In previous work, it has been shown that novel interval-based sliding mode techniques can be employed effectively for the design of guaranteed stabilizing control strategies for high-temperature fuel cells. These control strategies aim at both trajectory tracking during non-stationary heating phases and at compensating disturbances at desired constant operating points. The implementation of the corresponding control strategies involves three main building blocks: (i) transformation of the state equations into a non-linear controller canonical form, (ii) application of interval arithmetic techniques in real time for the computation of stabilizing system inputs despite bounded uncertainty and (iii) an online optimization for the synthesis of the input variables, namely suitable preheater mass flows and temperatures. For practical application, the transformation into the controller canonical form based on the computation of Lie derivatives can be impeded by the complexity of the symbolic representation of the state equations. Hence, techniques for algorithmic differentiation are compared in this contribution with alternative approaches based on symbolic formula manipulation. The latter one is only efficient for low-dimensional finite volume models in the description of thermodynamic system behaviour. Since the interval-based control law involves the use of time derivatives of the measured or estimated system output up to its relative degree, suitable differentiation techniques using low-pass filtered derivatives, algebraic derivative estimation and sensitivity-based approaches conclude this contribution in a numerical comparison.
Cooperativity of uncertain dynamic systems can be exploited to simplify several tasks such as the computation of guaranteed state enclosures, the design of interval observers, forecasting worst-case bounds for selected system outputs in predictive control, and the identification of unknown parameters. Although many system models in biological, chemical, and medical applications are naturally cooperative, there is also a great number of systems (typically from the fields of electric, magnetic, and mechanical applications) which do not show this property if the state equations are derived using first-principle techniques. Hence, it is often desired to transform such system models into an equivalent cooperative form. Unfortunately, these transformations are often not straightforward, especially, if linear systems and nonlinear ones with state-dependent system matrices are subject to bounded parameter uncertainty. This paper presents two approaches for the transformation of state equations into a cooperative form for which the original system models do not fulfill sufficient criteria for cooperativity in their basic formulation. These are a time-invariant transformation for systems with purely real eigenvalues and a time-varying transformation in the case of conjugate-complex eigenvalues. Both procedures are tested on real-life application scenarios with interval parameters.
Neural network models for complex dynamical systems typically do not explicitly account for structural engineering insight and mutual interrelations of various subprocesses that are related to the multi-physics nature of such systems. For that reason, they are commonly interpreted as a kind of data-driven, black box modelling option that is in opposition to a physically inspired equation-based system representation for which suitable parameters are subsequently identified in a grey box sense. To bridge the gap between data-driven and equation-based modelling paradigms, this paper proposes a novel approach for a physics-inspired structuring of neural networks. The derivation of this kind of structuring, an optimal choice of network inputs and numbers of neurons in a hidden layer as well as the achievable modelling accuracy are demonstrated for the thermal and electrochemical behaviour of high-temperature fuel cells. Finally, different network structures are compared against experimental data.
High-temperature fuel cells are one of the devices currently investigated for an integration into distributed power supply grids. Such distributed grids aim at the simultaneous production of thermal energy and electricity. To maximize the efficiency of fuel cell systems, it is reasonable to track the point of maximum electric power production and to operate the system in close vicinity to this point. However, variations of gas mass flows, especially the concentration of hydrogen contained in the anode gas, as well as variations of the internal temperature distribution in the fuel cell stack module lead to the fact that the maximum power point changes in dependence of the aforementioned phenomena. Therefore, this paper first proposes a real-time capable stochastic filter approach for the local identification of the electric power characteristic of the fuel cell. Second, based on this estimate, a maximum power point tracking procedure is derived. It is based on an iteration procedure under consideration of the estimation accuracy of the stochastic filter and adjusts the fuel cell’s electric current so that optimal operating points are guaranteed. Numerical simulations, based on real measured data gathered at a test rig available at the Chair of Mechatronics at the University of Rostock, Germany, conclude this paper.