This paper investigated the diffraction of a Gaussian laser beam on a binary mask and a refractive axicon. The principles of the formation of a zero-order Bessel beam with sharp drops of the axial field intensity edges were discussed. A laser optical system based on an axicon for the formation of a Bessel beam with quasi-uniform distribution of axial field intensity was proposed. In the laser optical system, the influence of the axicon apex did not affect the output beam. The results of theoretical and experimental studies are presented. It is expected that the research results will have practical application in optical tweezers, imaging systems, as well as laser technologies using high-power radiation.

The present article is dedicated to the problem of computer-generated holograms application for measurement of optical wavefront curvature with high precision. A holographic wavefront sensor scheme based on a phase-only spatial light modulator, which is used for CGH displaying, is proposed. The presented optical scheme and processing algorithm are validated with numerical simulations and experimental modelling.

Microscale filamentation of 0.25 NA-focused, linearly and circularly polarized 1030 nm and 515 nm ultrashort laser pulses of variable pulse widths in fused silica, fluorite, and natural and synthetic diamonds demonstrates the Raman–Kerr effect in the form of critical pulse power magnitudes, proportional to squared wavelength and inversely proportional to laser pulse width of 0.3–10 ps. The first trend represents the common spectral relationship between the quantities, while the second indicates its time-integrated inertial contribution of Raman-active lattice polarization, appearing in transmission spectra via ultrafast optical-phonon Raman scattering. The optical-phonon contribution to the nonlinear polarization could come from laser field-induced spontaneous/stimulated Raman scattering and coherent optical phonons generated by electron–hole plasma with its clamped density in the nonlinear focus. Almost constant product value of the (sub)picosecond laser pulse widths and corresponding critical pulse powers for self-focusing and filamentation in the dielectrics (“critical pulse energy”) apparently implies constant magnitude of the nonlinear polarization and other “clamped” filamentation parameters at the given wavelength.

The ultrafast interaction of tightly focused femtosecond laser pulses with bulk dielectric media in direct laser writing (inscription) regimes is known to proceed via complex multi-scale light, plasma and material modification nanopatterns, which are challenging for exploration owing to their mesoscopic, transient and buried character. In this study, we report on the first experimental demonstration, analysis and modeling of hierarchical multi-period coupled longitudinal and transverse nanogratings in bulk lithium niobate inscribed in the focal region by 1030 nm, 300 fs laser pulses in the recently proposed sub-filamentary laser inscription regime. The longitudinal Bragg-like topography nanogratings, possessing the laser-intensity-dependent periods ≈ 400 nm, consist of transverse birefringent nanogratings, which are perpendicular to the laser polarization and exhibit much smaller periods ≈ 160 nm. Our analysis and modeling support the photonic origin of the longitudinal nanogratings, appearing as prompt electromagnetic and corresponding ionization standing waves in the pre-focal region due to interference of the incident and plasma-reflected laser pulse parts. The transverse nanogratings could be assigned to the nanoscale material modification by interfacial plasmons, excited and interfered in the resulting longitudinal array of the plasma sheets in the bulk dielectric material. Our experimental findings provide strong support for our previously proposed mechanism of such hierarchical laser nanopatterning in bulk dielectrics, giving important insights into its crucial parameters and opening the way for directional harnessing of this technology.

Micrometer-thick layers of Pseudomonas aeruginosa bacteria were prepared on fluorite substrates and scanned by focused mid-IR femtosecond laser radiation that was spectrally tuned to achieve the selective excitation of either the stretching C–H vibrations (3 μm), or stretching C = O, C–N vibrations (6 μm) of the amide groups in the bacteria. The enhanced biocidal efficiency of the latter selective excitation, compared to the more uniform 3-μm laser excitation, was demonstrated by performing viability assays of laser-treated bacterial layers. The bacterial inactivation by the 6-μm ultrashort laser pulses is attributed to dissociative denaturation of lipids and proteins in the cell membranes and intra-cell nucleic acids.

A simple method for reconstructing the spatial parameters of a laser beam, based on the transport-of-intensity equation, is presented. Registration of cross-section intensity distributions in several planes was carried out using a single CMOS camera. The processing of the experimental measurements with the help of specialized software helped to reconstruct all of the spatial parameters, namely, the radius and position of the waist, Rayleigh length, angular divergence, quality parameter $M^2$ The method was compared with measurements made according to the international standard ISO 11146 and showed that the difference in the spatial parameters is 10% or less, which shows good agreement.