The purpose of this study was to compare the removal efficiencies of manganese (Mn) and iron (Fe) using pristine banana peel biochar (BPB) and phosphoric acid pre-treated biochars (PBPB) derived from banana peels. The removal efficiencies of Mn and Fe were investigated under different adsorbent dosages (0.4–2 g L−1), temperatures (15–45 °C), and ionic strengths (0–0.1 M), and were directly correlated to the differences in physicochemical properties of BPB and PBPB, to identify the removal mechanisms of heavy metals by adsorption processes. The removal of Mn by PBPB obeyed the Freundlich isotherm model while the removal of Mn and Fe by BPB followed the Langmuir isotherm model. However, the removal of Fe by PBPB followed both Freundlich and Langmuir isotherm models. The removal efficiencies of Mn and Fe by BPB and PBPB increased with increasing temperatures and decreased with increasing ionic strengths. PBPB more effectively removed Mn and Fe compared to BPB due to its higher content of oxygen-containing functional groups (O/C ratio of PBPB = 0.45; O/C ratio of BPB = 0.01), higher surface area (PBPB = 27.41 m2 g−1; BPB = 11.32 m2 g−1), and slightly greater pore volume (PBPB = 0.03 cm3 g−1; BPB = 0.027 cm3 g−1). These observations clearly show that phosphoric acid pre-treatment can improve the physicochemical properties of biochar prepared from banana peels, which is closely related to the removal of heavy metals by adsorption processes.
Due to advances in desalination technology, desalination has been considered as a practical method to meet the increasing global fresh water demand. This paper explores the status of the desalination industry and research work in South Korea. Desalination plant designs, statistics, and the roadmap for desalination research were analyzed. To reduce energy consumption in desalination, seawater reverse osmosis (SWRO) has been intensively investigated. Recently, alternative desalination technologies, including forward osmosis, pressure-retarded osmosis, membrane distillation, capacitive deionization, renewable-energy-powered desalination, and desalination batteries have also been actively studied. Related major consortium-based desalination research projects and their pilot plants suggest insights into lowering the energy consumption of desalination and mitigation of the environmental impact of SWRO brine as well. Finally, considerations concerning further development are suggested based on the current status of desalination technology in South Korea.
We compared two representative forward osmosis (FO) modules—spiral-wound (SW) and plate-and-frame (PF)—to provide practical information for the selection of FO element for a large-scale FO process. The FO operating performance of commercially available SW FO and PF FO was explored under different membrane area and flow rate conditions. The performance trend as a function of the membrane was obtained by adjusting the number of serially connected elements. Although SW FO and PF FO elements exhibited comparable feed pressure drops, SW FO demonstrated a significantly higher draw channel pressure drop than PF FO. Furthermore, the significant draw pressure drop in SW FO increased the draw inlet pressure, consequently limiting the number of serially connected elements. For example, the maximum number of serially connected elements for the normal operation was three elements for SW FO (45.9 m2) but nine elements for PF FO (63 m2) when the flow rate of 10 LMP was applied for feed and draw streams. Additionally, a footprint analysis indicated that SW FO module exhibited a slightly larger footprint than PF FO. Under investigated conditions, PF FO exhibited relatively better performance than SW FO. Therefore, this pilot-scale FO study highlighted the need to reduce the flow resistance of SW FO draw channel to take advantage of the high packing density of the SW element.
30 September 2019 in Journal of Korean Society of Environmental Engineers
Suspended particulate matter (SPM) is an indispensable component of water environments. Its fate and transport involve various physical and biogeochemical cycles. This paper provides a comprehensive review of SPM dynamics by integrating insights from biogeochemical processes, spatiotemporal observation techniques, and numerical modeling approaches. It also explores methods for diagnosing SPM-mediated biogeochemical processes, such as the flocculation kinetics test and organic matter composition analysis. Advances in remote sensing, in situ monitoring, and high-resolution retrieval algorithms are discussed, highlighting their significance in detecting and quantifying SPM concentrations across varying spatial and temporal scales. Furthermore, this review examines integrated models that incorporate population balance equations on the basis of flocculation kinetics into multi-dimensional sediment transport models. The results from this study provide valuable insights into SPM dynamics, ultimately enhancing our knowledge of SPM behavior and transport in water environments. However, uncertainties remain due to limited field data on flocculation kinetics and the need for parameter optimization in numerical models. Addressing these gaps through enhanced fieldwork and model refinement will significantly improve our ability to predict and manage SPM dynamics, which is critical for sustainable aquatic ecosystem management in an era of rapid environmental change.