The efficiency of chemically carbonized rubber wood sawdust for the removal of lead ion from the aqueous stream was investigated by column process. Chemically carbonized rubber wood sawdust was prepared by treating the sawdust with H ₂ SO ₄ and HNO ₃ . Maximum removal of lead ion in column process was found as 38.56 mg/g. The effects of operating parameters such as flow rate, bed depth, concentration, and pH were studied in column mode. Experimental data confirmed that the adsorption capacity increased with the increasing inlet concentration and bed depth and decreased with increasing flow rate. Thomas, Yoon‐Nelson, and Adams‐Bohart models were used to analyze the column experimental data and the relationship between operating parameters. Chemically carbonized rubber wood sawdust was characterized by using Fourier transform infrared spectroscopy. Scanning electron microscope was also utilized for morphological analysis of the adsorbent. Furthermore X‐ray fluorescence spectrum analysis and energy dispersive X‐ray spectroscopy were also used for the confirmation of lead adsorption process.

The performance of a laboratory scale upflow anaerobic sludge blanket (UASB) reactor and its posttreatment unit of sand-chemically carbonized rubber wood sawdust (CCRWSD) column system for the treatment of a metal contaminated municipal wastewater was investigated. Copper ion contaminated municipal wastewater was introduced to a laboratory scale UASB reactor and the effluent from UASB reactor was then followed by treatment with sand-CCRWSD column system. The laboratory scale UASB reactor and column system were observed for a period of 121 days. After the posttreatment column the average removal of monitoring parameters such as copper ion concentration (91.37%), biochemical oxygen demand (BODT) (93.98%), chemical oxygen demand (COD) (95.59%), total suspended solid (TSS) (95.98%), ammonia (80.68%), nitrite (79.71%), nitrate (71.16%), phosphorous (44.77%), total coliform (TC) (99.9%), and fecal coliform (FC) (99.9%) was measured. The characterization of the chemically carbonized rubber wood sawdust was done by scanning electron microscope (SEM), X-ray fluorescence spectrum (XRF), and Fourier transforms infrared spectroscopy (FTIR). Overall the system was found to be an efficient and economical process for the treatment of copper contaminated municipal wastewater.

Calcium pretreated Hevea brasiliensis sawdust has been used as an effective and efficient adsorbent for the removal of copper ion from the contaminated water. Batch experiment was conducted to check the effect of pH, initial concentration, contact time, and adsorbent dose. The results conclude that adsorption capacity of adsorbent was influenced by operating parameters. Maximum adsorption capacity found from the batch adsorption process was 37.74 mg/g at pH of 5.6. Various isotherm models like Langmuir, Freundlich, and Temkin were used to compare the theoretical and experimental data, whereas the pseudo‐first‐order, pseudo‐second‐order, and intraparticle diffusion models were applied to study the kinetics of the batch adsorption process. Dynamic studies were also conducted in packed‐bed column using different bed depths and the maximum adsorption capacity of 34.29 was achieved. Characterizations of the adsorbent were done by Fourier transform infrared spectroscopy, scanning electron microscope, and energy dispersive X‐ray spectroscopy.

Rubber wood sawdust was carbonized into charcoal by chemical treatment which was used for removal of lead ion from aqueous solution. The work involves batch experiments to investigate the pH effect, initial concentration of adsorbate, contact time, and adsorbent dose. Experimental data confirmed that the adsorption capacities increased with increasing inlet concentration and bed height and decreased with increasing flow rate. Adsorption results showed a maximum adsorption capacity of 37 mg/g at 308 K. Langmuir, Freundlich, and Temkin model adsorption isotherm models were applied to analyze the process where Temkin was found as a best fitted model for present study. Simultaneously kinetics of adsorption like pseudo‐first‐order, pseudo‐second‐order, and intraparticle diffusion models were investigated. Thermodynamic parameters were used to analyze the adsorption experiment. Fourier transform infrared spectroscopy, scanning electron microscope, and energy dispersive X‐ray spectroscopy confirmed the batch adsorption of lead ion onto chemically carbonized rubber wood sawdust.