A wavelength-spacing-controllable multi-wavelength polarization-maintaining erbium-doped fiber laser (MW-PM-EDFL) in a linear cavity configuration is presented based on a Lyot–Sagnac filter and a nonlinear optical loop mirror (NOLM). Using a Lyot–Sagnac filter as the wavelength selective filter makes the wavelength spacing controllable by adjusting the effective length of polarization-maintained fiber (PMF) segments. An NOLM inducing wavelength-dependent cavity loss can be used as an amplitude equalizer, which is employed to suppress the mode competition resulting from the homogeneous line broadening effect of the erbium-doped fiber in the cavity. Thus, a stable wavelength-spacing-controllable MW-PM-EDFL is realized. In this experiment, 20 stable lasing wavelengths are obtained with a pump power of 170 mW at 980 nm when the length of the PMF is 13 m. When the length of the PMF is 8 m, 10 stable lasing wavelengths are obtained at 185 mW pump power. The power fluctuations and wavelength shifts are less than 2 dB and 0.02 nm in 1 h at room temperature. The demonstrated multi-wavelength fiber laser has great potential for applications in optical communications and optical sensing systems.
The tunable fiber laser with high tuning resolution in the C-band is proposed and demonstrated based on a digital micromirror device (DMD) chip and an echelle grating. The laser employs a DMD as a programmable wavelength filter and an echelle grating with high-resolution features to design a cross-dispersion optical path to achieve high-precision tuning. Experimental results show that wavelength channels with 3 dB-linewidth less than 0.02 nm can be tuned flexibly in the C-band and the wavelength tuning resolution is as small as 0.036 nm. The output power fluctuation is better than 0.07 dB, and the wavelength shift is below 0.013 nm in 1 h at room temperature.
A wavelength-tunable Q-switched erbium-doped fiber laser based on a digital micromirror device (DMD) is experimentally demonstrated. The Q-switched pulses are generated by incorporating a saturable absorption device made of graphene oxide. Stable Q-switched pulses at 1.5 µm band are obtained at a low threshold of 20 mW, corresponding to the pulse width of 7.1 µs and the repetition rate of 43.3 kHz. The maximum output power and the maximum pulse energy of the Q-switched pulses are 260.1 µW and 3.97 nJ, respectively. By controlling the DMD, the center wavelength of the Q-switched pulses can be tuned from 1528.2 to 1559.3 nm, with a tuning range of about 31 nm. The fine tunable accuracy can reach 0.08 nm by precisely controlling the DMD. Combining the filtering characteristics of the DMD with the saturable absorption characteristics of nanomaterials, the Q-switched laser with tunable wavelength is realized, which, we believe, is reported for the first time and has broad application prospects.
In the paper, a weighted-coupling scheme of a SiO2 film-loaded Ti:LiNbO3 quasi-collinear integrated acousto-optic mode converter is reported, in which an angular offset between the acoustic and optical waveguides is introduced to implement an optimized Hamming weighted function for realization of ultralow sidelobe level. Acoustic wave guiding properties have been investigated for films such as SiO2, ZnO on LiNbO3 firstly. SiO2 film on LiNbO3 was selected as acoustic waveguide. With the mode analysis of the acoustic wave guide and the theory of coupling mode the limit of the width, weighted coupling coefficient and the characteristics of the conversion of acousto-optic modes are obtained. As the angle between acoustical and optical waveguides is 0.45°, the worst sidelobe level is -16dB and the theoretical values of bandwidths of -3dB and -10dB is 1.37nm and 2.31nm respectively, which have excelled the domestic reported level.