladding and core to a few or several micrometers, allowing the evanescent wave emerging from the tapered region to interact with the surrounding environment. As a result, the microfiber formed in this way is highly sensitive to any changes in its surroundings, making it an ideal sensing element. This article primarily focuses on reviewing the latest trends in science involving various types of optical microfibers, including tapers, rings, loops, coils, and tapered fiber Bragg gratings. Additionally, it discusses the most commonly used materials for coating fiber optic elements—such as metals, oxides, polymers, organic materials, and graphene—which enhance sensitivity to specific physical factors and enable selectivity in the developed sensors.

This paper is a continuation of previous work and shows the enhancement of the surface plasmon resonance effect in a tapered optical fiber device. The study investigated liquid crystal cells containing a tapered optical fiber covered with a silver nanolayer, surrounded by a low refractive index liquid crystal in terms of the properties of light propagation in the taper structure. Silver films with a thickness of d = 10 nm were deposited on the tapered waist area. Measurements were performed at room temperature; liquid crystal steering voltage U from 0 to 200 V, with and without any amplitude modulation with a frequency of f = 5 Hz, and the wavelength λ ranged from 550 to 1200 nm. A significant influence of the initial arrangement of liquid crystals molecules on light propagation was observed. Three types of liquid crystal cells—orthogonal, parallel, and twist—were considered. During the measurements, resonant peaks were obtained—the position of which can also be controlled by the type of liquid crystal cells and the steering voltage. Based on the obtained results, the best parameters, such as highest peak’s width reduction, and the highest SNR value were received for twisted cells. In addition, the present work was compared with the previous work and showed the possibility of improving properties of the manufactured probes, and consequently, the surface plasmon resonance effect. In the presented paper, the novelty is mainly focused on the used materials as well as suitable changes in applied technological parameters. In contrast to gold, silver is characterized by different optic and dielectric properties, e.g., refractive index, extension coefficient, and permittivity, which results in changes in the light propagation and the SPR wavelengths.

This paper presents results obtained for biconical tapered fibers surrounded/immersed in liquid crystal mixtures. The phenomenon of light propagating in the whole structure of a tapered fiber allows the creation of a sensor where the tapered region represents a core whereas the surrounding medium becomes a cladding. Created devices are very sensitive to changing refractive index value in a surrounding medium caused by modifying external environmental parameters like temperature, electric or magnetic field. For this reason, the properties of materials used as cladding should be easily modified. In this investigation, cells have been filled with two different nematic liquid crystals given as 1550* and 6CHBT (4-(trans-4-n-hexylcyclohexyl) isothiocyanatobenzoate), as well as with the same mixtures doped with 0.1 wt% gold nanoparticles (AuNPs). Optical spectrum analysis for the wavelength range of 550–1150 nm and time-courses performed for a wavelength of 846 nm at the temperature range of T = 25–40 °C were provided. For all investigations, a steering voltage in the range of 0–200 V which allows establishing the dopes’ influence on transmitted power and time response at different temperatures was applied.