Planar channeling in bent crystals has been observed in LHC with multi-TeV proton beam in 2015. Two crystals, mounted on novel high-accuracy goniometers (one in the horizontal and one in the vertical plane), are integrated in the LHC collimation system, for studying the feasibility of the crystal-based collimation scheme. Using this experimental setup, tests with fully-stripped lead ion beams at both 450 Z and 6500 Z GeV were carried during dedicated LHC beam time. Planar channeling was observed for the first time with lead ions at these unprecedented energies surpassing by more than 1 order of magnitude the previous state-of-the-art for lead heavy ions and providing an important experimental basis for future applications of bent crystals in beam manipulations. The set of measurements performed to confirm this observation, as the local loss reduction in presence of channeling and the evidence of a deflected beam downstream of the crystal, are presented.
The High-Luminosity Large Hadron Collider (HL-LHC) project aims at extending the operability of the LHC by another decade and increasing by more than a factor of ten the integrated luminosity that the LHC will have collected by the end of Run 3. This will require doubling the beam intensity and reducing the transverse beam size compared to those of the LHC design. The higher beam brightness poses new challenges for machine safety, due to the large energy of 700 MJ stored in the beams, and for beam stability, mainly due to the collimator contribution to the total LHC beam coupling impedance. A rich research program was therefore started to identify suitable materials and collimator designs, not only fulfilling impedance reduction requirements but also granting adequate beam-cleaning and robustness against failures. The use of thin molybdenum coatings on a molybdenum–graphite substrate has been identified as the most promising solution to meet both collimation and impedance requirements, and it is now the baseline choice of the HL-LHC project. In this work we present the main results of the coating characterization, in particular addressing the impact of coating microstructure on the electrical resistivity with different techniques, from Direct Current (DC) to GHz frequency range.
Understanding the concept of dynamic aperture provides essential insights into nonlinear beam dynamics, beam losses, and the beam lifetime in circular particle accelerators. This comprehension is crucial for the functioning of modern hadron synchrotrons like the CERN Large Hadron Collider and the planning of future ones such as the Future Circular Collider. The dynamic aperture defines the extent of the region in phase space where the trajectories of charged particles are bounded over numerous revolutions, the actual number being defined by the physical application. Traditional methods for calculating the dynamic aperture depend on computationally demanding numerical simulations, which require tracking over multiple turns of numerous initial conditions appropriately distributed in phase space. Prior research has shown the efficiency of a multilayer perceptron network in forecasting the dynamic aperture of the CERN Large Hadron Collider ring, achieving a remarkable speed-up of up to 200-fold compared to standard numerical tracking tools. Building on recent advancements, we conducted a comparative study of various deep learning networks based on BERT, DenseNet, ResNet and VGG architectures. The results demonstrate substantial enhancements in the prediction of the dynamic aperture, marking a significant advancement in the development of more precise and efficient surrogate models of beam dynamics.
The dynamic aperture is an essential concept in circular particle accelerators, providing the extent of the phase space region where particle motion remains stable over multiple turns. The accurate prediction of the dynamic aperture is key to optimising performance in accelerators such as the CERN Large Hadron Collider and is crucial for designing future accelerators like the CERN Future Circular Hadron Collider. Traditional methods for computing the dynamic aperture are computationally demanding and involve extensive numerical simulations with numerous initial phase space conditions. In our recent work, we have devised surrogate models to predict the dynamic aperture boundary both efficiently and accurately. These models have been further refined by incorporating them into a novel active learning framework. This framework enhances performance through continual retraining and intelligent data generation based on informed sampling driven by error estimation. A critical attribute of this framework is the precise estimation of uncertainty in dynamic aperture predictions. In this study, we investigate various machine learning techniques for uncertainty estimation, including Monte Carlo dropout, bootstrap methods, and aleatory uncertainty quantification. We evaluated these approaches to determine the most effective method for reliable uncertainty estimation in dynamic aperture predictions using machine learning techniques.
Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
In recent years, upgrades across CERN’s injector complex and the Large Hadron Collider (LHC) have significantly enhanced the performance in the ion program with Pb beams, reaching new records. While heavy-ion operation will continue in Run 4 (2030–2033), the objectives for Run 5 (currently foreseen to start in 2036) would benefit from significantly higher nucleon–nucleon luminosity. Since further major gains with the present Pb–Pb configuration are not obvious, this work explores the use of lighter ion species and alternative production schemes. A numerical computational program that accounts for realistic limitations in the injectors, is used together with beam-tracking simulations in the LHC, to estimate the achievable luminosity in a typical one-month run. Results indicate that, under optimistic assumptions, the lightest studied species (oxygen), could yield up to a factor 4 increase compared with the baseline Pb–Pb case, while larger collision systems provide smaller improvements. These projections however, rely on untested concepts and require further validation through injector studies and hardware upgrades. The findings of this work underline the potential of light-ion operation to expand the discovery reach of future LHC experiments beyond Run 4.