This study introduces a newly developed cladding device, through printing AISI 1045 carbon steel as single and double layers onto American Society for Testing and Materials (ASTM) H13 tool steel plate. In this study, the mechanical and tribological characteristics of single and double layers were experimentally investigated. Both layers were polished first and then subjected to ultrasonic nanocrystal surface modification (UNSM) treatment to improve the mechanical and tribological characteristics. Surface roughness, surface hardness and depth profile measurements, and X-ray diffraction (XRD) analysis of the polished and UNSM-treated layers were carried out. After tribological tests, the wear tracks of both layers were characterized by scanning electron microscopy (SEM) along with energy-dispersive X-ray spectroscopy (EDX). The surface roughness (Ra and Rz) of the single and double UNSM-treated layers was reduced 74.6% and 85.9% compared to those of both the as-received layers, respectively. In addition, the surface hardness of the single and double layers was dramatically increased, by approximately 23.6% and 23.4% after UNSM treatment, respectively. There was no significant reduction in friction coefficient of both the UNSM-treated layers, but the wear resistance of the single and double UNSM-treated layers was enhanced by approximately 9.4% and 19.3% compared to the single and double polished layers, respectively. It can be concluded that UNSM treatment was capable of improving the mechanical and tribological characteristics of both layers. The newly developed cladding device can be used as an alternative additive manufacturing (AM) method, but efforts and upgrades need to progress in order to increase the productivity of the device and also improve the quality of the layers.
In this work, the effect of ultrasonic nanocrystal surface modification (UNSM) treatment at room and high temperatures (RT and HT) on the high-frequency fatigue behavior of Inconel 718 alloy fabricated by laser metal deposition (LMD) process was experimentally investigated. UNSM treatment at RT and HT modified a surface morphology and produced a nanostructured surface layer with a thickness of approximately 120 and 140 µm, respectively. The surface roughness of the untreated sample was reduced, while the surface hardness was notably increased after the UNSM treatment at RT and HT. Both increased with increasing the UNSM treatment temperature. Fatigue behavior of the untreated samples at various stress levels was slightly improved after the UNSM treatment at RT and HT. This is mainly due to the formation of a fine grained nanostructured surface layer with reduced porosity and highly induced compressive residual stress. Fatigue mechanisms of the samples were comprehensively discussed based on the quantitative SEM fractographic analysis.
Additive Manufacturing (AM) which also known as metal 3D printing technique is a promising process with a massive potential for developing a component for wide range applications for various industries such as automotive, aerospace, power plants, etc. Recently, AM technique was introduced to the nuclear power plant industry as AM is capable to manufacture the substitution of aging
Additive Manufacturing which also known as metal 3D printing technique is one of the promising manufacturing processes due to the capability to process a complex geometry component. This can be implemented in wide range of applications in various industries such as automotive, aerospace, power plants, etc. Recently, the additive manufacturing process has been studied and applied