A composite membrane based on polycaprolactone (PCL) and cellulose nanofibers (CNF) with different compositions was prepared using the electro-spinning method, with the objective of developing organic membranes with good mechanical properties to remove contaminants from water. Water is a resource of primary importance for life and human activities. In this sense, cellulose obtained from agave bagasse and polycaprolactone nanofibers was used to prepare membranes that were tested by filtering tap water. The membranes obtained presented a porosity and structure on a nanometric scale. The water quality variables evaluated after filtration with the PCL/CNF membranes showed 100% turbidity removal, 100% conductivity, and heavy metal removal of the order of 75% to 99% for iron and chromium. CNF comprises biowaste derived from tequila production, and it has added value. Electro-spun CNF and PCL membranes can be applied as a “green” and eco-friendly filtration system for water purification.

The bagasse of Agave tequilana Weber is one of the most abundant agroindustrial wastes in the state of Jalisco. However, at the present time, there is no technical use for this waste, and its high availability makes it an environmental problem. The objective of this research was to take advantage of this waste and give it an added value to be used in the elaboration of advanced materials. In this sense, the agave bagasse cellulose was obtained using an organosolv method. To obtain the nanofibrils, the cellulose was passed through 6 cycles of a microfluidizer. The material was classified by FTIR, confirming the presence of the functional groups (O-H, C-H, C-C, and C-O-C), characteristics of cellulose, and the elimination of hemicellulose and lignin present in agave bagasse without treatment. The X-ray diffraction technique allowed the determination of the degree of crystallinity of the cellulose nanofibers, which was 68.5%, with a negative zeta potential of −42 mV. The images from the atomic force microscopy helped for the observation of the degree of fibrillation in the cellulose, and with the software ImageJ, the average diameter of the nanofibers was determined to be 75 ± 5 nm with a relatively uniform length of 1.0–1.2 μm. Finally, by means of thermogravimetric analysis, it was found that the obtained cellulose nanofibers (CNFs) supported high temperatures of thermal decomposition, so it was concluded that due to the diameter of the fibrils, the high resistance to pressure, and elasticity, the nanofibrils obtained in this investigation can be used in the elaboration of advanced materials.

Green materials are emerging as sustainable alternatives in water and wastewater treatment. Due to their biodegradability, renewable origin and low toxicity characteristics, green materials are an alternative to conventional synthetic materials. Green materials include nanomaterials of natural origin, biopolymers and composites that optimize the adsorption and removal of contaminants. The applications of cellulose nanofibers, alginates, chitosan and lignin stand out, as well as functionalized hydrogels and aerogels for the removal of heavy metals, dyes and organic contaminants. The analysis of the mechanisms and processes of contaminant removal and modeling and optimization techniques are included as key emerging tools for the design and optimization of these materials, allowing one to predict properties, simulate interactions and customize solutions. Despite the sustainability benefits of green materials, they face technical and economic challenges, such as scalability, synthesis costs and experimental validation. This work concluded that green materials, combined with modeling and optimization tools, are essential to move towards more sustainable, efficient and environmentally friendly water treatment technologies, aligned with global objectives of sustainable development and climate change mitigation.

Pineapple waste is an underexplored source for producing nanocomposites, from which nanocellulose, namely cellulose nanocrystals (CNCs) or cellulose nanofibers (CNFs), can be produced. This review summarizes extraction methods from different pineapple residues (leaves, crown leaves, stem, peel, pulp, and pomace), covering top-down processes (hydrolysis, oxidation, carboxymethylation, and mechanical fibrillation) and bottom-up strategies (ionic liquids and deep eutectic solvents). The review examines the influence of the morphology and crystallinity of nanocellulose on the functional performance of the nanocomposites. Strategies for processing pineapple-derived nanocellulose composites are analyzed by technique (solution casting, film stacking, and melt blending/extrusion) and polymer matrices (starch, PVA, chitosan, PLA, PHBV, PBAT, proteins, and polysaccharides), including typical loading levels for most polymer-reinforced systems (0.5–5 wt.%), while higher levels (15–50 wt.%) are used in particular cases such as PVA, CMC, and cellulosic matrices. The impact on mechanical strength, barrier behavior, UV shielding, and optical properties is summarized, along with reports of self-reinforced and hybrid cellulose-derived matrices. A benchmarking section was prepared to show nanocellulose loading ranges, trends in properties, and processing-relevant information categorized by type of matrix. Finally, the review describes the potential roles of pineapple waste within a bioeconomy context and identifies some extraction by-products that could be incorporated into diverse value chains.

The growing global population and increasing water demand have intensified the urgency for efficient wastewater treatment strategies to address environmental pollution and water scarcity. Physicochemical treatment technologies remain among the most widely implemented solutions due to their high removal efficiency, operational simplicity, and relatively low cost. These processes effectively target a broad spectrum of contaminants—including suspended solids, heavy metals, recalcitrant organic compounds, and high salinity—through unit operations such as coagulation, flocculation, adsorption, and filtration. Nevertheless, they often generate concentrated waste streams that present significant disposal and environmental challenges. Applying these technologies within a circular economy framework enables wastewater reuse, resource recovery, and a reduced environmental impact. Circular strategies enable the recovery and reuse of water, energy, and materials, converting waste into valuable resources. Treated water can be safely reused, while by-products such as biogas and nutrients (e.g., phosphorus, nitrogen, and organic carbon) can be recovered and reintegrated into agricultural and industrial processes. Furthermore, advanced methods such as membrane separation and electrochemical treatments allow for the selective recovery of high-value metals. This review analyzes key physicochemical technologies for wastewater treatment and evaluates their integration into circular economy models, with a focus on waste valorization, resource recovery, and environmental impact reduction. By adopting circular approaches, wastewater treatment systems can enhance sustainability, improve economic performance, and contribute to achieving the global water and sanitation target.