Interest in piezoelectric nanocomposites has been vastly growing in the energy harvesting field. They are applied in wearable electronics, mechanical actuators, and electromechanical membranes. In this research work, nanocomposite membranes of different blend ratios from PVDF and TPU have been synthesized. The PVDF is responsible for piezoelectric performance where it is one of the promising polymeric organic materials containing β-sheets, to convert applied mechanical stress into electric voltage. In addition, the TPU is widely used in the plastic industry due to its superior elasticity. Our work investigates the piezoresponse analysis for different blending ratios of PVDF/TPU. It has been found that TPU blending ratios of 15–17.5% give higher output voltage at different stresses conditions along with higher piezosensitivity. Then, TPU addition with its superior mechanical elasticity can partially compensate PVDF to enhance the piezoelectric response of the PVDF/TPU nanocomposite mats. This work can help reducing the amount of added PVDF in piezoelectric membranes with enhanced piezo sensitivity and mechanical elasticity.

Tremendous research efforts have been directed toward developing polymer-based piezoelectric nanogenerators (PENG) in a promising step to investigate self-charging powered systems (SCPSs) and consequently, support the need for flexible, intelligent, and ultra-compact wearable electronic devices. In our work, electrospun polyvinylidene fluoride (PVDF) nanofiber mats were investigated while graphene oxide (GO) was added with different concentrations (from 0 to 3 wt.%). Sonication treatment was introduced for 5 min to GO nanosheets before combined PVDF solution. A comprehensive study was conducted to examine the GO incremental effect. Microstructural and mechanical properties were examined using a scanning electron microscope (SEM) and a texture analyzer. Moreover, piezoelectric properties were assessed via various tests including impulse response, frequency effect, d₃₃ coefficient, charging and discharging analysis, and sawyer tower circuit. Experimental results indicate that incorporation of GO nanosheets enhances piezoelectric properties for all concentrations, which was linked to the increase in β phase inside the nanofibers, which has a significant potential of enhancing nanogenerator performance. PVDF-GO 1.5 wt.% shows a notably higher enhancing effect where the electroactive β-phase and γ-phase are recorded to be boosted to ~ 68.13%, as well as piezoelectric coefficient (d₃₃ ~ 55.57 pC/N). Furthermore, increasing impact force encouraged the output voltage. Also noted that the delivered open circuit voltage is ~ 3671 V/g and the power density is ~ 150 µw/cm². It was observed that GO of concentration 1.5 wt.% recorded a conversion efficiency of ~ 74.73%. All results are in line, showing better performance for PVDF-GO 1.5 wt.% for almost all concentrations.

Poly (vinylidene fluoride) nanofibers (PVDF NFs) have been extensively used in energy harvesting applications due to their promising piezoresponse characteristics. However, the mechanical properties of the generated fibers are still lacking. Therefore, we are presenting in this work a promising improvement in the elasticity properties of PVDF nanofibrous membrane through thermoplastic polyurethane (TPU) additives. Morphological, physical, and mechanical analyses were performed for membranes developed from different blend ratios. Then, the impact of added weight ratio of TPU on the piezoelectric response of the formed nanofibrous composite membranes was studied. The piezoelectric characteristics were studied through impulse loading testing where the electric voltage had been detected under applied mass weights. Piezoelectric characteristics were investigated further through a pressure mode test the developed nanofibrous composite membranes were found to be mechanically deformed under applied electric potential. This work introduces promising high elastic piezoelectric materials that can be used in a wide variety of applications including energy harvesting, wearable electronics, self-cleaning filters, and motion/vibration sensors.

This review article highlights the methods and principles used for PVDF nanofiber creation and the use of these nanofibers in different fields by utilizing its piezoelectric performance, etc. The studies include different techniques to improve the alignment and piezoelectric behavior of nanofibers. The pressure versus sensitivity behavior of PVDF substrate is thoroughly analyzed. The optimum conditions (of experimental parameters) of the electrospinning technique are carefully studied to improve the structure, alignment, and performance of the generated nanofiber mats. In addition to experimental methods, the preparation of nanocomposites with carbon nanotubes (CNTs) also can improve the structure, alignment, and piezoelectric performance. The characterization tools used for the analyses of fabricated nanofibers are also discussed, in addition, to analyze the piezoelectric results of the targeted nanocomposite.