Poly(lactic acid) (PLA)/lignin-containing cellulose nanofibrils (L-CNFs) composite films with different lignin contents were produced bythe solution casting method. The effect of the lignin content on the mechanical, thermal, and crystallinity properties, and PLA/LCNFs interfacial adhesion wereinvestigated by tensile tests, thermogravimetric analysis, differential scanning calorimetry (DSC), dynamic mechanical analysis, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The tensile strength and modulus of the PLA/9-LCNFs (9 wt % lignin LCNFs) composites are 37% and 61% higher than those of pure PLA, respectively. The glass transition temperature (Tg) decreases from 61.2 for pure PLA to 52.6 °C for the PLA/14-LCNFs (14 wt % lignin LCNFs) composite, and the composites have higher thermal stability below 380 °C than pure PLA. The DSC results indicate that the LCNFs, containing different lignin contents, act as a nucleating agent to increase the degree of crystallinity of PLA. The effect of the LCNFs lignin content on the PLA/LCNFs compatibility/adhesion was confirmed by the FTIR, SEM, and Tg results. Increasing the LCNFs lignin content increases the storage modulus of the PLA/LCNFs composites to a maximum for the PLA/9-LCNFs composite. This study shows that the lignin content has a considerable effect on the strength and flexibility of PLA/LCNFs composites.
To improve the thermal resistance, mechanical and tribological properties of a bismaleimide (BMI) resin, a novel hyperbranched polysiloxane with terminal functional amidogen groups (HBPSi-NH2) was prepared through a convenient one-step transesterification process. The raw materials included N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (KH-792) and excessive neopentyl glycol. Both Fourier transform infrared spectroscopy and nuclear magnetic resonance spectra were collected to determine the chemical structure of the HBPSi-NH2. The novel prepared HBPSi-NH2 was then used as a modification phase to blend with BMI (HBPSi-BMI), and the thermal properties of the HBPSi-BMI-cured resins were investigated by differential scanning calorimetry and thermogravimetry. The mechanical and tribological properties of HBPSi-BMI were also researched. The results suggested that both the thermal properties and the mechanical properties of HBPSi-BMI increased with the appropriate addition of HBPSi.
20 November 2021 in Journal of Inorganic and Organometallic Polymers and Materials