This study introduces a predictive-maintenance framework for aircraft engines that integrates accurate remaining-useful-life (RUL) estimation with a cost-aware scheduling strategy. The predictive layer employs ensemble learning by combining LightGBM, CatBoost, and Gradient Boosting, thereby enhancing both accuracy and stability. The scheduling layer initiates maintenance once the predicted RUL falls below a tunable threshold $$\tau$$ (set to 15 cycles in experiments) and allocates service slots under cost and risk tolerance constraints, ensuring flexibility for conservative operation when necessary. The framework is evaluated on the NASA C-MAPSS dataset (FD001–FD004), covering single- and multi-condition as well as single- and multi-fault scenarios. Experimental results demonstrate strong performance on FD001 and FD003, with competitive results on FD002 and FD004. For instance, the LightGBM+CatBoost ensemble achieves RMSE = 6.62 and RUL Score = $$2.951 \times 10^{3}$$ on FD001, while the three-model ensemble yields RMSE = 9.71 and RUL Score = $$1.037 \times 10^{4}$$ on FD003. To ensure transparency and reliability, SHAP-based interpretability analysis is applied, highlighting critical sensors and operational cycles. The ensemble approach provides more balanced attributions, which enhances auditability and supports engineering validation in safety-critical domains. Overall, this study contributes to aviation predictive maintenance by delivering robust and interpretable RUL predictions and by translating them into tunable maintenance policies; however, these contributions are demonstrated on C-MAPSS and with a fixed illustrative threshold, so the reported gains should be interpreted as benchmark-specific until confirmed on real fleets and under alternative risk-aware policies.
There are no large-scale deployments to navigate the people indoor environments as the GPS for outdoor environments. Though, high accurate rate indoor localization has been considered the potential research areas by both academia and industry in last decade. These indoor localization research studies are divided into two groups in the literature which are reader-based and tag-based systems. Most of these studies are reader-based. These readers and tags can determine received signal strength levels of the signal using radio frequency technology. We present a tag-based and cost-effective indoor localization system using NRF24L series radio modules. Different from the available tag-based systems, we propose smart transmit power scheme run in the tags called SmartTag. The SmartTag provides communication with the nearest reader using different power levels. However, existing tag-based methods require the RSSI information to achieve high localization accuracy. Our proposed system eliminates RSSI information with the SmartTag. We have developed a simulation of the prototype system, and we used Monte Carlo simulations in many different scenarios. We have also implemented the system prototype and conducted in an actual indoor environment to demonstrate the performance of the SmartTag by comparing with the Monte Carlo simulations. From the indoor experimental results, we confirm that the detections of room and objects are accurate and positioning accuracy is improved thanks to the SmartTag localization. If we briefly summarize our work, we have determined the position in indoor environments by communicating with the nearest reader in the medium thanks to the scheme on the SmartTag.
The number of multi-storey building complex is increasing every day. Nowadays, widely used in the navigation system's position in the open space is provided by Global Positioning Satellite System GNSS. Unfortunately, the direct use of GNSS systems in indoor areas is not possible. Many technologies in the field of indoor location determination (Wireless, RF(Radio Frequency), Bluetooth, ...) have been used. This article aims to develop a minimal cost indoor positioning system. The proposed system to avoid the cost (to capture the minimum cost) to RSSI (Received Signal Strength Indicator) value using the integrated high cost of communication is used. Is not very much affected by noise RSSI information in the system used in the study. Is of vital importance to reduce signal noise projects naturally. Kalman filter system for reducing noise signal is added. The adjusted value of the noise signal in the article and the values passed to the Kalman Filter will be examined and compared.
20 February 2026 in Artificial Intelligence for Engineering Design, Analysis and Manufacturing
This study assesses classification-based predictive maintenance (PdM) for aircraft engines on the NASA Commercial Modular Aero-Propulsion System Simulation dataset and addresses the lack of wide-scope, unified benchmarks. PdM is cast as a short-term binary task – predicting whether an engine will fail within the next 30 cycles – and a comparison is conducted across 10 machine-learning models (Logistic Regression, Decision Tree, Random Forest, Support Vector Machine, k-Nearest Neighbor, Naïve Bayes, Extreme Gradient Boosting, LightGBM, CatBoost, and Gradient Boosting) and 3 deep-learning models (Multilayer Perceptron, Gated Recurrent Unit, and Long Short-Term Memory). A leakage-aware pipeline applies Min–Max scaling; class imbalance is handled with Synthetic Minority Over-sampling Technique where appropriate; hyperparameters are tuned via GridSearchCV/BayesSearchCV; and performance is reported with accuracy, precision, recall, F1-score, and receiver operating characteristic–area under the curve (ROC–AUC), complemented by Shapley Additive Explanations (SHAP) explainability and nonparametric significance tests. Sequence models delivered the strongest performance: LSTM achieved Accuracy = 0.981 (Macro-F1 = 0.92; ROC–AUC = 0.96), and GRU achieved ROC–AUC = 0.97 with Accuracy = 0.975 . Among classical learners, LightGBM reached Accuracy = 0.972 (Macro-F1 = 0.86; ROC–AUC = 0.93). These gains over weaker baselines were statistically significant across folds. Framing PdM as near-term failure classification yields operationally interpretable alerts. Models that explicitly capture temporal dependencies (GRU/LSTM) best track short-horizon failure dynamics, while gradient-boosted trees offer competitive, lightweight alternatives. The benchmark and analysis (including SHAP) provide a reproducible reference for model selection in aviation PdM.
