With the increase in demand for metal resources, research on deep-sea polymetallic nodule mining has been reinvigorated, but the problem of its environmental impact cannot be ignored. No matter what method is used for mining, it will disturb the surface sediments of the seabed, thereby increasing the concentration of suspended solid particles and metal ions in the water body, changing the properties of the near-bottom water body and sediments, and affecting biological activity and the living environment. Focusing on the ecological and environmental impacts of deep-sea polymetallic nodule mining, taking as our main subject of focus the dynamic changes in sediments, we investigated the environmental impacts of nodule mining and their relationships with each other. On this basis, certain understandings are summarized relating to the ecological and environmental impacts of deep-sea polymetallic nodule mining, based on changes in the engineering geological properties of sediment, and solutions for current research problems are proposed.

Historically, the Yellow River in China discharges > 1 × 10⁹ ton/yr sediment to the sea, and has formed a large delta in the western Bohai Sea. Its river mouth is characterized by an extremely high suspended sediment concentration (SSC), up to 50 g/L. However, the hydrodynamic factors controlling the high suspended sediments in the Yellow River estuary are not well understood. Here, we conducted two hydrodynamic observations and SSC measurements in the winter and spring low-flow seasons of 2014–2015 and 2016–2017 under five sea conditions, including calm-rippled, smooth-wavelet, slight, moderate, and rough, in the Yellow River Delta-front during the observation period. Under calm-rippled conditions, the contribution of currents to the total resuspended sediment concentration (RSC) was 77.7%–100.0%. During the smooth-wavelet and slight periods, the currents’ contribution decreased as low as 30% and 3.0% of the total RSC, respectively. Under moderate and rough-sea conditions, waves accounted for at least 70% and 85% of the total RSC, respectively. The results indicate that 20 cm-thick lutoclines were created after a significant increase in the wave height to a peak value followed by a decrease. When the SSC is over 3 g/L and hydrodynamic conditions could not break the lutoclines, the flocculent settling of suspended sediment changes to hindered settling in the Yellow River Delta. Under hindered settling, the settling velocity decreases, and the resuspended sediments remains in the lutoclines and their lower water layers. This study reveals different controlling factors for the high SSC near a river-influenced delta, and helps us get a better understanding of a delta’s resuspension and settling mechanisms.

An estuary delta is an area with active human economic activities and a fragile natural ecological environment. With the intensification of global changes and human activities, coastal and seabed erosion around the world is becoming more and more serious. This study compared the hydrodynamic effect and sediment diffusion path at the Yellow River subaqueous delta (river control type) and the Yangtze River subaqueous delta (tide-river type) in the East Asian monsoon area using a Delft 3D numerical simulation to analyse the causes of the distribution of accumulation and erosion landform in the different types of subaqueous deltas. This study found that the river deltas were dominated by the river when the accumulation landforms concentrated in the direction of the Coriolis forces, which was due to hydrodynamic erosion driven by wind, and the sediment diffusion range was mainly concentrated in shallow water areas (water depth < 6 m), resulting the Yellow River subaqueous delta presenting the pattern of “northern erosion and south accumulation”. The Yangtze River subaqueous delta was controlled by tidal effects, making the southern part of the estuary more susceptible to erosion. The research results can not only further deepen the understanding of the physical process and mechanism of erosion and deposition in the subaqueous delta but also provide stronger scientific support for the deltas’ ecological environment protection, geological environment safety, and disaster geology prevention.

With the consumption of terrestrial metal resources, deep-sea polymetallic nodule minerals have been widely exploited around the world. Therefore, the environmental impact of deep-sea polymetallic nodule mining cannot be ignored. In this study, for the first time, a field disturbance and observation device, integrated with multiple sensors, is used to simulate the disturbance process of mining on seabed sediments in the polymetallic nodule area of the western Pacific Ocean at a depth of 5700 m. The impact of the process of stroking and lifting on the bottom sediment in the polymetallic nodule area is 30 times higher than that caused by the waves or the current. The time for turbidity to return to normal after the increase is about 30 min, and the influence distance of a disturbance to the bottom bed on turbidity is about 126 m. The time it takes for density to return to normal is about four hours, and the influence is about 1000 m. At the same time, the resuspension of the bottom sediment leads to an increase in density anomaly and salinity. Moreover, suspended sediments rich in metal ions may react with dissolved oxygen in water, resulting in a decrease in the dissolved oxygen content and an increase in ORP. During the observation period, the phenomenon of a deep-sea reciprocating current is found, which may cause the suspended sediment generated by the continuous operation of the mining vehicle to produce suspended sediment clouds in the water near the bottom of the mining area. This could lead to the continuous increase in nutrients in the water near the bottom of the mining area and the continuous reduction in dissolved oxygen, which will have a significant impact on the local ecological environment. Therefore, the way mining vehicles dig and wash in water bodies could have a marked impact on the marine environment. We suggest adopting the technology of suction and ore separation on mining ships, as well as bringing the separated sediment back to the land for comprehensive utilization.

The estuary delta is an area where human economic activities are active and natural ecological environment is fragile. With global change and the intensification of human activities, coastal and seabed erosion around the world is becoming more and more serious. In this paper, we used the Delft 3D numerical simulation to compare the hydrodynamic effects of sediment transport paths in the Yellow River delta (river-controlled type), Yangtze River delta (tidal type) and Mekong River delta (tidal wave type) in the East Asian monsoon area, and analyzed the causes of accumulation erosion landform distribution in three different types of subaqueous deltas. This study finds the Yellow River Delta has experienced varying degrees of erosion at the estuary, but its subaqueous delta is still dominated by deposition; the Yangtze River Delta has ensured the stability of its shoreline under the influence of artificial shoreline reinforcement, but the subaqueous delta (water depth: 0–15 m) is in a state of erosion all year round; and in the Mekong River Delta the erosion occurs in both its shoreline and subaqueous delta. Additionally, only by analyzing the erosion and deposition within the transport range of resuspended sediment, the changes in the properties of the entire subaqueous delta could be recognized. The research results can not only be helpful to analyze whether the change of river sediment will lead to the change of delta type under human influence, but also provide more powerful scientific support for the protection of delta ecological environment, geological environment safety and geological disaster prevention.