Hui Li

Hui Li


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2020 in Materials
Verified
Journal Article
Open access
PDF file
WLwenhuan Liu
wenhuan Liu
HLHui Li
Hui Li
HZHuimei Zhu
Huimei Zhu
PXPinjing Xu
Pinjing Xu
The interfacial adhesion between asphalt and steel slag aggregate is a decisive factor in the formation of an asphalt–steel slag mixture and significantly affects the quality stability of steel slag–asphalt mixtures. In this study, the adhesion between an asphalt and steel slag aggregate, the interfacial microstructure, the adsorption and desorption characteristics, and chemical reactions were, respectively, explored by a PosiTestAT–A adhesion puller, a scanning electron microscope, a net adsorption test, an infrared spectrometer, and a dynamic shear rheometer. The mechanism of adhesion between the asphalt and steel slag aggregate was analyzed from the perspectives of physical adsorption and chemical reactions. The results showed that different factors had different effects on the adhesion of asphalt–steel slag aggregate interface. The freeze–thaw cycle and steel slag aggregate particle size had significant effects on interfacial adhesion, while the asphalt heating temperature, water bath time, and stirring time had relatively weak effects on interfacial adhesion. Compared to a limestone aggregate, the steel slag–asphalt mixture had greater adhesion and better adhesion performance because the pits and textures on the surface of the steel slag aggregate produced a skeleton–like effect that strengthened the phase strength of the asphalt–slag aggregate interface, thereby improving the adhesion and increasing the physical adsorption between the asphalt and steel slag aggregate. In addition, due to the N–H stretching vibrations of the amines and amides, as well as SiO–H stretching vibrations, a chemical reaction occurred between the asphalt and steel slag aggregate, thus improving the adhesion performance between the asphalt and steel slag. Based on the shape of the adsorption isotherm, it was determined that the adsorption type was multi–molecular layer adsorption, indicating that the adhesion between the asphalt and steel slag mainly involved physical adsorption.

28 July 2021 in Coatings
Verified
Journal Article
Open access
PDF file
FWFeng Wu
Feng Wu
HLHui Li
Hui Li
KYKang Yang
Kang Yang
Coal-gasification slag (CGS) was subjected to mechanical grinding by three different methods. We studied the effects of mechanical activation on various physical and chemical characteristics of the CGS, including particle-size distribution, specific surface area, mineral composition, degree of crystallinity, particle morphology, chemical bonding, surface activity and binding energy, anionic-polymerization degree and hydration properties. The results show that there are different effects on CGS characteristics depending on the type of activation applied. Mechanical activation also can increase the specific surface area and the dissolution rates of activated SiO2 and Al2O3, and the major elements (O, Si, Al, Ca) in CGS, whereas the degree of crystallinity and of polymerization of [SiO4] and [AlO6] are reduced by mechanical activation. We also found that the effects of different mechanical-activation methods on the compressive strength and activity were similar and could accelerate the hydration process.

2 November 2019 in Materials
Verified
Journal Article
Open access
PDF file
WLwenhuan Liu
wenhuan Liu
HLHui Li
Hui Li
HZHuimei Zhu
Huimei Zhu
PXPinjing Xu
Pinjing Xu
Steel slag is an industrial solid waste with the largest output in the world. It has the characteristics of wear resistance, good particle shape, large porosity, etc. At the same time, it has good adhesion characteristics with asphalt. If steel slag is used in asphalt pavement, it not only solves the problem of insufficient quality aggregates in asphalt concrete, but can also give full play to the high hardness and high wear resistance of steel slag to improve the performance of asphalt pavement. In this study, a steel slag aggregate was mixed with road petroleum asphalt to prepare a permeable steel slag–asphalt mixture, which was then compared with the permeable limestone–asphalt mixture. According to the Technical Regulations for Permeable Asphalt Pavement (CJJT 190-2012), the permeability, water stability, and Marshall stability of the prepared asphalt mixtures were tested and analyzed. In addition, the high-temperature stability and expansibility were analyzed according to the Experimental Regulations for Highway Engineering Asphalt and Asphalt Mixture (JTG E20-2011). The chemical composition of the steel slag was tested and analyzed by X-ray fluorescence spectrometer (XRF). The mineral composition of the steel slag was tested and analyzed by X-ray diffractometer (XRD). The asphalt was analyzed by Fourier transform infrared spectroscopy (FTIR). The results show that the steel slag asphalt permeable mixture had good permeability, water stability, and Marshall stability, as well as good high-temperature stability and a low expansion rate. The main mineral composition was ferroferric oxide, the RO phase (RO phase is a broad solid solution formed by melting FeO, MgO, and other divalent metal oxides such as MnO), dicalcium silicate, and tricalcium silicate. In the main chemical composition of steel slag, there was no chemical reaction between aluminum oxide, calcium oxide, silicon dioxide, and asphalt, while ferric oxide chemically reacted with asphalt and formed new organosilicon compounds. The main mineral composition of the steel slag (i.e., triiron tetroxide, dicalcium silicate, and tricalcium silicate) reacted chemically with the asphalt and produced new substances. There was no chemical reaction between the RO phase and asphalt.

