Fluid–fluid displacement in porous media has been viewed through the lens of Lenormand's phase diagram since the late 1980s. This diagram suggests that the character of the flow is controlled by two dimensionless parameters: the capillary number and the viscosity ratio. It is by now well known, however, that the wettability of the system plays a key role in determining the pore-scale displacement mechanisms and macroscopic invasion patterns. Here, we endow Lenormand's diagram with the impact of wettability using dynamic and quasi-static pore-network models. By using the fractal dimension and the ratio of characteristic viscous and capillary pressures we delineate the five principal displacement regimes within the extended phase diagram: stable displacement, viscous fingering, invasion percolation, cooperative pore filling and corner flow. We discuss the results in the context of pattern formation, displacement-front dynamics, pore-scale disorder and displacement efficiency.
Motivated by the process of $\text{CO}_{2}$ convective mixing in porous media, here we study the formation of rock-dissolution patterns that arise from geochemical reactions during Rayleigh–Bénard–Darcy convection. Under the assumption of instantaneous chemical equilibrium, we adopt a formulation of the local reaction rate as a function of scalar dissipation rate, a measure that depends solely on flow and transport, and chemical speciation, which is a measure that depends only on the equilibrium thermodynamics of the chemical system. We use high-resolution simulations to examine the interplay between the density-driven hydrodynamic instability and the rock dissolution reactions, and analyse the impact of geochemical reactions on the macroscopic mass exchange rate. We find that dissolution of carbonate rock initiates in regions of locally high mixing, but that the geochemical reaction shuts down significantly earlier than shutdown of convective mixing. This early shutdown feature reflects the important role that chemical speciation plays in this hydrodynamics–reaction coupled process. Finally, we extend our analysis to three dimensions and explore the morphology of dissolution patterns in three dimensions.
13 December 2013 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Geological carbon dioxide (CO 2 ) sequestration entails capturing and injecting CO 2 into deep saline aquifers for long-term storage. The injected CO 2 partially dissolves in groundwater to form a mixture that is denser than the initial groundwater. The local increase in density triggers a gravitational instability at the boundary layer that further develops into columnar plumes of CO 2 -rich brine, a process that greatly accelerates solubility trapping of the CO 2 . Here, we investigate the pattern-formation aspects of convective mixing during geological CO 2 sequestration by means of high-resolution three-dimensional simulation. We find that the CO 2 concentration field self-organizes as a cellular network structure in the diffusive boundary layer at the top boundary. By studying the statistics of the cellular network, we identify various regimes of finger coarsening over time, the existence of a non-equilibrium stationary state, and a universal scaling of three-dimensional convective mixing.
Rocks are heterogeneous multiscale porous media: two rock samples with identical bulk properties can vary widely in microstructure. The advent of digital rock technology and modern 3‐D printing provides new opportunities to replicate rocks. However, the inherent trade‐off between imaging resolution and sample size limits the scales over which microstructure and macrostructure can be identified and related to each other. Here, we develop a multiscale digital rock construction strategy by combining X‐ray computed microtomography and focused‐ion beam (FIB)‐scanning electron microscope (SEM) images, and we apply the technique to a tight sandstone. The computed tomography (CT) scanning images characterize macroscale pore structures, while the FIB‐SEM images capture microscale pore textures. The FIB‐SEM images are then coupled to CT images via a template‐matching algorithm and superposition. Bulk properties, including porosity and pore and throat size distribution, can be recovered with this approach. Permeability prediction with a pore network model for the largest connected pore network are 3 orders and 1 order of magnitude greater than the bulk rock measured value using the CT‐only and the SEM‐CT coupled images, respectively.
Viscous fingering—the fluid-mechanical instability that takes place when a low-viscosity fluid displaces a high-viscosity fluid—has traditionally been studied under either fully miscible or fully immiscible fluid systems. Here we study the impact of partial miscibility (a common occurrence in practice) on the fingering dynamics. Through a careful design of the thermodynamic free energy of a binary mixture, we develop a phase-field model of fluid-fluid displacements in a Hele-Shaw cell for the general case in which the two fluids have limited (but nonzero) solubility into one another. We show, by means of high-resolution numerical simulations, that partial miscibility exerts a powerful control on the degree of fingering: fluid dissolution hinders fingering while fluid exsolution enhances fingering. We also show that, as a result of the interplay between compositional exchange and the hydrodynamic pattern-forming process, stronger fingering promotes the system to approach thermodynamic equilibrium more quickly.
30 November 2020 in Proceedings of the National Academy of Sciences
Widespread seafloor methane venting has been reported in many regions of the world oceans in the past decade. Identifying and quantifying where and how much methane is being released into the ocean remains a major challenge and a critical gap in assessing the global carbon budget and predicting future climate [C. Ruppel, J. D. Kessler. Rev. Geophys. 55, 126–168 (2017)]. Methane hydrate () is an ice-like solid that forms from methane–water mixture under elevated-pressure and low-temperature conditions typical of the deep marine settings (>600-m depth), often referred to as the hydrate stability zone (HSZ). Wide-ranging field evidence indicates that methane seepage often coexists with hydrate-bearing sediments within the HSZ, suggesting that hydrate formation may play an important role during the gas-migration process. At a depth that is too shallow for hydrate formation, existing theories suggest that gas migration occurs via capillary invasion and/or initiation and propagation of fractures (Fig. 1). Within the HSZ, however, a theoretical mechanism that addresses the way in which hydrate formation participates in the gas-percolation process is missing. Here, we study, experimentally and computationally, the mechanics of gas percolation under hydrate-forming conditions. We uncover a phenomenon—crustal fingering—and demonstrate how it may control methane-gas migration in ocean sediments within the HSZ. Significance Widespread seafloor methane venting has been reported in many regions of the world oceans, challenging our current estimate of global carbon budget. Yet, we still do not fully understand the fundamental mechanisms by which methane gas migrates through the deep marine sediments, feeding these vents. A key challenge is the formation of methane hydrate, an ice-like solid that forms from a methane–water mixture under pressure and temperature conditions typical of deep marine settings. Here, we study the mechanics of gas percolation under hydrate-forming conditions using experiments and computational modeling. We uncover a phenomenon, which we call crustal fingering, that helps explain how, counterintuitively, hydrate formation may facilitate instead of prevent methane gas migration through deep ocean sediments.