Broadband laser light sources in the mid-infrared region attract enormous interest due to the plethora of applications they are enabling, including multispecies trace gas detection, free-space communications, and infrared countermeasures. Key to the progress in supercontinuum generation has been the wide availability of fiber-based near-infrared and bulk-optic mid-infrared pump sources and suitably engineered nonlinear media capable of supporting high-brightness supercontinua. A large proportion of the system complexity relates to the pump source itself with free-space systems based on parametric conversion being the most common for the generation of long-wavelength supercontinua. In an effort to realize all fiber and all mid-infrared supercontinuum sources, we combine a recently developed 2.9 µm ultrafast fiber laser based on holmium with an environmentally stable, polymer-protected all-chalcogenide tapered fiber. By launching 230 fs, 4.2 kW peak power pulses into the tapered fiber, we demonstrate a spectrum spanning from 1.8 to 9.5 µm at the points with an average power of more than 30 mW. This octave-spanning supercontinuum is a crucial step toward robust mid-infrared broadband sources required for future field-deployable instruments.
We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the first involves fabricating large multimode waveguides, while the second step consists of a thermal post-annealing process, which erases the outer ring of the refractive index profile, enabling single mode operation in the C-band. By using this procedure we report waveguides with sharp bends (down to 16.6 mm radius) and high (80%) normalized throughputs. This procedure was used to fabricate an efficient 3D, photonic device known as a “pupil-remapper” with negligible bend losses for the first time. The process will also allow for complex chips, based on 10's - 100's of waveguides to be realized in a compact foot print with short fabrication times.
The recent demonstrations of ultrafast mid-infrared fiber lasers emitting sub-picosecond pulses at 2.8 μm have created an exciting potential for a range of applications including mid-infrared frequency combs and materials processing. So far, this new class of laser has been based on the transition in erbium-doped fluoride fibers, which lies directly in a region of high water vapor absorption. This absorption has limited the achievable bandwidth, pulse duration, and peak power and poses a serious problem for transmission in free space. In this Letter, we present an ultrafast mid-infrared fiber laser that overcomes these limitations by using holmium as the gain medium. Holmium allows the central emission wavelength to shift to nearly 2.9 μm and avoid the strong water vapor lines. This laser, which represents the longest wavelength mode-locked fiber laser, emits 7.6 nJ pulses at 180 fs duration, with a record peak power of 37 kW. At this power level, the laser surpasses many commercial free-space OPA systems and becomes attractive for laser surgery of human tissue, for industrial materials modification, and for driving broadband coherent supercontinuum in the mid-infrared.
We report a pumped, doped ZBLAN glass buried waveguide laser that produces at , with a 50% internal slope efficiency and an of 1.7. The waveguide cladding is defined by two overlapping rings created by femtosecond direct-writing of the glass, which results in the formation of a tubular depressed- index-cladding structure, and the laser resonator is defined by external dielectric mirrors. This is, to the best of our knowledge, the most efficient laser created in a glass host via femtosecond waveguide writing.
Rare-earth-doped fiber lasers are emerging as promising high-power mid-infrared sources for the 2.6–3.0 μm and 3.3–3.8 μm regions based on erbium and holmium ions. The intermediate wavelength range, however, remains vastly underserved, despite prospects for important manufacturing and defense applications. Here, we demonstrate the potential of dysprosium-doped fiber to solve this problem, with a simple in-band pumped grating-stabilized linear cavity generating up to 1.06 W at 3.15 μm. A slope efficiency of 73% with respect to launched power (77% relative to absorbed power) is achieved—the highest value for any mid-infrared fiber laser to date, to the best of our knowledge. Opportunities for further power and efficiency scaling are also discussed.
Fiber Bragg gratings inscribed with a femtosecond laser using the point-by-point (PbP) technique have polarization dependent grating strength (PDGS) and exhibit birefringence. In this paper we quantify the dependence of these two properties on the ellipticity, position in the core and size of the micro-voids at the center of each refractive index modulation. We demonstrate that the effective modal index for type II gratings written with a femtosecond laser using the PbP method must be lower than that of the pristine fiber, and for the first time associate an axis with a polarization such that the long axis of the elliptically-shaped index modulations corresponds to the slow axis of the gratings. We exploit the PDGS of two gratings used as frequency-selective feedback elements as well as appropriate coiling, to realize a linearly-polarized fiber laser with a low birefringence fiber cavity. We show that the polarization-dependent grating strength is a function of the writing pulse energy and that only gratings optimized for this property will linearly polarize the fiber laser. The fiber lasers have high extinction ratios (>30 dB) for fiber lengths of up to 10 m and very stable polarized output powers (<0.5% amplitude fluctuations) in the range of 20–65 mW at 1540 nm. This method of polarization discrimination allows the realization of highly robust and simplified linearly polarized fiber lasers.