Nowadays, installation of geosynthetics is an effective and economical way to cater soil stability problems. It also helps in designing reliable, constructible, eco-friendly, cost-effective geotechnical structures. Numerous infrastructures resting on these stabilized soil structures is prone to failure due to collapse which result in financial loss, loss of life and disturbance in the services which may take few years to rebuilt. The aim of this paper is to highlight the importance of geogrid and wire mesh as a reinforcement method in reinforced fill structure. To assess the performance of this soil reinforcement, finite element method analysis was adopted. The geometry model of this reinforced fill structure has dimensions as 10 m height, 20 m wide. The type of geogrid used consist of high tenacity polyester fibers coated with a polyethylene sheath. This research paper explores the use of reinforced fill structures incorporating geogrids and wire mesh as an economical, eco-friendly, and adaptable alternative to conventional methods. These structures offer advantages in terms of minimal labor, low manufacturing costs and easy to install that can be customized to fit the specific requirement of any project. The study concludes that reinforced fill structures using geogrids and wire mesh represent a promising alternative solution for construction projects. <!----> <!----> <!----> <!---->
For many years, granular fill has been the preferred fill material in reinforced fill structures (RFSs) due to its high strength and drainage properties. However, the global scarcity of granular fill has necessitated the exploration of alternative fill materials. This study aims to evaluate the performance of three different alternative fill materials: (i) weak onsite fill (fill 1), (ii) lime-stabilized onsite fill (fill 2), and (iii) recycled construction and demolition (C & D) waste (fill 3). A finite element analysis (FEA) was conducted to assess the stability and horizontal displacement of an RFS and the long-term creep deformation of geogrid using viscoelastic (time-dependent) model in Plaxis. This RFS comprised a combination of wire mesh and geogrids, serving as primary and secondary reinforcement materials, respectively. The results indicate that fill 1, with low shear strength and stiffness, induces excessive lateral displacement and was unstable, making it unsuitable for RFS applications. In contrast, Fill 2 and Fill 3 achieve Eurocode-based safety factors of 1.12 and 1.19, respectively, while significantly reducing horizontal displacement. The long-term creep deformation analysis of geogrid in the case of fill 1 exceeds the prescribed serviceability strain limit threshold, while in the cases of fill 2 and fill 3, it conforms to the serviceability strain limit, which indicates effective mobilization of tensile resistance without excessive elongation. Finally, an analysis was conducted to optimize the geogrid length and to see its impact on cost and performance. The results revealed up to a 29% cost reduction while ensuring performance criteria. These findings validate lime-stabilized onsite fill and recycled C&D waste as viable, cost-effective alternatives to conventional granular backfill, ensuring not only stability and serviceability but also the long-term performance of geogrids in RFSs.
This study investigates the feasibility of landfill expansion using the limit equilibrium and finite element methods. A 15.5 m high reinforced fill structure (RFS) was analyzed to assess how fill type, consolidation rate, geometric configuration, waste strength, compaction and the inclusion of banquettes affect horizontal displacement, differential settlement, reinforcement strain and facing behavior. The baseline configuration demonstrated acceptable settlement, reinforcement strain, and gabion performance but exceeded allowable horizontal displacement limits. The scenarios including increasing consolidation rate and substitution with sand fill further aggravated displacements, whereas banquettes significantly reduced lateral movement and settlement, demonstrating their effectiveness in stabilizing slopes. Enhancing the industrial waste properties decreased displacements substantially improving overall stability. Geometric modifications, such as widening the reinforced zone, enhanced displacement control, while higher compaction achieved the best global performance, albeit with increased gabion compressibility. Extending geogrid length provided only marginal improvements beyond a certain threshold. Overall, banquettes, enhanced waste properties, and improved compaction were identified as the most effective strategies for stable efficient landfill expansion, emphasizing the importance of displacement control and reinforcement–facing interaction.
The understanding of the fill material-geogrids interface is critical in the design of the reinforced fill structure. Pullout tests are commonly used to characterize the interaction between fill material and geogrids. In recent years, recycled aggregate shows some promising results to be used as an alternative fill material. Nevertheless, the interaction between selected recycled aggregate and geogrids requires further investigation. This paper presents experimental results focusing on the interaction between one type of recycled aggregate and two different geogrids through a series of large-scale pullout tests. The pullout resistance of the geogrid is correlated with the confining stress. When the confining stress increases from 10 to 30 kPa, the peak value of the pullout resistance also increases due to the improved interlocking of recycled aggregate with the geogrid. Tighter interlocking provides greater resistance to the applied pullout force, leading to higher pullout resistance. Increased vertical confining stress enhances contact between the geogrid and recycled aggregate, creating a stronger bond resulting in dilatancy of the aggregates, which in turn results in higher frictional resistance against the pullout force. The results show that the tested recycled aggregate can be used as a fill material in a reinforced fill structure.
Reinforced fill structures (RFS) play a vital role in geotechnical engineering applications which includes retaining walls, embankments, retaining landfill structures, & slope stabilization. The use of geosynthetics enhances the stability of soil, helps to distribute the loads evenly and reduces settlement. They also provide a better alternative in terms of cost, aesthetics, simplified construction and adaptability to different site conditions. The choice of a backfill material is a critical parameter in the design and construction of a RFS. Usually, granular material is considered to be a conventional backfill material because of various benefits i.e. having high strength & good drainage capability. But due to shortage of granular soil, it is necessary to study other alternatives. The use of marginal fill as an alternative has been pointed out as a sustainable and effective means of attenuating the environmental impacts and reducing natural resource depletion. This paper presents a numerical study within the finite element method framework. The findings demonstrate that marginal fill can provide a reliable, environmentally sustainable option for RFS.