To facilitate the recycling and reuse of cigarette filters and oil/water separation, a superhydrophobic cigarette filter was made by coating with dodecanethiol-modified polypyrrole (Ppy) particles by a dip-coating method. SEM, FTIR, and XPS were used to analyze the surface morphology and chemical compositions. The as-prepared superhydrophobic cigarette filter can realize wettability alteration via changing the ammonium persulfate (APS) concentration from 0.15 mol/L to 3 mol/L, and the contact angle increased from 0° on the original cigarette filter to 155° with a sliding angle of 5°. The superhydrophobic cigarette filter could effectively separate various oils and organic solvents. The separation efficiency was 98.8% and the separation stability was good. Furthermore, the as-prepared superhydrophobic cigarette filter had a large oil absorption range and could absorb different oils and organic solvents, including petroleum ether, engine oil, vegetable oil, n-hexane, and chloroform, with maximum absorption capacities ranging from 9.4 g/g to 22.7 g/g. According to the above results, we believe that the as-prepared superhydrophobic cigarette filter should have great potential in the recovery of solid waste and high-efficiency oil/water separation.
Ice accumulation presents a significant challenge for various residential activities and industrial facilities. Most current de-icing methods are time-consuming and costly. Photothermal superhydrophobic surfaces have garnered significant attention in the field of anti-icing and de-icing due to their environmentally friendly and energy-saving characteristics. However, obtaining photothermal superhydrophobic surfaces with both reliable icing delay and effective photothermal de-icing capabilities at ultra-low temperatures (<−30 °C) remains significantly challenging. In this study, we prepared a multilayer flexible photothermal TiN-based superhydrophobic surface (ML-SHS), comprising an FAS@SiO2/TiN superhydrophobic layer and a PDMS/Triton X-100 flexible supporting layer. The optimal ML-SHS exhibits excellent superhydrophobicity (a water contact angle of 162.7° and a sliding angle of 2°) and an average light absorption of 95.6%, and generates a substantial surface temperature increase of 80.2 °C under 1 sun illumination. Droplets easily roll off the ML-SHS at −10 °C without solar illumination and at −35 °C under 1 sun illumination, demonstrating excellent passive anti-icing capability. Due to its excellent photothermal conversion and thermal constraint capabilities, the accumulated ice layer on the ML-SHS rapidly melts within 450 seconds at −20 °C under 1 sun illumination. The ML-SHS also possesses self-cleaning properties, mechanical durability, and chemical stability, ensuring the usability of the superhydrophobic surface under harsh conditions. Our study may offer a novel approach for the design and fabrication of photothermal superhydrophobic surfaces, facilitating efficient passive anti-icing and active de-icing in practical applications.
13 September 2023 in Journal of Materials Chemistry C
Flexible strain sensors have important applications in wearable electronics, human motion monitoring, and healthcare. Soft, compatible, and conductive hydrogels are considered promising stretchable materials. However, hydrogel-based sensors still face challenges with the combined advantages of good electrical conductivity, low strain limit (less than 5%), mechanical strength, and anti-interference. As a result, most hydrogel-based sensors cannot stably recognize human tiny movements (such as pulse, throat, etc.). Herein, we constructed a double network (DN) hydrogel consisting of SA–Zn and P(AA-AM) to boost the mechanical performance and prepare the graphene oxide (GO) modified by polydopamine@Ag nanoparticles (PDA@Ag) via a one-step redox reaction method to enhance the sensitivity. The prepared GO/PDA@Ag/SA–Zn hydrogel strain sensor has an ultralow strain detection limit (0.1%), good gauge factor (GF = 8.29), and high stretchability (600%). It is proven that the hydrogel strain sensor can work as a wearable device to continuously monitor full-scale human motions. Furthermore, it works as a speech interface to detect subtle throat speech movements and which is further classified by a transfer learning algorithm based on the Resnet50 neural network, demonstrating that our sensor can recognize ten kinds of common words expressing physical demands with a precise accuracy of 100%. It provides the possibility to help patients or weak people with voice disorders in the hospital express their requirements. This work provides new insights into fabricating flexible hydrogel strain sensors with promising applications in next-generation intelligent wearable devices for healthcare, medical treatments, diagnosis, therapy, and rehabilitation.