This research paper studies and highlights the features of the most popular finite control set model predictive control (FCS-MPC) strategies available in the state of the art, which are the optimal switching vector (OSV-MPC), modulated model predictive control (M2PC), and optimal switching sequence (OSS-MPC) methods. Thus, these strategies are studied experimentally by analyzing the transient and steady state performance using a grid tie conventional three-phase two-level voltage source inverter (VSI) with inductive output filter in a Typhoon HIL real-time simulator (RTS) with a Texas Instruments F28379D digital signal processor (DSP). Hence, quantitative indicators, such as the maximum tracking error, the mean absolute error, the settling time, the total harmonic distortion, the switching frequency spectrum, the switching pattern, and the computational burden are compared with the aim to deduce the best strategy for each criteria.

The growing number of renewable energy plants connected to the power system through static converters have been pushing the development of new strategies to ensure transient stability of these systems. The virtual synchronous generator (VSG) emerged as a way to contribute to the system stabilization by emulating the behavior of traditional synchronous machines in the power converters operation. This paper proposes a modification in the VSG implementation to improve its contribution to the power system transient stability. The proposal is based on the virtualization of the resistive superconducting fault current limiters’ (SFCL) behavior through an adaptive control that performs the VSG armature resistance change in short-circuit situations. A theoretical analysis of the problem is done based on the equal-area criterion, simulation results are obtained using PSCAD, and experimental results are obtained in a Hardware-In-the-Loop (HIL) test bench to corroborate the proposal. Results show an increase in the system transient stability margin, with an increase in the fault critical clearing time (CCT) for all virtual resistance values added by the adaptive control to the VSG operation during the short-circuit.