Recently, owing to their excellent flexibility and adaptability, skin-like pressure and strain sensors integrated with the human body have the potential for great prospects in healthcare. This review mainly focuses on the representative advances of the flexible pressure and strain sensors for health monitoring in recent years. The review consists of five sections. Firstly, we give a brief introduction of flexible skin-like sensors and their primary demands, and we comprehensively outline the two categories of design strategies for flexible sensors. Secondly, combining the typical sensor structures and their applications in human body monitoring, we summarize the recent development of flexible pressure sensors based on perceptual mechanism, the sensing component, elastic substrate, sensitivity and detection range. Thirdly, the main structure principles and performance characteristic parameters of noteworthy flexible strain sensors are summed up, namely the sensing mechanism, sensitive element, substrate, gauge factor, stretchability, and representative applications for human monitoring. Furthermore, the representations of flexible sensors with the favorable biocompatibility and self-driven properties are introduced. Finally, in conclusion, besides continuously researching how to enhance the flexibility and sensitivity of flexible sensors, their biocompatibility, versatility and durability should also be given sufficient attention, especially for implantable bioelectronics. In addition, the discussion emphasizes the challenges and opportunities of the above highlighted characteristics of novel flexible skin-like sensors.

The two-dimensional (2D) transition metal dichalcogenides (TMDs) are promising flexible electronic materials for strategic flexible information devices. Large-area and high-quality patterned materials were usually required by flexible electronics due to the limitation from the process of manufacturing and integration. However, the synthesis of large-area patterned 2D TMDs with high quality is difficult. Here, an efficient and powerful pulsed laser has been developed to synthesize wafer-scale MoS₂. The flexible strain sensor was fabricated using MoS₂ and showed high performance of low detection limit (0.09%), high gauge factor (1,118), and high stability (1,000 cycles). Besides, we demonstrated its applications in real-time monitoring of health-related physiological signals such as radial artery pressure, respiratory rate, and vocal cord vibration. Our findings suggest that the laser-assisted method is effective and capable of synthesizing wafer-scale 2D TMDs, which opens new opportunities for the next flexible electronic devices and wearable health monitoring.

Friction control is a vital technology for reaching sustainable development goals, and surface texturing is one of the most effective and efficient techniques for friction reduction. This study investigated the performance of a micro-dimpled texture under varying texture densities and experimental conditions. Reciprocating sliding tests were performed to evaluate the effects of the micro-dimpled texture on friction reduction under different normal loads and lubrication conditions. The results suggested that a micro-dimpled texture could reduce the coefficient of friction (CoF) under dry and lubricated conditions, and high dimple density results in a lower CoF. The dominant mechanism of the micro-dimpled texture’s effect on friction reduction was discussed, and surface observation and simulation suggested that a micro-dimpled texture could reduce the contact area at the friction interface, thereby reducing CoF.

Controlling friction and wear are essential for reducing energy loss and lengthening the life span of friction pairs in sliding contacts. Surface texturing is an effective and efficient way to reduce friction and wear, especially under lubricated conditions. Dimple texture on friction pair surfaces has been verified to enhance the lubrication condition and shift the lubrication regime by generating additional hydrodynamic pressure. However, the geometric features and distribution of the microstructures considerably influence the production of additional pressure. Choosing and designing dimple texture with suitable geometric features is necessary and important for texturing applications. In this study, computational fluid dynamics (CFD) are used to investigate the effect of the geometric features of dimple textures on pressure build-up. The influence of dimple shapes, dimple depths, minimum film thickness, dimple densities, and dimple surface angles are presented and discussed. Notably, the influence of the dimple surface angle is introduced and presented.