The use of solvents is overall recognized as an efficient method to improve the water permeability of polyamide thin film composite membranes (PA-TFC). The objective of this work was to test the performance of the membranes after exposing them to n-propanol (n-PrOH) to improve the permeability of the membranes while maintaining the rejection factor for small uncharged organic molecules, namely N-nitrosamines (NTRs). After the membranes were exposed to n-PrOH, the water permeability of the UTC73AC membrane increased by 98%, with minimal change in rejection. N-nitrosodiethylamine (NDEA) rejection decreased (3.4%), while N-nitrosodi-n-propylamine (NDPA) and N-nitrosodi-n-butylamine (NDBA) rejection increased by 0.9% and 2.8%, respectively. In contrast, for the BW30LE membrane, water permeability decreased (by 38.7%), while rejection factors increased by 14.5% for NDEA, 6.2% for NDPA, and 15.0% for NDBA. In addition, the morphology of the membrane surface before and after exposure to n-PrOH was analyzed. This result and the pore size distribution (PSD) curves obtained indicate that the rearrangement of polymer chains affects the network or aggregate pores in the PA layer, implying that a change in pore size or a change in pore size distribution could improve the permeability of water molecules, while the rejection factor for NTRs is not significantly affected.