Floods cause significant damages in urban and rural areas. Bodrum city is of high importance for the tourism of Turkey. It suffers unavoidably from floods. Short duration severe storms incited by impervious surfaces cause immense floods, paralyzing city life as well as the tourism of the country. Engineering studies are hampered by intensive and improper urbanization, expensive expropriation costs and the difficulties in sharing responsibilities among governmental organizations. The flood of 22-23 September 2015 hit the city center of Bodrum, affected many structures and endangered human life. Some city roads were closed, some drainage lines were damaged and tourism was interrupted. The flood of Bodrum on September 22-23, 2015 was investigated on the scale of the affected basins. The causes and consequences of the flood were elucidated by field examinations. The drainage systems of upper, middle and lower basins were evaluated regarding their effects on the impact of the flood. Based on the rainfall records, runoff estimations were obtained using the SCS abstraction methodology. Flood hydrographs were derived by means of dimensionless hydrographs. Obtained results were used for the evaluation of the flood, and for suggesting solutions.
A variety of flood models and commercial flood simulation software are provided in the literature, with different accuracies and precisions changing from coarse to fine, depending on model structure and detailed descriptions of basin and hydrologic properties. These models generally focus on river processes, taking overland processes as inputs of 1D or 2D hydrodynamic or hydrologic river flow models. Due to the discrete structure of overland flow and unknown-dynamic boundary conditions, such classical approaches are not cable of fast and reliable spatio–temporal estimations for overland flows, and require detailed and well-organized spatial data that cannot be immediately obtained during an emergency. A spatially-distributed Geographical Information Systems (GIS) based flood model is developed in this study to simulate overland floods, using cellular automata principles. GIS raster cells are considered hydrologic homogeneous areas throughout which hydrologic properties remain constant. Hydrodynamic flow principles, conservations of mass, momentum and energy are applied at pixel level to simulate floodwaters. The proposed GIS model is capable of directly manipulating spatio–temporal pixel level data (e.g., topography, precipitation, infiltration, surface roughness etc.) for modeling of rainfall-induced overland floods; therefore, it can provide fast, temporal and spatial flood depth estimations as well as maximum flood depths and times of concentration for all pixels throughout a study area. The model is quite simple and easy to apply via easily creatable GIS input layers, and is thus very convenient for preliminary engineering applications that need quick and fast response. Its main advantage is that it does not need a predefined flood boundary and boundary conditions. This advantage is especially valuable for coastal plains where delineation of a basin is generally too difficult. Floodwaters of Cyclone Nargis/Myanmar were simulated to test the model. Sensitivity analyses were applied to evaluate the effects of the model parameters (i.e., surface roughness and infiltration rates) on simulation results. The study shows that the proposed GIS model can be readily applied for the fast and inexpensive modeling of rainfall caused floods in areas where flood boundaries and boundary conditions cannot be clearly identified.
Climatic variability is one of the fundamental aspects of the climate. Our scope of knowledge of this variability is limited by unavailable long-term high-resolution spatial data. Climatic simulations indicate that warmer climate increases extreme precipitations but decreases high-frequency temperature variability. As an important climatologic variable, the precipitation is reported by the IPCC to increase in mid and high altitudes and decrease in subtropical areas. On a regional scale, such a change needs spatio-parametric justification. In this regard, a regionalization approach relying on frequency characteristics and parameters of heavy precipitation may provide better insight into temporal precipitation changes, and thus help us to understand climatic variability and extremes. This study introduces the “index precipitation method”, which aims to define hydrologic homogeneous regions throughout which the frequency distribution of monthly maximum hourly precipitations remains the same and, therefore, investigate whether there are significant temporal precipitation changes in these regions. Homogenous regions are defined based on L-moment ratios of frequency distributions via cluster analysis and considering the spatial contiguity of gauging sites via GIS. Regarding the main hydrologic characteristics of heavy precipitation, 12 indices are defined in order to investigate the existence of regional trends by means of t- and Mann–Kendall tests for determined homogenous regions with similar frequency behaviors. The case study of Japan, using hourly precipitation data on 150 gauges for 1991–2010, shows that trends that statistically exist for single-site observations should be regionally proved. Trends of heavy precipitation have region-specific properties across Japan. Homogenous regions beneficially define statistically significant trends for heavy precipitation.