High-stability, high-efficiency, and low-cost solar photoelectrochemical (PEC) water splitting has great potential for hydrogen-energy applications. Here, we report on gold/titanium dioxide (Au/TiO₂) nanofiber structures grown directly on a conductive indium tin oxide substrate, and used as photoelectrodes in PEC cells for hydrogen generation. The titanium dioxide nanofibers (TiO₂ NFs) are synthesized using electrospinning, and are surface-modified by the deposition of gold nanoparticles (Au NPs) using a simple photoreduction method. The structure and morphology of the materials were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The surface plasmon resonance (SPR) of the Au NPs was investigated by ultraviolet-visible (UV-Vis) diffuse reflectance spectroscopy. The PEC properties of the as-prepared photoelectrodes were measured. The obtained photoconversion efficiency of 0.52% under simulated-sunlight illumination by a 150 W xenon lamp of the Au/TiO₂ NFs structure with 15 min UV irradiation for Au NP deposition was the highest value from comparable structures. Working photoelectrode stability was tested, and the mechanism of the enhanced PEC performance is discussed.

Omnidirectional Au nanoparticle-embedded ZnO/CdS core/shell heterostructures were fabricated on ITO substrates for photoelectrochemical water-splitting photoelectrodes by combining electrospinning, hydrothermal treatment, photoreduction and chemical bath deposition. The obtained omnidirectional heterostructures harvested solar light efficiently, provided good electrical conductivity, and enhanced the charge transfer between CdS and ZnO that eventually enhanced photoconversion efficiency.

Nanostructures of titanium nitride (TiN) have recently been considered as a new class of plasmonic materials that have been utilized in many solar energy applications. This work presents the synthesis of a novel nanostructure of TiN that has a nanodonut shape from natural ilmenite ore using a low-cost and bulk method. The TiN nanodonuts exhibit strong and spectrally broad localized surface plasmon resonance absorption in the visible region centered at 560 nm, which is well suited for thermoplasmonic applications as a nanoscale heat source. The heat generation is investigated by water evaporation experiments under simulated solar light, demonstrating excellent solar light harvesting performance of the nanodonut structure.

Nanoscale tuning of the surface properties of graphene-like materials is essential to optimize their application in electronic devices and protective technologies. The covalent modification method has recently been established as the most effective approach for tailoring the interface structure and properties, which are key aspects for fine-tuning the processability and performance of graphene-like materials. In this work, we demonstrate systematic exploration of the reversible covalent functionalization of a highly oriented pyrolytic graphite (HOPG) surface, a model system of multi-layered graphene, at the molecular scale. This is achieved using 3,5-trifluoromethyl benzenediazonum (3,5-TFD) and experimental investigations via cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning tunneling microscopy (STM), and Raman spectroscopy. The degree of functionalization could be tuned by varying the concentration of 3,5-TFD dissolved in the grafting electrolyte. The covalently functionalized layer of 3,5-TFD was either locally degrafted by the STM tip or globally detracted upon thermal treatment, leaving the defect-free graphitic surfaces behind. Our findings open a new pathway for reversibly and robustly functionalizing graphene and other 2D materials for multiple uses in high-end applications.

3D-ordered porous CdS/AgI/ZnO nanostructures were designed to perform as high-performance photoelectrodes for photoelectrochemical (PEC) water-splitting applications. They rely on the advantages of an extremely large active surface area, high absorption capacity in the visible-light region, fast carrier separation and transportation caused by the intrinsic ladder-like band arrangement. These nanostructures were fabricated by employing a three-stage experiment in a sequence of hard mold-assisted electrochemical deposition, wet chemical method and deposition–precipitation. First, 3D-ordered ZnO nanostructures were electrochemically deposited using a polystyrene film as the sacrificed template. AgI nanoparticles were then decorated on the interfacial ZnO nanostructures by deposition–precipitation. Finally, these binary AgI/ZnO nanoporous networks were thoroughly wet-chemically coated with a CdS film to form a so-called ‘ternary interfacial CdS/AgI/ZnO nanostructures’. The PEC water-splitting properties of the fabricated 3D nanostructures were systematically studied and compared. As a result, the highest efficiency of the fabricated 3D-ordered porous CdS/AgI/ZnO measured under the irradiation of solar simulation is about 5.2%, which is relatively 1.5, 3.5 and 11.3 times greater than that of the corresponding CdS/ZnO (3,4%), AgI/ZnO (1.5%) and pristine porous ZnO (0.46%) photoelectrodes, respectively. The significant improvement in the PEC activity is attributed to the enhanced charge separation and transport of ternary photoelectrodes caused by an unconventional ladder-like band arrangement formed between interfacial CdS-AgI-ZnO. Our study provides a promising strategy for developing such ternary photoelectrode generation that possesses higher stability and efficiency towards water-splitting processes.