Lignocellulose biomass including wood is an abundant, natural, and renewable material, and is a promising fossil fuel substitute. However, there are still no powerful solvents to extract polysaccharides from biomass. Here we report a tetra-n-butylphosphonium hydroxide–water mixture as a potential solvent for wood dissolution without heating. Upon gentle stirring at room temperature, this solution containing 40 wt% water extracted 37% of polysaccharides after stirring for only 1 hour. This excellent dissolution ability was maintained in a wide range of water content.
Dissolution of several kinds of woods was examined in tetra-n-butylphosphonium hydroxide ([P4,4,4,4]OH) aqueous solution. Since there is a strong correlation between the dissolution degrees and the Klason lignin contents of the wood, lignin degradation and removal were found to be necessary for efficient dissolution of several woods such as cedar. It was found that moderate heating (60 °C) and addition of H2O2 aqueous solution to 50% [P4,4,4,4]OH aqueous solution are quite effective to dissolve wood. Cedar powder (final concentration of 5.0 wt%) was almost completely dissolved in this aqueous solution at 60 °C under mild stirring for 24 h. This efficient wood dissolution was caused by partial degradation of lignin.
Polysaccharides and lignin, extracted from wheat bran with 1-ethyl-3-methylimidazolium methylphosphonate, were directly analysed with high-performance liquid chromatography with the aid of ionic liquid as an eluent (HPILC). Polysaccharides and lignin were clearly detected independently with the use of both a refractive index detector and UV detector. Polysaccharides with low molecular weights were obtained at 25 °C in 2 h with an extraction yield of only 4%. High molecular weight polysaccharides were extracted with a yield of 26% at 120 °C and selective extraction of high MW polysaccharides was succeeded with pretreatment at low temperature. Furthermore, a similar extraction was carried out for wood biomass. Characteristics of pine and oak were observed in the molecular weight distributions of the extracted polysaccharides and lignin. We also analysed the extracts from different parts of Prunus × yedoensis ‘Somei-yoshino’. The average molecular weight of polysaccharides from its leaves was determined to be lower than that of its twigs. The present HPILC method has potential to rapidly and easily analyse molecular weight distributions of components of plants.