Nanostructured electrodes effectively enhance the kinetics of the charge/discharge process in lithium-ion (Li-ion) batteries. However, the fabrication of these electrodes often involves complex processing steps. This study demonstrates a one-step improved flame spray pyrolysis synthesis approach to directly deposit the most common Li-ion battery cathode material LiNi1/3Mn1/3Co1/3O2 onto current collectors, which is identified as reactive spray deposition technology (RSDT). Because of the economical and continuous nature of RSDT, the industrial scale of manufacturing nanostructured electrodes for Li-ion batteries can be potentially developed. Morphologies of the electrodes are well controlled so that their electrochemical properties can be tailored to accommodate intended applications. In detail, by adjusting the precursor concentration in the solution feed during the operation of RSDT, the specific surface area of synthesized material can be fine-tuned accordingly. Although the electrodes prepared with low precursor concentration exhibit the highest surface area and deliver the highest initial discharge capacity of 192.1 mAh g–1, the most stable cycling performance is demonstrated by the electrodes fabricated with high precursor concentration, retaining 93.6% of the initial capacity after 100 cycles in half-cell testing. This innovative direct deposition method considerably simplifies the manufacture process of high-performance nanostructured electrodes and enables effortless modification of their properties. Moreover, no hazardous waste is generated from this synthesis route.
Alpha phase iron oxidehas been investigated as active anode material for lithium ion batteries because of high theoretical specific capacity, low cost and eco-friendly nature. Porous nanostructured electrode materials directly deposited on current collectors effectively enhance the rate performance of Li-ion batteries. The unique structure provides open channels for electrolyte penetration and short diffusion pathways for Li ions and electrons. In addition, the open spaces can accommodate the large volume change from the repeated conversion reaction of α-Fe2O3 during cycling. A simple and economical manufacturing approach of the nanostructured electrodes is essential to the development and application of the next generation Li-ion batteries. In this study, nanostructured α-Fe2O3 electrodes are fabricated by reactive spray deposition technology (RSDT) which is a single-step flame combustion synthesis method. This process is continuous and scalable. The structure and morphology of as-prepared electrode are investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Electrochemical properties of the nanostructured α-Fe2O3 electrodes are studied using cyclic voltammetry, galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy in half-cell configuration.