In this study, we investigate the bulk effect of photoresponsive gate insulators on the photoresponse of organic phototransistors (OPTs), using OPTs with poly(4-vinylphenol) layers of two different thicknesses. For the photoresponse, the interplay between the charge accumulation (capacitance) and light-absorbance capabilities of a photoresponsive gate insulator was investigated. Although an OPT with a thicker gate insulator exhibits a lower capacitance and hence a lower accumulation capability of photogenerating charges, a thicker poly(4-vinylphenol) layer, in contrast to a thinner one, absorbs more photons to generate more electron–hole pairs, resulting in a higher photoresponse of the device. That is, in these two cases, the degree of light absorption by the photoresponsive gate insulators dominantly governed the photoresponse of the device. Our physical description of the bulk effect of photoresponsive insulators on the performance of OPTs will provide a useful guideline for designing and constructing high-performance organic-based photosensing devices and systems.
We demonstrate an array of solid-state dye-sensitized solar cells (SS-DSSCs) for a high-voltage power source based on micropatterned titanium dioxide nanoparticles (TNPs) as photoanodes connected in series. The underlying concept of patterning the TNP of a few micrometers thick lies on the combination of the lift-off process of transfer-printed patterns of a sacrificial layer and the soft-cure treatment of the TNP for fixation. This sacrificial layer approach allows for high pattern fidelity and stability, and it enables to construct stable, micrometer-thick, and contamination-free TNP patterns for developing the SS-DSSC array for miniature high-voltage applications. The array of 20 SS-DSSCs integrated in series is found to show a voltage output of around 7 V.
In this study, we developed polymer gate insulator-based organic phototransistors (p-OPTs) with improved optical switching properties by using a hybrid gate insulator configuration. The hybrid gate insulator of our p-OPT has a photoresponsive layer made of poly(4-vinylphenol) (PVP), which enhances the photoresponse, and an interfacial layer of poly(methyl methacrylate) for reliable optical switching of the device. Our hybrid gate insulator-equipped p-OPT exhibits well-defined optical switching characteristics because no specific type of charge is significantly trapped at an interfacial layer/organic semiconductor (OSC) interface. Moreover, our device is more photoresponsive than the conventional p-OPT (here, an OPT with a single-polymer poly(methyl methacrylate) (PMMA) gate insulator), because the characteristic ultraviolet (UV) absorption of the PVP polymer allows the photoresponsive layer and OSC to contribute to the generation of charge carriers when exposed to UV light.