Forests play an important role in biodiversity conservation, being one of the main providers of ecosystem services, according to the Economics of Ecosystems and Biodiversity. The functions and ecosystem services provided by forests are various concerning the natural capital and the socio-economic systems. Past decades of remote-sensing advances make it possible to address a large set of variables, including both biophysical parameters and ecological indicators, that characterize forest ecosystems and their capacity to supply services. This research aims to identify and implement existing methods that can be used for evaluating ecosystem services by employing airborne and terrestrial stationary laser scanning on plots from the Southern Carpathian mountains. Moreover, this paper discusses the adaptation of field-based approaches for evaluating ecological indicators to automated processing techniques based on airborne and terrestrial stationary laser scanning (ALS and TLS). Forest ecosystem functions, such as provisioning, regulation, and support, and the overall forest condition were assessed through the measurement and analysis of stand-based biomass characteristics (e.g., trees’ heights, wood volume), horizontal structure indices (e.g., canopy cover), and recruitment-mortality processes as well as overall health status assessment (e.g., dead trees identification, deadwood volume). The paper, through the implementation of the above-mentioned analyses, facilitates the development of a complex multi-source monitoring approach as a potential solution for assessing ecosystem services provided by the forest, as well as a basis for further monetization approaches.

Research Highlights: Management of the risks forests are exposed to is based on the dynamics of the composition and structure of the stands and the forest. Background and Objectives: This study aimed to document the dynamics of the composition and structure of stands and forest in the Romanian Carpathians over the last five decades, as well as estimate the forecast composition of the forest in the near future (i.e., 2070). Materials and Methods: The obtained results were based on long-term monitoring and analysis of the species and structures in the stands in long-term research areas (over five decades). We performed an inventory of all the trees (on 7.5 ha) in order to characterize the stand structure in sampling plots of 0.25–1.0 ha, located in representative stands of five forest formations. Bitterlich sampling was performed in order to determine the composition of each stand (on 2930.4 ha). The future composition was established in accordance with the characteristics of the natural forest types and was based on seedling dynamics and forest management plans. Results: In mixed beech–coniferous stands, over the last five decades, the area of beech has increased by 38%, while conifers have decreased proportionally—fir by 31% and spruce by 5%. The seedling area increased from 23% to 65%, with fir contributing 22% to the composition and beech 42%. Stand density decreased by an average of 14%, with the current increment decreasing by 3.8%. The slenderness index for fir decreased from 73 to 61. In the near future, there will be an increase in the proportion of fir, from 15 to 33%, and a reduction in beech, from 49 to 45%. The proportion of spruce will be reduced from 17 to 12%. Conclusions: Based on the forest dynamics, management adaptation strategies need to be developed to improve the stability of the forest ecosystems.

Research Highlights: The present study case investigates the differences occurring when tree’s biophysical parameters are extracted through single and multiple scans. Scan sessions covered mountainous and hill regions of the Carpathian forests. Background and Objectives: We focused on analyzing stems, as a function of diameter at breast height (DBH) and the total height (H), at sample plot level for natural forests, with the purpose of assessing the potential for transitioning available methodology to field work in Romania. Materials and Methods: We performed single and multiple scans using a FARO Focus 3D X130 phase shift terrestrial laser scanner at 122 kpts and 0.3:0.15 mm noise compression ratio, resulting in an average point density of 6pts at 10m. The point cloud we obtained underpinned the DBH and heights analysis. In order to reach values similar to those measured in the field, we used both the original and the segmented point clouds, postprocessed in subsamples of different radii. Results: Pearson’s correlation coefficient above 0.8 for diameters showed high correlation with the field measurements. Diameter averages displayed differences within tolerances (0.02 m) for 10 out of 12 plots. Height analysis led to poorer results. For both acquisition methods, the values of the correlation coefficient peaked at 0.6. The initial hypothesis that trees positioned at a distance equivalent to their height can be measured more precise, was not valid; no increase in correlation strength was visible for either heights or diameters as the distance from scanner varied (r = 0.52). Conclusions: With regard to tree biophysical parameters extraction, the acquisition method has no major influence upon visible trees. We emphasize the term “visible”, as an increase in the number of acquisitions led to an increased number of detected trees (16% in old stands and 29% in young stands).

Research highlights: In this study, the possibility of developing predictive models for both individual trees and forest stands, based on information derived from digital surface models (DSMs), was evaluated. Background and objectives: Unmanned aerial systems (UASs) make it possible to obtain digital images with increased spectral and spatial resolution at a lower cost. Based on the variables extracted by means of the digital representation of surfaces, we aimed at generating mathematical models that would allow the prediction of the main biometric features of both individual trees and forest stands. Materials and methods: Forest stands are characterized by various structures. As such, measurements may address upper-level trees, but most often are oriented towards those belonging to the mean tree category, randomly selected from those identifiable from digital models. In the case of grouped trees, it is the best practice to measure the projected area of the entire canopy. Tree and stand volumes can be determined using models based on features measured in UAS-derived digital models. For the current study, 170-year-old mixed sessile oak stands were examined. Results: Mathematical models were developed based on variables (i.e., crown diameter and tree height) extracted from digital models. In this way, we obtained results characterized by root mean square error (RMSE) values of 18.37% for crown diameter, 10.95% for tree height, and 8.70% for volume. The simplified process allowed for the estimates of the stand volume using crown diameter or diameter at breast height, producing results with RMSE values of 9%. Conclusions: The accuracy of the evaluation of the main biometric features depends on the structural complexity of the studied plots, and on the quality of the DSM. In turn, this leads to the necessity to parametrize the used models in such a manner that can explain the variation induced by the stand structure.

Outdoor sports are increasing in popularity and expanding into areas of outstanding biodiversity and rural character in the Carpathian Mountains of Romania. In this study, we address the consideration given to sustainability in the guidelines and regulations developed by trail running event organizers to better understand their awareness and care for biodiversity and local communities. First, we assessed the regulations prescribed by Romanian race organizers against the recommendations developed by 2 key international trail running associations and against a comprehensive set of indicators designed for the certification of trail running events. Second, we employed text mining to analyze event descriptions and regulations. Third, we delved into track data for each event, scrutinizing the geographical proximity to protected areas. We found sustainability was poorly addressed by event organizers. We propose a set of principles for implementing more sustainable races in regions with exceptional biodiversity, wilderness areas, and rural character.