The increased integration of Electric Vehicles (EVs) into the distribution network can create severe issues—especially when demand response programs and time-varying electricity prices are applied, EVs tend to charge during the off-peak time to minimize the electricity cost. Hence, another peak demand might be created, and other solutions are required. Many researchers tried to solve the problem; however, limitations exist because of the decentralized topology of the network. The system operator is not allowed to control the end-users’ load due to security and privacy issues. To overcome this situation, we propose a novel data-energy management algorithm on the transformer’s level that controls the power demand profiles of the householders and exchange energy between them without violating their privacy and security. Our method is compared to an existing one in the literature based on a decentralized control strategy. Simulations show that our approach has reduced the electricity cost of the end-users by 3%, increased the revenue of the system operator, and reduced techno-economic losses by 50% and 42%, respectively. Our strategy shows better performance even with a 100% penetration level of EVs on the network, in which it respects the network’s constraints and maintains the voltage within the recommended limits.

In the literature, many optimization algorithms were developed to control electrical loads, especially Electric Vehicles (EVs) in buildings. Despite the success of the existing algorithms in improving the power profile of charging EVs and reducing the total electricity bill of the end-users, these algorithms didn’t show significant contribution in improving the voltage profile on the network, especially with the existence of highly inductive loads. The control of the active power may not be sufficient to regulate the voltage, even if sophisticated optimization algorithms and control strategies are used. To fill the gap in the literature, we propose a new algorithm that is able to control both the active and reactive power flows using electric vehicles in buildings and homes. The algorithm is composed of two parts; the first part uses optimization to control the active power and minimize the electricity bill, while the second part controls the reactive power using the bidirectional converter in the EV in a way that the voltage profile on the distribution transformer respects its limits. The new approach is validated through a comparative study of four different scenarios, (i) without EV, (ii) with EV using uncoordinated charging, (iii) with EV using coordinated charging, (iv) with EV using our proposed algorithm. Results show that our algorithm has maintained the voltage within the recommended limits, and it has minimized the peak load, the electricity cost, and the techno-economic losses on the network.