This paper presents frequency domain solution algorithms of the one-dimensional transient heat transfer equation that describes temperature variations in arch dam cross sections. Algorithms are developed to compute the temperature T(x,t) , spatial distribution, and time evolution for the “direct” problem, where the temperature variations are specified at the upstream and downstream faces, and for the “inverse” problem, where temperatures have been measured at thermometers located inside instrumented dam sections. The resulting nonlinear temperature field is decomposed in an effective average temperature, Tm (t) , and a linear temperature difference, Tg (x,t) , from which the dam thermal displacement response can be deducted. The proposed frequency domain solution procedures are able to reproduce an arbitrary transient heat response by appending trailing temperatures at the end of thermal signals, thus transforming a periodic heat transfer problem in a transient one. The frequency domain solution procedure...
1 December 2012 in Journal of Structural Engineering
This paper presents shake table test results on two identical 1:0.429 scaled, 8-story moderately ductile RC shear wall specimens under the expected high-frequency ground motion in eastern North America. The walls were designed and detailed according to the seismic provisions of the NBCC 2005 and CSA-A23.3-04 standards. The objectives were to validate and understand the inelastic responses and interaction of shear and flexure and axial loads in the plastic hinge zones of the walls taking into consideration the higher-mode effects. One specimen was tested under incremental ground motion intensities ranging from 40 to 120% of the design level. The intensity range was increased from 100 to 200% for the second specimen. The response of the walls was significantly affected by the second mode, causing an inelastic flexural response to develop at the base as well as at the sixth level. Dynamic amplification of the base shear forces was also observed in both walls. In the second wall, which was tested in t...
1 January 2005 in Journal of Structural Engineering
Water pressure variations along concrete cracks with moving walls are investigated experimentally and theoretically. Displacement control tests were conducted to measure water pressure on 0.4 m long concrete cracks during harmonic motion of crack walls. The effects of key parameters including frequency of excitation, minimum and amplitude of crack mouth opening displacement, and initial static uplift pressure on the magnitude of developed pressure is also studied. The experimental results show the possibility of cavitation in a new or existing crack opening mode. A theoretical dynamic water–crack interaction model is developed, considering the effect of cavitation phenomenon, to compute water pressure in cracks as a function of crack wall motion history, crack length, crack roughness, and crack mouth pressure. The validity of the developed method is verified by the test results and it is used to study the pressure variations in longer cracks likely to develop in the concrete gravity dams. The computed upl...
12 December 2012 in Journal of Earthquake Engineering
This article presents the numerical modeling of large-scale shake table tests of slender 8-story reinforced concrete (RC) shear wall specimens. Nonlinear time history analyses are carried out using reinforced concrete fiber elements (OpenSees, OS) and the finite element (FE) methods (VecTor2, VT2). The effects of the modeling assumptions are investigated, including: (a) the tension stiffening effect, (b) damping, (c) smeared vs. lumped reinforcement, and (d) the use of effective shear stiffness in OS. Good agreements are obtained between the numerical and experimental results. Using the proposed numerical modeling strategy, it is possible to investigate the nonlinear dynamic responses of slender RC wall structures with confidence.
1 January 2008 in Journal of Engineering Mechanics
This paper develops a methodology to perform seismic response analyses of concrete gravity dams considering aftershocks, and reduced drainage efficiency due to disruption of the drainage system. A database of earthquake records has been assembled to characterize main shocks and aftershocks. A drain finite difference hydraulic model considering laminar or turbulent two-dimensional flow in connecting cracks, geometrical distortions due to joint dilatancy while sliding, and misaligned drain segments is developed and validated. Coupled-hydromechanical analyses on the seismic response of a drained 90 m gravity dam are used to show the importance of cumulative displacements on the increase in uplift pressures, drain flow, and reduced sliding safety factors. Aftershock response is especially sensitive to the drainage system dimensions and model parameters, such as the foundation stiffness, and the number of potentially sliding joints. The proposed methodology forms the basis to develop displacement based perform...
1 June 2009 in Journal of Performance of Constructed Facilities
Seasonal temperature displacements are an important component of the total displacements recorded by pendulum measurements at gravity dams located in northern regions. A hybrid dam displacement model is presented in this paper to interpret these displacements and extrapolate the response for an extreme thermal event not yet experienced by the dam. The hybrid model uses a simplified deterministic structural dam representation with beam elements in complement to a hydrostatic seasonal time (HST) statistical displacement model. Comparisons are first established between 1D heat transfer analyses of typical gravity dam sections, and 2D finite-element (FE) analyses. Thermomechanical displacements are compared to show the validity of the proposed simplified deterministic beam model for typical dams. A case study of an actual 40 m gravity dam located in Quebec, Canada is then presented. It is shown that the deterministic model can be calibrated using the pendulum displacements and the HST model. The calibrated de...