Variable camber is an effective method for improving the flight efficiency of large aircraft, and has attracted the attention of researchers. This work focused on the optimization of a variable camber airfoil. First, the influences of the variable camber of the leading and trailing edges on the airfoil aerodynamic performance were investigated using a computational fluid dynamics numerical simulation. An initial database was established for a deep neural network. Second, an iterative algorithm was constructed to optimize the variable camber airfoil in terms of the rotation angle of the leading edge, deflection position of the leading edge, rotation angle of the trailing edge, and deflection position of the trailing edge. A genetic algorithm was used in each iteration to maximize the lift coefficient and lift-to-drag ratio, as predicted using a deep neural network (DNN). The optimal results were validated using Fluent. If the DNN result approximated the Fluent results, the iterative process was stopped. Otherwise, the Fluent results were inserted into the database to update the DNN prediction model. The optimization results showed that the lift-to-drag ratio of the 2D airfoil could be increased by more than 14 when the angle of attack was less than 8° relative to the original airfoil. Furthermore, to validate the 2D optimal results, the optimized 2D airfoil was stretched into 3D, and it was discovered that the aerodynamic performance trend of the 3D airfoil with respect to the angle of attack was basically the same as that of the 2D airfoil. In addition, the corresponding 3D airfoil improved the aerodynamic performance and reduced the noise at a high frequency (by approximately 16 dB). In contrast, the noise in the low and medium frequencies remained unchanged. Therefore, the optimization method and results can provide a reference for the aerodynamic design and acoustic design of large civil aircraft wings.
1 September 2018 in The Journal of the Acoustical Society of America
A general and simple calculation method is presented to investigate the effects of tube shape on the resonant frequency and performance of a resonator. First, the resonant frequency of a variable cross-section resonator is modeled using a transfer matrix. Then, the amplification ratio of the pressure amplitude (ARPA), defined as the ratio of the pressure amplitude at the small end to that at the large end of the resonator, is used to evaluate its performance. The ARPA value for a variable cross-section resonator can be directly calculated from its resonant frequency. It is shown that the ARPA value is closely related to the compression ratio. However, its value is only determined by the resonator itself and is independent of the working conditions. Therefore, the ARPA index is potentially a more convenient tool for evaluating the performance of resonators compared with other indexes. Additionally, the presented method is validated by a comparison with analytical results and experimental data. Moreover, the harmonic frequencies for cylindrical, exponential, conical, half-cosine, 3/4 cosine, and Horn–Cone shape tubes are numerically investigated, in addition to the influence of the resonator shape on the resonance frequency and ARPA. Finally, optimal shape parameters for several types of resonators are suggested.
The acoustic streaming motion in a compressible air-filled two-dimensional cylindrical resonator driving by a piston is simulated by using the gas-kinetic scheme, and the effects of acoustic field intensity on the formation process of flow structure as well as streaming pattern are investigated numerically for the practical applications of high-intensity acoustic devices. Therefore, five cases with different excitation amplitudes are considered in simulation ranging from the linear to highly nonlinear regions. The validation of the developed model is verified by comparing the numerical results of streaming velocities with the theoretical ones for the linear case. The wave form of pressure and velocity and the transient flow field structure as well as the resulting streaming pattern are found to be strongly correlated to the excitation amplitude. Be observed for the linear case is a sine wave and a uniform of quasi-one-dimensional flow field as well as classical Rayleigh streaming. Periodic shock waves and strongly two-dimensional flow fields as well as the irregular acoustic streaming fields have been observed for the nonlinear cases. And some new physical phenomena have also been revealed for the highly nonlinear case, and these facts are that the wave form will deviate from typical “shock wave”-type toward a more distorted type, and at the same time, the two-dimensional transient flow fields are characterized by the changing flow direction and circulatory flow pattern, which are all correlated to a turbulent streaming with various scales of irregular and unsteady vortices throughout the resonator. Detailed explanations are provided for these nonlinear phenomena, and a critical Reynolds number for the transition to turbulence is also numerically obtained which is consistent with the experiment result from the previous publication. The present work has demonstrated that the gas-kinetic scheme is capable of resolving large Reynolds number of nonlinear acoustic problems with no any restriction on the nonlinearity level.