Polymer industries highly use thermoplastic polymer materials due to their low cost and attractive physical, mechanical and thermal properties. Polypropylene (PP) is the widely used thermoplastic material in the world today. Various developmental research works have been conducted by many researchers to improve the thermal and mechanical properties of polypropylene based composites materials. Cellulose can be used as a reinforcement agent in polypropylene based composites. In this research work, microcrystalline cellulose (MCC) reinforced and nanocrystalline cellulose (NCC) reinforced polypropylene based composites were prepared. The MCC and NCC were subjected to the surface modification to improve compatibility with the polypropylene. Surface modified MCC and NCC were mixed with polypropylene using laboratory scale internal mixture. Test samples based on MCC and NCC mixed with polypropylene were prepared by using compression molding technique. Tensile, impact, hardness and water absorption tests were performed in order to analyze the physical and mechanical properties. Scanning electron microscopic images, Fourier-transform infrared spectra and Differential Thermal Analysis were used to characterize developed composites. Samples containing NCC showed the increase of tensile strength and hardness with compared to samples containing pure polypropylene and MCC. Samples containing NCC and MCC showed the slightly reduction of thermal stability than pure polypropylene. However, NCC with polypropylene samples showed the higher thermal stability than MCC with polypropylene samples.
Modern days, in food industry significant attention has paid to secure food quality, safety and shelf-life. Microbial growth is the major cause of food spoilage which reduces shelf life of food. Food packaging plays a major role in preserving food and maintaining the quality. Food packaging combines with antimicrobial activities are now in demand in food industry due to growing concerns on food quality. As some inorganic nano materials show extensive antimicrobial activity incorporation of them into food packaging exhibit enhanced food quality. These studies have been focused on establishing methods for preparation of antibacterial nano coating for polymer based food packaging. Nanosilver has widely been used in antimicrobial films. For this study nanosilver based polyvinyl alcohol coating was prepared on polypropylene food packaging material. Ultra Violet rays were used to contact on the polymer surface in order to enhance the adherence of nano coating to the polypropylene surface. Load required to peel off the nano coating and wetting angles of the modified surface was measured to determine the optimum Ultra Violet rays exposure time. Thermo Gravimetric Analysis (TGA) was used to optimize the crosslinking of the Coating. Presence of nanosilver particles in the developed coating was confirmed by Scanning Electron Microscopy (SEM). The coating was tested against Escherichia coli. The novel nanosilver coated polypropylene food packaging showed significant the antibacterial activity. This developed antimicrobial product can be used to protect the food and reduce the waste in near future.
Rice is the main agricultural food in Sri Lanka today. Paddy crops are cultivated as a wetland crop in all the districts. Rice straw is a waste product of the rice harvest that is generated in equal or greater quantities than the rice itself. Despite these larger quantities, rice straw is frequently burned in open air by farmers which makes it a significant source of pollution. In the search for possible uses of rice straw, it was found that rice straw contains considerable amount of cellulose which pave the way for the production of cellulose. This study mainly focuses on the synthesis and characterization of cellulose from rice straws of most frequently used traditional (Suwandel, Raththal) and technically modified (BG300, BG352) rice varieties in Sri Lanka. Up to date, pure cellulose has been separately isolated from rice straws of above mentioned four rice varieties after following a three-step de-waxing, delignification and hemicellulose (and silica) removal process. The formation of pure cellulose and complete removal of non-cellulosic materials from rice straw was confirmed by FTIR spectroscopy after each chemical purification step. Highest cellulose yield was observed from rice straws of Suwandel variety (35.2%). Other rice varieties showed cellulose yield BG352 (29.3%), BG300 (27.9%) and Raththal (25.1%).
Polymer matrix composites are used in most of the engineering structures today. This type of composite consists of reinforcing materials in polymer matrix. There is an increasing demand for environmentally friendly reinforcing materials to reduce the cost of traditional fibers. Cellulose is a natural polymer material. Cellulose is used as filler for the reinforcement of polymer materials. Microcrystalline cellulose is a branch of cellulose. Objective of this research is to develop and characterize polypropylene and microcrystalline cellulose based composite. Silane surface modification technique was used to modify the cellulose surface. Surface modified cellulose was mixed polypropylene materials with different compositions. Physical and mechanical properties of the developed product were measured by tensile, impact, hardness, density and water absorption tests. According to the experimental results, there is a gradual reinforcing effect with increase of cellulose concentration. Water absorption and hardness results showed increase of water absorption and hardness with increase of cellulose concentration. There is a gradual reduction of density of the develop product with increase of cellulose concentration. 5 wt% sample showed the lowest density value and weight reduction is about 13%. This type of composite can be used for light weight structure design especially in load bearing applications.
Increasing demands of property enhance materials lead to acquire advancement of nanomaterials. Therefore, interest in nanocellulose has been increasing exponentially in recent years. Out of two categories of nanocellulose, nanofibrillated cellulose has gained more attention than nanocrystalline cellulose due to attractive properties such as mechanical, reinforcing and aspect ratio. Reinforcement of nanofibrillated cellulose with synthetic polymers produce nanocomposite with enhanced properties than pure material. Polypropylene is one of the widely used hydrophobic thermoplastic materials and nanofibrillated cellulose is hydrophilic in nature. Therefore, surface modification of nanofibrillated cellulose is necessary for better performances. In the present paper discuss mechanical, thermal and water absorption properties of polypropylene composites with up to 5% loading of silane surface modified nanofibrillated cellulose. Scanning electron microscopic images, Fourier-transform infrared spectra, X-ray diffractograms and thermal gravimetric analysis were used to analyze the properties. The best properties were given by the 3.5% nanofibrillated cellulose reinforced polypropylene composite and hardness, tensile and impact strength values are respectively 7.4%, 12.6%, and 86.1% higher than the neat polypropylene.