Abdisa Sisay Mekonnin

Abdisa Sisay Mekonnin

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 March 2025 in Catalysts
Verified
Journal Article
Open access
PDF file
AMAbdisa Sisay Mekonnin
Abdisa Sisay Mekonnin
KWKrzysztof Wacławiak
Krzysztof Wacławiak
MHMuhammad Humayun
Muhammad Humayun
Shaowei ZhangShaowei Zhang
Shaowei Zhang
Habib ULLAHHabib ULLAH
Habib ULLAH
This paper aims to present an overview of the current state of hydrogen storage methods, and materials, assess the potential benefits and challenges of various storage techniques, and outline future research directions towards achieving effective, economical, safe, and scalable storage solutions. Hydrogen is recognized as a clean, secure, and cost-effective green energy carrier with zero emissions at the point of use, offering significant contributions to reaching carbon neutrality goals by 2050. Hydrogen, as an energy vector, bridges the gap between fossil fuels, which produce greenhouse gas emissions, global climate change and negatively impact health, and renewable energy sources, which are often intermittent and lack sustainability. However, widespread acceptance of hydrogen as a fuel source is hindered by storage challenges. Crucially, the development of compact, lightweight, safe, and cost-effective storage solutions is vital for realizing a hydrogen economy. Various storage methods, including compressed gas, liquefied hydrogen, cryo-compressed storage, underground storage, and solid-state storage (material-based), each present unique advantages and challenges. Literature suggests that compressed hydrogen storage holds promise for mobile applications. However, further optimization is desired to resolve concerns such as low volumetric density, safety worries, and cost. Cryo-compressed hydrogen storage also is seen as optimal for storing hydrogen onboard and offers notable benefits for storage due to its combination of benefits from compressed gas and liquefied hydrogen storage, by tackling issues related to slow refueling, boil-off, and high energy consumption. Material-based storage methods offer advantages in terms of energy densities, safety, and weight reduction, but challenges remain in achieving optimal stability and capacities. Both physical and material-based storage approaches are being researched in parallel to meet diverse hydrogen application needs. Currently, no single storage method is universally efficient, robust, and economical for every sector especially for transportation to use hydrogen as a fuel, with each method having its own advantages and limitations. Moreover, future research should focus on developing novel materials and engineering approaches in order to overcome existing limitations, provide higher energy density than compressed hydrogen and cryo-compressed hydrogen storage at 70 MPa, enhance cost-effectiveness, and accelerate the deployment of hydrogen as a clean energy vector.

1 January 2025 in Scientific Papers of Silesian University of Technology Organization and Management Series
Verified
Journal Article
Closed access
AMAbdisa Sisay Mekonnin
Abdisa Sisay Mekonnin
KWKrzysztof Wacławiak
Krzysztof Wacławiak
Purpose: The purpose of this work is to analyses the behavior and mechanical properties of metals, alloys, polymers, concrete, and composites of various materials at low and cryogenic temperatures below 123 K (-150.15°C). This review paper highlights the influence of cryogenic conditions upon material selection and design for applications where critical service conditions require exposure to extreme cold, including energy storage, aerospace, offshore structures, superconducting technologies, shipbuilding, and LNG carriers. Design/methodology/approach: This review attempts to synthesize results from experimental studies, computational modeling, and theoretical analyses that have examined changes in material mechanical properties at cryogenic conditions. This review is focused on the fracture toughness, tensile strength, brittleness, and associated properties of the various classes of materials. In so doing, the approach is aimed at understanding how those properties evolve at low temperatures and their implications on materials selection and design for harsh environment applications. Findings: Results show that even though cryogenic temperatures can be applied to enhance the tensile strength, modulus, ultimate strength, and fatigue resistance of materials, they simultaneously cause a significant reduction in ductility, therefore making the material more brittle with enhanced susceptibility to micro-cracking. The paper underlines the fact that material development should proceed to develop those possessing increased strength, resistance to wear and corrosion with less compromise of ductility. Limitations/implications of the research: The complexity in testing materials at cryogenic conditions and the difficulty in directly correlating the experimental results with real applications are the limitations of the research. Further research is needed before such challenges are met and before materials with optimum performance at low temperatures, without sacrificing key properties, are developed. Originality/value: This review gives important insight into the mechanical behavior of materials at cryogenic temperatures and points out the need for advanced material development with specific emphasis on additive manufacturing for tailoring material properties in view of superior performance and reliability in extreme cryogenic environments. The results will be an important guideline for future research and material selection of various industries, specifically aerospace and energy storage.

