Substantial progress has been made in understanding and reducing temperature inhomogeneity in rapid compression machines (RCMs) with the help of computational modeling. To date, however, it has not been possible to investigate and map the full range of possible RCM designs, working gases, and operating conditions. In this work, we present a framework which simplifies the task of comprehensive and general RCM performance prediction. A set of thermophysical and geometrical parameters has been defined to characterize the design and operating conditions of a general RCM. Dimensional analysis was applied to reduce the number of variables, and a sensitivity analysis, based on computational simulations, was used to rank the dimensionless parameters and eliminate unimportant ones. The results of this analysis show that Reynolds number, Prandtl number, aspect ratio, and crevice volume ratio are the most important parameters determining temperature inhomogeneity. A further set of computational simulations was conducted to predict postcompression temperature inhomogeneity over the full range of RCM design and operating parameters. These results are well-represented by a simple power-law equation that correlates a dimensionless temperature inhomogeneity parameter (mass-averaged over the main chamber) as a function of postcompression time with just three parameters—Peclet number (the product of Reynolds and Prandtl numbers), aspect ratio, and crevice volume ratio. This equation can serve as a simple and general tool for RCM designers and users who wish to determine optimal configurations that minimize temperature inhomogeneity for combustion experiments.
20 September 2019 in Journal of Engineering for Gas Turbines and Power
Uncertainty quantification (UQ) is becoming an essential attribute for development of computational tools in gas turbine combustion systems. Prediction of emissions with a variety of gaseous fuels and uncertain conditions requires probabilistic modeling tools, especially at part load conditions. The aim of this paper was to develop a computationally efficient tool to integrate uncertainty, sensitivity, and reliability analyses of CO and NOx emissions for a practical swirl-stabilized premixed burner. Sampling-based method (SBM), nonintrusive polynomial chaos expansion (NIPCE) based on point collocation method (PCM), Sobol sensitivity indices, and first-order reliability method (FORM) approaches are integrated with a chemical reactor network (CRN) model to develop a UQ-enabled emissions prediction tool. The CRN model consisting of a series of perfectly stirred reactors (PSRs) to model CO and NOx is constructed in Cantera. Surrogate models are developed using NIPCE-PCM approach and compared with the results of CRN model. The surrogate models are then used to perform global sensitivity and reliability analyses. The results show that the surrogate models substantially reduce the required computational costs by 2 to 3 orders of magnitude in comparison with the SBM to calculate sensitivity indices, importance factors and perform reliability analysis. Moreover, the results obtained by the NIPCE-PCM approach are more accurate in comparison with the SBM. Therefore, the developed UQ-enabled emissions prediction tool based on CRN and NIPCE-PCM approaches can be used for practical combustion systems as a reliable and computationally efficient framework to conduct probabilistic modeling of emissions.
Many sources of uncertainty exist when emissions are modeled for a gas turbine combustion system. They originate from uncertain inputs, boundary conditions, calibration, or lack of sufficient fidelity in a model. In this paper, a nonintrusive polynomial chaos expansion (NIPCE) method is coupled with a chemical reactor network (CRN) model using Python to quantify uncertainties of NOx emission in a premixed burner. The first objective of uncertainty quantification (UQ) in this study is development of a global sensitivity analysis method based on the NIPCE method to capture aleatory uncertainty on NOx emission due to variation of operating conditions. The second objective is uncertainty analysis (UA) of NOx emission due to uncertain Arrhenius parameters in a chemical kinetic mechanism to study epistemic uncertainty in emission modeling. A two-reactor CRN consisting of a perfectly stirred reactor (PSR) and a plug flow reactor (PFR) is constructed in this study using Cantera to model NOx emission in a benchmark premixed burner under gas turbine operating conditions. The results of uncertainty and sensitivity analysis (SA) using NIPCE based on point collocation method (PCM) are then compared with the results of advanced Monte Carlo simulation (MCS). A set of surrogate models is also developed based on the NIPCE approach and compared with the forward model in Cantera to predict NOx emissions. The results show the capability of NIPCE approach for UQ using a limited number of evaluations to develop a UQ-enabled emission prediction tool for gas turbine combustion systems.
There is a need for fast and reliable emissions prediction tools in the design, development and performance analysis of gas turbine combustion systems to predict emissions such as NOx, CO. Hybrid emissions prediction tools are defined as modelling approaches that (1) use computational fluid dynamics (CFD) or component modelling methods to generate flow field information, and (2) integrate them with detailed chemical kinetic modelling of emissions using chemical reactor network (CRN) techniques. This paper presents a review and comparison of hybrid emissions prediction tools and uncertainty quantification (UQ) methods for gas turbine combustion systems. In the first part of this study, CRN solvers are compared on the bases of some selected attributes which facilitate flexibility of network modelling, implementation of large chemical kinetic mechanisms and automatic construction of CRN. The second part of this study deals with UQ, which is becoming an important aspect of the development and use of computational tools in gas turbine combustion chamber design and analysis. Therefore, the use of UQ technique as part of the generalized modelling approach is important to develop a UQ-enabled hybrid emissions prediction tool. UQ techniques are compared on the bases of the number of evaluations and corresponding computational cost to achieve desired accuracy levels and their ability to treat deterministic models for emissions prediction as black boxes that do not require modifications. Recommendations for the development of UQ-enabled emissions prediction tools are made.