Recursive Plots (RPs) can fully utilize the information of signals on a time scale, but their application involves the issue of manual threshold selection, and different thresholds have a significant impact on the analysis results of recursive plots, which in turn affects the accuracy of subsequent fault diagnosis models. Some scholars have proposed the no-threshold recursive plot method to address the above issues, but this method is not comprehensive enough and has limitations. On the basis of RPs, this article proposes a Threshold-Free Recurrence Distance (TFRD), which is combined with a Convolutional Neural Network (CNN) to form a TFRD-CNN rotating machinery fault diagnosis model. The accuracy of the method is tested using bearing vibration data from Western Reserve University, and the effectiveness of the model is verified using a planetary gearbox gear fault dataset. At the same time, the TFRD-CNN method is compared with a Markov Transition Field (MTF), Gramian Angular Fields (GAF), and RP and URP combined with CNN methods. The results show that the TFRD-CNN method has significant advantages.
This paper aims to investigate nonlinear vibration characteristics of rotor system considering cogging and harmonic effects. Firstly, relative permeance with eccentric was established and then corrected by correction factor caused by the cogging effect. Based on the new formula of relative permeance, the expression of unbalanced magnetic force was obtained, and the coefficient of cogging effect was defined. Motion equations of rotor system were established, and Runge–Kutta method was used to solve the equations. Results showed that errors between finite and analytical results were smaller considering cogging and harmonic effects. When the harmonics were taken into consideration, the vibration of rotor increases sharply. When the cogging and harmonics were taken into consideration simultaneously, the vibration of rotor decreased instead, which means that stator slots have the effect of reducing vibration in rotor system. Rotor vibration was axis symmetry with static eccentricity rather than central symmetry with no eccentricity, and double, four times, and six times supply frequency always existed in the components of main frequency with eccentric.