Experimental data demonstrating differences in the structures of channels formed during nanosecond discharges through fine wires made of different materials are presented. In addition to the traditional two classes of metals and alloys (the copper and tungsten groups), a new class is proposed to which materials of the nickel type belong. Their properties combine the characteristic properties of the two traditional groups, due to which they occupy an intermediate position between the latter. This manifests itself in the unstable character of explosion, the type of which can change drastically when changing the ambient medium or other conditions. Most of the reported results were obtained at a small setup with maximum values of the current and voltage of 10 kA and 20 kV, respectively, the current rise time being about 300 ns. An attempt is made to construct a scenario of the development of a nanosecond explosion that would make it possible to qualitatively describe the formation of the discharge channel structure. The analysis is based on the recent experimental results indicating that the cores formed in the course of the discharge have a tubular structure.
1 January 1997 in Review of Scientific Instruments
The stratification dynamics at wire explosion of copper and nickel wires (25 and 50 μm) in air is studied under current dwell conditions. Experimental and theoretical data are presented for the...
The results of laser (shadow and interferometric) studies of thin silver wire cores during a nanosecond electric explosion in vacuum are presented. Experiments were performed with a small Micro-4 generator (the charge voltage is 20 kV, and the current rise rate is 100 A/ns). The analysis of the data obtained showed that, despite a considerable energy deposition (a few atomization energies) into matter at the resistive stage of the discharge, a conductor is not completely evaporated. This is related to the features of the metal–dielectric transition which occurs nonuniformly in different load regions. Processes proceeding in the case of a rapid energy deposition to a conductor are qualitatively interpreted. It was shown that in this case the bond energy as the unit of measurement of the deposited energy is more appropriate than the energy of atomisation.
12 February 2021 in Journal of Physics D: Applied Physics
This paper presents the results of studying dispersed media formation during the electrical explosion of thin metal wires in vacuum by using low-current generators (∼1–10 kA). Particular attention is paid to the analysis of the composition and structure of the corresponding explosion products as well as to the problem of their visualization using simultaneous laser interferometry and shadow imaging at two wavelengths (1.064 µ m and 0.532 µ m). Our findings indicate the important role in the visualization of the explosion products that belongs to multiple scattering by submicron droplets of dense condensed matter, which are mixed with metal vapor. The hypothesis on the existence of submicron droplets in the products of exploding metal wires correlates with the results obtained by soft x-ray radiography combined with a laser probing technique. Taking into account the multiple scattering by submicron droplets, it is possible to significantly clarify the parameters of the explosion products visualized via laser probing techniques as well as to gain a deeper insight into the physics behind the electrical wire explosion.