1 January 2024 in Afyon Kocatepe University Journal of Sciences and Engineering
Kusur tespiti yapan sistemlerin tasarımındaki en büyük zorluklardan biri tasarlanan sistemin ne tür kusurlar üzerinde kullanılacağı ve hangi görüntü işleme yöntemlerini kullanacağı belirsizliğidir. Çizik çeşitleri, farklı türde yüzey aşınmaları ve gerçek zamanlı işleme ihtiyacı görüntü işleme ile yapılan kusur tespitinin önündeki zorlayıcı etmenlerden bazılarıdır. Tipik olarak, kusur analizi problemlerini ele almak için istatistiksel, spektral ve model tabanlı yaklaşımlar kullanılabilir. Model tabanlı tekniklerin güçlü bir alt kümesi olan makine öğrenimi, kusur analizinde giderek daha popüler hale gelmiştir. Bu çalışmada LPG dolum tesislerinde kullanılan LPG tüplerinin yüzeylerinde meydana gelen bozulmaların ve kusurların tespit edilmesi amaçlanmıştır. Meydana gelen bozulmalar tüplerin okunabilirliğini azalttığı gibi tüp okuma işlemlerinin doğruluğunu da azaltmaktadır bu sebeple bu bozulmaların tespit edilmesi sistemin doğruluğu açısından büyük önem taşımaktadır. Gerçek zamanlı çalışma hızına sahip olması amacıyla görüntü işleme ve makine öğrenmesi algoritmaları kullanılan yöntem bu yönüyle literatürdeki diğer çalışmalardan ayrılmaktadır. Yöntem, fabrika ortamında oluşturulan veri seti üzerinde uygulanmıştır. Çalışmamızda, temiz olarak tanımlanan LPG tüpleri için kirlilik oranı 2%'den düşük bulunmuştur ve bu tüplerin doğruluk değerlerinin standart sapması ortalama 0.27'dir. Buna karşılık, kirli olarak tanımlanan tüplerde ortalama kirlilik oranı 18% olarak tespit edilmiş ve bu tüplerin standart sapması 2.03 olarak hesaplanmıştır.
31 December 2018 in Bilge International Journal of Science and Technology Research
Hasta sağlığı izleme uygulamaları halk sağlığının çok önemli bir parçasını oluşturmaktadır. Bu uygulamalar aracılığıyla hastaların kimlik bilgileri, hastalık bilgileri, tedavi ve tedavi takip bilgileri saklanmaktadır. Bu sistemler tıbbi birimlerin tamamını kapsayacak şekilde tasarlanabildiği gibi farklı birimlere özgü olarak da tasarlanabilmektedir. Bu çalışma da senoloji alanında uzun zamandır çalışmalar gerçekleştiren Senaturk Akademisi için geliştirilmiş olan göğüs sağlığı izleme uygulamasının kullanılabilirlik değerlendirmesi gerçekleştirilmiştir. Kullanılabilirlik değerlendirmesi için ilk olarak sağlık izleme uygulamasının amacına uygun olarak on farklı görevden oluşan bir görev listesi oluşturulmuştur ve farklı eğitim düzeylerindeki toplam on üç katılımcı ile analizler gerçekleştirilmiştir. Katılımcılar verilen görevleri tamamladıktan sonra, geliştirilen hasta bilgi sisteminin genel olarak değerlendirilmesini sağlamak amacıyla Bilgisayar Sistemleri Kullanılabilirlik anketinin, Türkçe kısa sürümü kullanılmıştır. Veriler elde edildikten sonra kullanıcıların işlem süreleri göz önünde bulundurularak görev tamamlama oranları ve tıklama sayıları analiz edilmiştir. Son olarak uygulanan anket üzerinden uygulamaya ait sistem kullanışlılığı, bilgi kalitesi, arayüz kalitesi ve genel memnuniyet değerleri elde edilmiştir ve bu değerler ile kullanıcılara ait demografik veriler arasındaki ilişki Kruskal Wallis H Testi ve Mann Whitney U testleri kullanılarak tespit edilmiştir. Kullanıcıların genel olarak uygulamayı kullanmaktan memnun oldukları gözlenmiştir ancak sistemdeki hata mesajlarının daha açıklayıcı olması gerektiği tespit edilmiştir. Bunun yanında bilgisayar kullanımı süresiyle, sistem verimliliği ve arayüz kalitesi açısından anlamlı bir ilişki olduğu tespit edilmiştir.