27 February 2021 in Materials
Verified
Journal Article
Open access
PDF file
PXPinjing Xu
Pinjing Xu
HLHui Li
Hui Li
YCYanxin Chen
Yanxin Chen
Phosphogypsum (PG) is not only a solid waste discharged from the phosphate fertilizer industry, but also a valuable resource. After high-temperature heat treatment, it can be decomposed into SO2 and CaO; the former can be used to produce sulfuric acid, and the latter can be used as building materials. In this paper, the catalytic thermal decomposition conditions of phosphogypsum were optimized, and the effects of the reaction temperature, reaction atmosphere, reaction time and carbon powder content on the decomposition of phosphogypsum were studied. The research shows that the synergistic effect of carbon powder and CO reducing atmosphere can effectively reduce the decomposition temperature of phosphogypsum. According to the results of the orthogonal test under simulated suspended laboratory conditions, the factors affecting the decomposition rate of phosphogypsum are temperature, time, atmosphere and carbon powder content in turn, and the factors affecting the desulfurization rate are time, temperature, atmosphere and carbon powder content in turn. Under laboratory conditions, the highest decomposition rate and desulfurization rate of phosphogypsum are 97.73% and 97.2%, and the corresponding reaction conditions are as follows: calcination temperature is 1180 °C, calcination time is 15 min, carbon powder content is 4%, and CO concentration is 6%. The results of thermal analysis of phosphogypsum at different temperature rising rates show that the higher the temperature rising rate, the higher the initial temperature of decomposition reaction and the temperature of maximum thermal decomposition rate, but the increase in the temperature rising rate will not reduce the decomposition rate of phosphogypsum.

1 January 2020 in Strategic Study of CAE
Verified
Journal Article
Open access
PDF file
HLHui Li
Hui Li
WZWei Zhao
Wei Zhao
YZYuan Zhou
Yuan Zhou
ZYZiquan Yan
Ziquan Yan
JSJingwei Sun
Jingwei Sun
ZZZhijun Zhang
Zhijun Zhang
To solve the contradiction between ecological protection and the urgent need of improving people's livelihood in the Qinba Mountain Area, current situation of traditional industries in this area and the problems affecting the development of traditional industries are analyzed, and countermeasures for the transformation of traditional industries in the Qinba mountain Area is proposed. We propose that governments in this Area should take high-quality development as the goal, highlight regional comparative advantages, and focus on innovative, clustering, service-oriented, and green development. Characteristic industries should be vigorously developed according to regional advantages, e.g., special local products processing industry, traditional Chinese medicine industry, silk and linen textile and clothing industry, aquatic industry, air industry, health care for the elderly, health maintenance, and leisure tourism industry. Manufacturing industries should be upgraded by improving quality and efficiency, such as aviation, CNC machine tools, automobiles and parts, new materials, and high-tech electronics. High energy-consuming and high pollution industries should be strictly restricted, including coal, minerals, building materials, metallurgy, and heavy chemical industry.