Cable-driven parallel mechanism has been widely studied due to its advantages of fast response and large workspace. The structural uncertainties in the system often introduce internal disturbance and unavoidably influence its motion precision. Generally, to reduce the influence, robust control is adopted and the boundary of the disturbance is regarded as a fixed value given by rough estimation. This method often causes large vibration of the motion component, which certainly compromises the dynamic performance of the system. Therefore, to solve this problem, a variable boundary analytical scheme based on the decoupling of control law and internal disturbance is proposed in this article. Specifically, sufficient condition for the solvability of disturbance boundary is proved by the boundedness of the structural matrix error. Then, the disturbance boundary is modeled analytically, so that its particular value can be determined with respect to the system status. Following that, a robust adaptive control algorithm based on the variable boundary of disturbance is developed. It is verified that the tracking error is globally uniformly bounded. The experimental results show that the proposed control method can effectively reduce the tracking errors and attenuate the tension chattering compared with the conventional robust adaptive control scheme with a roughly estimated boundary.
In a traditional lumped-parameter thermal network, no distinction is made between the heat and non-heat sources, resulting in both larger heat flux and temperature drop in the uniform heat source. In this paper, an improved lumped-parameter thermal network is proposed to deal with such problems. The innovative aspect of this proposed method is that it considers the influence of heat flux change in the heat source, and then gives a half-resistance theory for the heat source to achieve the temperature drop balance. In addition, the coupling relationship between the boundary temperature and loading position of the heat generator is also added in the lumped-parameter thermal network, so as to amend the loading position and nodes’ temperature through iterations. This approach breaks the limitation of the traditional lumped-parameter thermal network: that the heat generator can only be loaded at the midpoint, which is critical to determining the maximum temperature in asymmetric heat dissipation. By adjusting the location of heat generator and thermal resistances of each branch, the accuracy of temperature prediction is further improved. A simulation and an experiment on a U-core motor show that the improved lumped-parameter thermal network not only achieves higher accuracy than the traditional one, but also determines the loading position of the heat generator well.
Due to their large working space and fast response, cable driven systems have been widely applied in manufacturing, robotics and motion simulators, etc. However, the cable is flexible and tends to resonate at high frequencies, which raises challenges for the motion control of the cable driven system. To solve this problem, this paper proposes a singular-perturbation-based adaptive control method with -modification. Taking advantage of the multi-time scale characteristics, the flexible system is approximately decomposed into two subsystems, and then the damping compensation is designed in the boundary layer subsystem to enhance the tension stability. In addition, estimated parameters drift may occur for the reduced-order system. Thus, the -modification is proposed to ensure that the tracking and estimation errors converge to a bounded residual set. The Lyapunov stability theorem proves that the closed-loop system is stable and errors are ultimately uniformly bounded. A research prototype of a twin-motor cable driven system is developed, and experimental investigation is conducted on it. The experimental results show that the proposed control method can effectively suppress cable resonance at high frequencies. Compared with the conventional adaptive control method, it can significantly increase the system bandwidth.