The loss of nitrogen and phosphate fertilizers in agricultural runoff is a global environmental problem, attracting worldwide attention. In the last decades, the constructed wetland has been increasingly used for mitigating the loss of nitrogen and phosphate from agricultural runoff, while the substrate, plants, and wetland structure design remain far from clearly understood. In this paper, the optimum substrates and plant species were identified by reviewing their treatment capacity from the related studies. Specifically, the top three suitable substrates are gravel, zeolite, and slag. In terms of the plant species, emergent plants are the most widely used in the constructed wetlands. Eleocharis dulcis, Typha orientalis, and Scirpus validus are the top three optimum emergent plant species. Submerged plants (Hydrilla verticillata, Ceratophyllum demersum, and Vallisneria natans), free-floating plants (Eichhornia crassipes and Lemna minor), and floating-leaved plants (Nymphaea tetragona and Trapa bispinosa) are also promoted. Moreover, the site selection methods for constructed wetland were put forward. Because the existing research results have not reached an agreement on the controversial issue, more studies are still needed to draw a clear conclusion of effective structure design of constructed wetlands. This review has provided some recommendations for substrate, plant species, and site selections for the constructed wetlands to reduce nutrients from agricultural runoff.

To mitigate the urban heat island (UHI) and release the low carbon potential of green walls, we analyzed the cooling and energy-saving performance of different green wall designs. Envi-met was applied as the main simulation tool, and a pedestrian street named Yuhou Street was selected as the study object. Four designs of walls were summarized and simulated, demonstrating the living wall system (LWS). Super soil had superiority in cooling and energy saving. Outdoor air temperature, indoor air temperature, outside wall surface temperature, and inside wall surface temperature were analyzed. Apart from the outdoor air temperature, the other three temperatures were all significantly affected by the design of green walls. Finally, energy savings in building cavities were determined. The indoor energy saving ratio of the LWS based on super soil reached 19.92%, followed by the LWS based on boxes at 15.37%, and green facades wall at 6.29%. The indoor cooling powers on this typical day showed that the cooling power of the LWS based on super soil was 8267.32 W, followed by the LWS based on boxes at 6381.57 W, and green facades wall at 2610.08 W. The results revealed the difference in cooling and energy-saving performance of different green walls in this typical hot summer area.

The local climate zone (LCZ) has become a new tool for urban heat island research. Taking Chenzhou as the research object, eight urban spatial form elements and land cover elements are calculated respectively through ArcGIS, Skyhelios and ENVI software. The calculation results are then rasterized and clustered in ArcGIS to obtain the LCZ map at a resolution of 200 m. Afterwards, the land surface temperature (LST) of different local climate zones in the four seasons from 2017 to 2018 is further analyzed using one-way ANOVA F-test and Student’s t-test. The results suggest that: (1) by adding localized LCZ classes and applying the semi-automatic algorithm on the Arc-GIS platform, the final overall accuracy reaches 69.54%, with a kappa value of 0.67, (2) the compact middle-rise buildings (LCZ-2′) and open low-rise buildings (LCZ-6) heavily contribute to the high LST of the downtown area, while the large low-rise buildings (LCZ-8) cause the high LST regions in the eastern part of the town, (3) obvious land surface temperature differences can be detected in four seasons among different LCZ classes, with high LST in summer and autumn. Built-up LCZ classes generally revealed higher LSTs than land cover LCZs in all seasons. The findings of this study provide better understandings of the relationship between LCZ and LST, as well as important insights for urban planners on urban heat mitigation.

By exploring the cooling potential of tree quantity, ground albedo, green roofs and their combinations in local climate zone (LCZ)-4, LCZ-5, and LCZ-6, this study focuses on the optimum cooling level that can be achieved in open residential regions in Changsha. It designs and models 39 scenarios by integrating in situ measurement and ENVI-met numerical simulation and further compares cooling effects of various combinations of the cooling factors. The results show that (1) an increased number of trees and higher albedo are more effective compared to green roofs in reducing summer potential temperatures at street level (2 m high) in three LCZs. Negative correlations are observed in the pedestrian air temperature with trees and ground albedo; (2) the effects of cooling factors vary among different LCZ classes, with the increased 60% more trees leading to lower outdoor temperatures for LCZ-4 (0.28 °C), LCZ-5 (0.39 °C), and LCZ-6 (0.54 °C), while higher albedo of asphalt surface (increased by 0.4) is more effective in LCZ-4 (reaches to 0.68 °C) 14:00, compare to LCZ-5 (0.49 °C) and LCZ-6 (0.38 °C); (3) applying combined cooling methods can provoke air temperature reduction (up to 0.96 °C), especially when higher levels of tree quantities (increased by 60%) are coupled with cool ground materials (albedo increased by 0.4). The results can contribute useful information for improving thermal environment in existing residential regions and future residential planning.