A measurement of the cosmic ray positron fraction e+/(e++e−)e+/(e++e−) in the energy range of 1–30 GeV is presented. The measurement is based on data taken by the AMS-01 experiment during its 10 day Space Shuttle flight in June 1998. A proton background suppression on the order of 106 is reached by identifying converted bremsstrahlung photons emitted from positrons

The aim of this work is to investigate the effect of the applied voltage on the morphological and mechanical properties of electrospun polycaprolactone (PCL) scaffolds for potential use in tissue engineering. The morphology of the scaffolds was characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and the BET techniques for measuring the surface area and pore volume. Stress-strain curves from tensile tests were obtained for estimating the mechanical properties. Additional studies for detecting changes in the chemical structure of the electrospun PCL scaffolds by Fourier transform infrared were performed, while contact angle and X-ray diffraction analysis were realized for determining the wettability and crystallinity, respectively. The SEM, AFM and BET results demonstrate that the electrospun PCL fibers exhibit morphological changes with the applied voltage. By increasing the applied voltage (10 to 25 kV) a significate influence was observed on the fiber diameter, surface roughness, and pore volume. In addition, tensile strength, elongation, and elastic modulus increase with the applied voltage, the crystalline structure of the fibers remains constant, and the surface area and wetting of the scaffolds diminish. The morphological and mechanical properties show a clear correlation with the applied voltage and can be of great relevance for tissue engineering.

The dynamics of multiwall carbon nanotube (MWCNT) alignment inside viscous media using electric fields is investigated. Electrical current measurements were performed in situ during the application of an electric field to liquid solutions of deionized water or dissolved polymer containing MWCNTs. The variation of electrical current over time was associated to the dynamics of the MWCNT network formation. The influence of the electric field magnitude and frequency on the MWCNT network formation was studied. MWCNT migration towards the negative electrode was observed when a direct current electric field was applied, whereas formation of an aligned MWCNT network was achieved for an alternating current electric field. The increase of the electric field frequency promotes a faster formation of an aligned MWCNT network and thinner MWCNT bundles. A higher viscosity of the liquid medium yields slower MWCNT alignment evidenced by a slower change of electrical current through the viscous system. An analytical model based on the dielectrophoresis-induced torque, which considers the viscosity of the medium, is also proposed to explain the dynamics of MWCNT alignment. Furthermore, aligned MWCNT/polysulfone solid composites were fabricated and electrically characterized. The solid composites presented anisotropic electrical conductivity, which was more evident for low MWCNT concentrations (0.1-0.2 wt%).