In order to increase the driving range of battery electric vehicles, while maintaining a high level of thermal comfort inside the passenger cabin, it is necessary to design an energy management system which optimally synthesizes multiple control actions of heating, ventilation and air-conditioning (HVAC) system. To gain an insight into optimal control actions and set a control benchmark, the paper first proposes an algorithm of dynamic programming (DP)-based optimisation of HVAC control variables, which minimises the conflicting criteria of passenger thermal comfort and HVAC efficiency. Next, a hierarchical structure of thermal comfort control system is proposed, which consists of optimised low-level feedback controllers, optimisation-based control allocation algorithm that sets references for the low-level controllers, and a superimposed cabin temperature controller that commands the cooling capacity to the allocation algorithm. Finally, the overall control system is verified by simulation for cool-down scenario, and the simulation results are compared with the DP benchmark. The results show that the control system behaviour can approach the DP benchmark if the superimposed controller bandwidth is tuned along with the allocation cost function weighting coefficients, where a fast controller tuning relates to better thermal comfort while a slow tuning results in improved efficiency.
The recently developed LuGre model describes the three-dimensional tyre friction dynamics given in the brush representation. The model has a three-state lumped-parameter form and an analytical solution for tyre static curves. It is simplified using the assumption of a constant slip speed along the contact patch length. This assumption is abandoned in this paper in order to extend the model with several secondary but potentially important effects such as camber, carcass compliance, conicity, ply steer and rolling resistance. Two approaches to the introduction of a variable-slip-speed effect are considered. The first is based on stepwise approximation of the slip speed along the contact patch length, and the second includes a specific, spatially distributed additive deflection term. Both approaches preserve the three-state lumped-parameter model form and an analytical steady-state solution. Qualitative and quantitative validation results point to consistency and benefits of the proposed model extensions.
31 May 2005 in Journal of Dynamic Systems, Measurement, and Control
A control-oriented model of a typical four-speed automatic transmission is developed by using the bond graph modeling method. The planetary gear set model utilizes the Karnopp friction model for hydraulic and one-way clutches, in order to provide a favorable computing efficiency. The full gear set model is reduced for various phases of the park/reverse and park/drive engagements. The reduced gear set models and linearized torque converter model are used as a basis for an algebraic analysis of the engagement dynamics. The analysis is originally conducted for the basic case of fully applied brake, and it is then extended by an analysis of the influence of wheel dynamics in the brake-off case. The analysis results are verified by computer simulations and experiments.
Modern electric vehicle heating, ventilation, and air-conditioning (HVAC) systems operate in more efficient heat pump mode, thus, improving the driving range under cold ambient conditions. Coupling those HVAC systems with novel heating technologies such as infrared heating panels (IRP) results in a complex system with multiple actuators, which needs to be optimally coordinated to maximise the efficiency and comfort. The paper presents a multi-objective genetic algorithm-based control input allocation method, which relies on a multi-physical HVAC model and a CFD-evaluated cabin airflow distribution model implemented in Dymola. The considered control inputs include the cabin inlet air temperature, blower and radiator fan air mass flows, secondary coolant loop pump speeds, and IRP control settings. The optimisation objective is to minimise total electric power consumption and thermal comfort described by predictive mean vote (PMV) index. Optimisation results indicate that HVAC and IRP controls are effectively decoupled, and that a significant reduction of power consumption (typically from 20% to 30%) can be achieved using IRPs while maintaining the same level of thermal comfort. The previously proposed hierarchical HVAC control strategy is parameterised and extended with a PMV-based controller acting via IRP control inputs. The performance is verified through simulations in a heat-up scenario, and the power consumption reduction potential is analysed for different cabin air temperature setpoints.