Copper mining, the central axis of Chile’s economic development, produces a large number of tailings, which become a potential environmental risk. This study aims to evaluate the mechanical properties resulting from the making of Portland cement mixtures with tailings as aggregates so that they can be eventually used in paving stones for building inactive tailings dams. Tailings coming from two dams at a concentration plant located in Taltal (Chile) were used. Currently, Dam 1 is inactive, while Dam 2 is active. The tailings samples obtained from both dams were granulometrically characterized by sieving. In addition, pH, humidity, Eh, and mineralogical assays (sulfides, oxides, sulfates, carbonates, phosphates, and silicates) were measured. The fines content of the tailings from Dams 1 and 2 with a sieve size of N°200 ASTM were 76.2% and 29.6%, respectively. Therefore, owing to their high percentage of fines, they cannot be as used as concrete aggregates. Aggregates must contain a maximum percentage of fines so that mortars and concrete can meet Chilean standards. In this paper, to comply with a 7% and 15% fines content lower than 0.075 mm, tailings materials were mixed with conventional aggregates containing very little fines. In addition, a reference mixture was made with only tailings aggregates with and without a superplasticizer additive. To measure the mixtures of cement, aggregates, and tailings, bending and compression strength assays were made of the specimens after a 28-day curing, according to the Chilean standard. The results of the study show that the addition of only part of the tailings to the mixture increases bending strength by 26% and compression strength by 180% compared with the reference mortar, with a fines content lower than 0.075 mm in the 7% mixture, thus allowing paving stone manufacture with tailings materials. In addition, it was possible to increase the workability of the reference mixture by using superplasticizers as additives.

For centuries, Chile has been a territory with significant mining activity, resulting in associated social benefits and impacts. One of the main challenges the country faces today is the presence of a great number of mine tailings containing heavy metals, such as Cu, Cr, Ni, Zn, Pb, As, Cd, and Fe, which make up a potential risk for the population. This study is intended to develop a methodology for determining tailings requiring urgent treatment in Chile, based on risks associated with heavy metals. Geochemical data from 530 Chilean tailings were compared to the Dutch norm and the Canadian and Australian soil quality guidelines for residential use. Additionally, criteria about residents and water bodies were used, considering a 2-km area of influence around tailings. To do this, QGIS (Böschacherstrasse 10a CH-8624 Grüt (Gossau ZH), Zurich, Switzerland), a geospatial tool, was used to geolocate each deposit, considering regions, communes, rivers, lakes, and populated areas. To evaluate potential ecological contamination risks, Hakanson’s methodology was used. Results revealed the presence of 12 critical tailings in Chile that require urgent treatment. From the 530 tailings evaluated, 195 are located at less than 2 km from a populated area and 154 at less than 2 km from a water body. In addition, 347 deposits require intervention: 30 on Cu, 30 on Cr, 13 on Zn, 69 on Pb, 138 on As, 1 on Cd, and 5 on Hg.

The aim of this work is to show a methodological proposal for the analysis of soil intervention values in mine tailings in order to determine the intervention requirements in the commune of Andacollo in northern Chile. The purpose of this analysis is to guide the intervention policies of both private and public organizations. The evaluation method is based on the Dutch legislation. The usability of the proposed methods depends on the available geochemical data from soil samples; in particular, we tackle the case when information regarding clay percentage in the soil is not available. We use the concepts of a threshold factor and an adjusted threshold factor to calculate a weighted intervention ranking. In order to illustrate the utility of this methodological proposal, a case study is carried out with the prescribed approach. In particular, this work presents an analysis of the elements of environmental significance related to the mining activity (Hg, Cd, Pb, As, Cu, Ni, Zn, Cr) in the commune of Andacollo, Coquimbo Region, Chile. The analyzed samples are used to determine where the intervention of tailing deposits is necessary and where a solution to these environmental liabilities is required as soon as possible. Out of the 81 samples evaluated, it was found that 18 require a potential intervention, and of these samples, seven of them are associated with abandoned tailings that, in some cases, are located close to the town center itself, one sample is associated with active tailings and the other 10 with inactive tailings.