Zinc oxide (ZnO) nanostructures were synthesized and their photocatalytic activity was evaluated using methylene blue (MB) as a model pollutant. Ethylenediamine (EDA) was used as a passivating agent to control the morphology and size of the ZnO nanostructures. In the absence of EDA, agglomerated ZnO nanoparticles were obtained. The addition of EDA at varying concentrations considerably influenced the morphological size. The as-prepared samples were extensively characterized using various techniques. The morphology- and size-dependent photocatalytic degradation of MB was studied under visible light irradiation. The maximum degradation efficiency was observed for ZnO nanoflakes; the MB-related absorbance peak completely disappeared after 15 min of irradiation. Furthermore, the effect of various photocatalytic reaction parameters, such as pH (3–12) of the solution, the concentration of the dye (5, 10, 15, and 20 ppm), and the dosage of the photocatalyst (25, 50, 75, and 100 mg L−1), on the photodegradation of MB was investigated to determine the maximum degradation efficiency. The optimum values of solution pH, dye concentration, and photocatalyst dosage were 11, 10 ppm, and 75 mg L−1, respectively.
Ultrafast visible light active CuS/ZnS nanostructured photocatalysts were synthesized by a hydrothermal method. The effect of the CuS concentration on the morphological, structural and optical properties of ZnS nanostructures were investigated. X-ray diffraction analysis indicated the formation of CuS/ZnS phases with good crystallinity. The presence of ZnS on CuS was confirmed by X-ray photoelectron spectroscopy, elemental mapping, scanning electron microscopy and high resolution transmission electron microscopy analyses. CuS/ZnS nanocomposites efficiently decomposed methylene blue (MB) upon irradiation with visible light. The degradation time was 3 times faster than that of bare ZnS and CuS. The scavenger analysis results revealed that photogenerated superoxide (O2−˙) radicals were the main reactive species for the degradation of MB. The maximum degradation efficiency of 95.51% was observed within 5 min for samples of 0.050 M CuS/ZnS composites. The obtained results suggested that the enhanced photocatalytic activity was due to the formation of CuS/ZnS heterojunctions which led to the efficient separation of the photoinduced carriers.