21 September 2026 in Results in Engineering
Verified
Journal Article
Open access
AMAbdisa Sisay Mekonnin
Abdisa Sisay Mekonnin
KWKrzysztof Wacławiak
Krzysztof Wacławiak
AMAntonio Atienza Márquez
Antonio Atienza Márquez

13 August 2024
Verified
Book Chapter
Closed access
PDF file
AMAbdisa Sisay Mekonnin
Abdisa Sisay Mekonnin
HBHabtamu Beri
Habtamu Beri
MGMoera Gutu
Moera Gutu
DSDevendra Kumar Sinha
Devendra Kumar Sinha
BGBirhane Assefa Gemeda
Birhane Assefa Gemeda
RSRam Sewak Singh
Ram Sewak Singh
Nowadays, products of high-quality machined components has highlighted the effect of several process factors, specifically in the fine finish quality of machined parts. The contribution of this research study is the investigation of metal cutting of hard materials and determining optimum metal cutting factors to obtain a desired quality-based metallic surface in dry hard-turning of hardened A-I-S-I 1043. The turning cutting tool is a combined Al2 O3 - TiC ceramic insert. Three experimental runs were repeated, each test was performed with new metal cutting tool insert to confirm accurate surface roughness test data. The G. Taguchi L9 orthogonal design arrays were nominated on behalf of experimental program and characteristic S/N ratio was utilized. Moreover, data variance analysis (ANOVA) was implemented to investigate domination along with metal cutting/machining factors on surface texture/roughness data. The variance analysis revealed that metal cutting/machining depth, tool feed, and cutting speed were 0.75%, 22.33%, and 74.22%, respectively, and the best cutting factors achieved were 1.24 µm, and it was established that hard turning could efficiently and effectively replace cylindrical grinding. Hard metal turning machining occurring into AISI/1043 hardened steel materials metals obtained a robust surface smooth- ness and finish quality at high machining speeds of 120 m/min, intermediate tool feed at 0.1 mm/rev, and smaller depths to metals cut at 0.15 mm. <!----> <!----> <!----> <!---->

1 August 2020
Verified
Journal Article
Closed access
AMAbdisa Sisay Mekonnin
Abdisa Sisay Mekonnin
MJMoera Gutu Jiru
Moera Gutu Jiru
ASAbdisa Sisay
Abdisa Sisay

30 December 2025 in Archives of Foundry Engineering
Verified
Journal Article
Closed access
KWKrzysztof Wacławiak
Krzysztof Wacławiak
AMAbdisa Sisay Mekonnin
Abdisa Sisay Mekonnin
This study investigates the mechanical properties of EN AC-AlSi12CuNiMg aluminium alloy (AlSi12) and its SiC-reinforced composite (AlSi12/10SiCp) under low-temperature conditions. Tensile tests were conducted at temperatures ranging from room temperature to -80°C using a testing machine equipped with a cooling chamber. The results reveal a significant temperature-dependent behaviour in both materials. As the temperature decreased, the ultimate tensile strength (UTS) of the AlSi12 alloy increased linearly from 140 MPa at room temperature to 194 MPa at -80°C, representing a 38.6% improvement. Similarly, the AlSi12/10SiCp composite exhibited a 15.3% increase in UTS, from around 170 MPa at room temperature to 196 MPa at -80°C. Both materials exhibited brittle fracture behaviour, with elongation values below 5% and no evidence of necking. Microstructural analysis using scanning electron microscopy (SEM) identified coarse grains, micro-pores, and intermetallic compounds as key factors degrading mechanical properties. Fractographic analysis revealed cleavage-like fracture surfaces with sharp morphologies and micro-cracks, consistent with brittle fracture modes. These findings highlight the limited ductility and enhanced strength of EN AC-AlSi12CuNiMg aluminium alloy and its composite at low temperatures.