In considering structural materials for fusion reactors a detailed understanding of the transport parameters and solubility of hydrogen and its isotopes is an important issue which deal with safety and blanket performance aspects.The experimental activities were focused on the determination of hydrogen/deuterium transport parameters through Eurofer 97 in the temperature range 423+723K using a time dependant permeation technique The hydrogen permeation and diffusivity at room temperature and density of trapping sites were also evaluated using Devanathan’s technique.Hydrogen / deuterium permeation experiments on Eurofer 97 showed a non-negligible decrease in permeability with respect to other fusion oriented martensitic steels, even if it remains about one order of magnitude higher compared with that of austenitic AISI 316L steel.
1 December 1996 in Metallurgical and Materials Transactions A
Hydrogen outgassing is the most significant factor limiting the attainment of outgassing rates below 10−12 mbar l s−1 cm−2 in stainless steel vacuum systems. This limit turns out to be crucial in very large vacuum systems, like the VIRGO vacuum tubes (2 tubes 1.2 m diam, 3000 m length). Heating the raw material at 400 °C in air was suggested as a money saving alternative to the classical vacuum heating at 950 °C. We report the results of hydrogen content analysis performed on stainless steel samples submitted to different treatments, and also the measurement performed on a prototype tube (1.2-m-diam, 48-m-long). We concluded that air bake-out drives out most of the hydrogen absorbed in the bulk stainless steel, while the presence of an oxide layer does not reduce the hydrogen outgassing.