Cages at work: structural tunability results in tailored properties, which makes these systems suitable for countless applications in sensing and separation processes, both in solution and the solid state.
The extraction of technetium, present in nitric acid medium as pertechnetate anion, is an issue in solvent extraction processes used to recover uranium and plutonium. In the present study, a complexing agent is added in the aqueous nitric acid solution to bind selectively the pertechnetate anion and prevent its extraction into the organic phase or to back extract it in the aqueous phase. Several azacryptands with the addition of hydrophilic groups were synthesized to improve the solubility of the previously studied cage molecule in nitric acid medium. Solvent extraction tests reveal that all the synthesized ligands have a similar complexation strength towards pertechnetate and are able to maintain this anion in the aqueous phase (0.5 M HNO3). These ligands are able to overcome the Hofmeister bias and selectively bind technetium in nitric acid solution. The azacryptand concentration can be increased by a factor of three in the liquid–liquid extraction conditions compared to our previous work. Coordination studies using microcalorimetry, Single Crystal X-Ray Diffraction (SC-XRD), infrared and Raman spectroscopies show the formation of an inclusion complex with hydrogen bonds stabilizing the oxo-anion within the cavity. This solubility improvement is promising for the introduction of this kind of macrocyclic azacryptands in a solvent extraction process.
Membrane-based processes are taking a more and more prominent position in the search for sustainable and energy-efficient gas separation applications. It is known that the separation performance of pure polymers may significantly be improved by the dispersion of suitable filler materials in the polymer matrix, to produce so-called mixed matrix membranes. In the present work, four different organic cages were dispersed in the poly(ether ether ketone) with cardo group, PEEK-WC. The m-xylyl imine and furanyl imine-based fillers yielded mechanically robust and selective films after silicone coating. Instead, poor dispersion of p-xylyl imine and diphenyl imine cages did not allow the formation of selective films. The H2, He, O2, N2, CH4, and CO2 pure gas permeability of the neat polymer and the MMMs were measured, and the effect of filler was compared with the maximum limits expected for infinitely permeable and impermeable fillers, according to the Maxwell model. Time lag measurements allowed the calculation of the diffusion coefficient and demonstrated that 20 wt % of furanyl imine cage strongly increased the diffusion coefficient of the bulkier gases and decreased the diffusion selectivity, whereas the m-xylyl imine cage slightly increased the diffusion coefficient and improved the size-selectivity. The performance and properties of the membranes were discussed in relation to their composition and morphology.
In this work, we combined smartphone sensing with the indicator displacement approach for the determination of trans,trans-muconic acid (i.e.tt-MA), a benzene biomarker, in urine. Dicopper(II) azacryptate was employed as the receptor. The good match of tt-MA with the receptor cavity was suggested by DFT calculations, and confirmed experimentally by UV-vis titrations in buffered aqueous solutions. The binding constant was determined through fluorimetric titrations using the indicator displacement approach. This method also confirmed the high affinity of the azacryptate for tt-MA in artificial and spiked urine samples. A portable device was then obtained by adsorption of the chemosensing ensemble on silica gel using ELISA-like plastic wells as the support. Indicator displacement was detected and quantified by exposing the microplate to a UV-lamp (366 nm) and recording the RGB values with a smartphone. A good correlation was found between the R index values and urinary tt-MA in the occupational concentration range.