Coffee beverage known as espresso, must be topped by a velvety thick, reddish-brown foam called crema, to be considered properly prepared and to be appreciated by connoisseurs. In spite of the relevant role played by crema as a quality marker, espresso coffee foam has not yet been the subject of detailed investigations. Only recently, some aspects of the Physics and Chemistry behind the espresso coffee foam have attracted the attention of scientists. In addition to sharing several characteristics with other food foams like beer foam, for instance, the espresso coffee foam may contain solid particles (minute coffee cell-wall fragments), it is subjected to a remarkable temperature gradient and its continuous phase is an oil in water emulsion rendering it a very complex system to be studied. Moreover, in the typical regular espresso coffee cup volume (serving) of 25–30 mL, crema represents at least 10% of the total volume, and this is a limitation in obtaining experimental data by conventional instruments. The present work is aimed at reviewing the literature on espresso coffee foam. The traditional espresso brewing method will be briefly described with emphasis on the steps particularly relevant to foam formation and stabilization. In addition to present up-dated experimental data on surface properties at solid/beverage and air/beverage interface, recent advances on the espresso foam formation mechanism, as well as on foam stability, will be critically examined. The key role played by carbon dioxide generated by roasting and the effects of low and high-molecular-weight coffee compounds in promoting/inhibiting the espresso coffee foam will be discussed and emphasized.

In order to better understand the mechanisms generating genetic diversity in the recent allotetraploid speciesCoffea arabica, here we present a chromosome-level assembly obtained with long read technology. Two genomic compartments with different structural and functional properties are identified in the two homoeologous genomes. The resequencing data from a large set of accessions reveals low intraspecific diversity in the center of origin of the species. Across a limited number of genomic regions, diversity increases in some cultivated genotypes to levels similar to those observed within one of the progenitor species,Coffea canephora, presumably as a consequence of introgressions deriving from the so-called Timor hybrid. It also reveals that, in addition to few, early-occurring exchanges between homoeologous chromosomes, there are numerous recent chromosomal aberrations including aneuploidies, deletions, duplications and exchanges. These events are still polymorphic in the germplasm and could represent a fundamental source of genetic variation in such a lowly variable species.

Natural polyphenols are important dietary antioxidants that significantly benefit human health. Coffee and tea have been shown to largely contribute to the dietary intake of these antioxidants in several populations. More recently, the use of coffee leaves to produce tea has become a potential commercial target, therefore prompting studies on the quantification of polyphenols in coffee leaves. In this study a variety of coffee leaf species, at different development stages, were analyzed using ultra-high pressure liquid chromatography. The results demonstrate that both the botanical origin of the samples and their maturity influence significantly the concentration of the antioxidants; for total chlorogenic acids a two-fold difference was found between different species and up to a three-fold variation was observed between young and mature leaves. Furthermore, the range of concentrations of chlorogenic acids in young leaves (35.7–80.8 mg/g of dry matter) were found to be comparable to the one reported for green coffee beans. The results provide important data from which potential new commercial products can be developed.

In recent years, the circular economy and sustainability have gained attention in the food industry aimed at recycling food industrial waste and residues. For example, several plant-based materials are nowadays used in packaging and biofuel production. Among them, by-products and waste from coffee processing constitute a largely available, low cost, good quality resource. Coffee production includes many steps, in which by-products are generated including coffee pulp, coffee husks, silver skin and spent coffee. This review aims to analyze the reasons why coffee waste can be considered as a valuable source in recycling strategies for the sustainable production of bio-based chemicals, materials and fuels. It addresses the most recent advances in monomer, polymer and plastic filler productions and applications based on the development of viable biorefinery technologies. The exploration of strategies to unlock the potential of this biomass for fuel productions is also revised. Coffee by-products valorization is a clear example of waste biorefinery. Future applications in areas such as biomedicine, food packaging and material technology should be taken into consideration. However, further efforts in techno-economic analysis and the assessment of the feasibility of valorization processes on an industrial scale are needed.

The high cost and environmental impact of fossil-based organic carriers represent a critical bottleneck to their use in large-scale industrial processes. The present study demonstrates the applicability of rice husk as inexpensive renewable carrier for the immobilization of enzymes applicable sectors where the covalent anchorage of the protein is a pre-requisite for preventing protein contamination while assuring the recyclability. Rice husk was oxidized and then functionalized with a di-amino spacer. The morphological characterization shed light on the properties that affect the functionalization processes. Lipase B from Candida antarctica (CaLB) and two commercial asparaginases were immobilized covalently achieving higher immobilization yield than previously reported. All enzymes were immobilized also on commercial epoxy methacrylic resins and the CaLB immobilized on rice husk demonstrated a higher efficiency in the solvent-free polycondensation of dimethylitaconate. CaLB on rice husk appears particularly suitable for applications in highly viscous processes because of the unusual combination of its low density and remarkable mechanical robustness. In the case of the two asparaginases, the biocatalyst immobilized on rice husk performed in aqueous solution at least as efficiently as the enzyme immobilized on methacrylic resins, although the rice husk loaded a lower amount of protein.