Abdulkader El-Mir

Dr. Abdulkader El-Mir

Civil and Environmental Engineering, University of Balamand, Tripoli, Liban-Nord, Lebanon

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 January 2023 in Construction and Building Materials
Verified
Journal Article
Closed access
AEAbdulkader El-Mir
Abdulkader El-Mir
JHJoud Hwalla
Joud Hwalla
HEHilal El-Hassan
Hilal El-Hassan
JAJoseph Assaad
Joseph Assaad
AEAmr El-Dieb
Amr El-Dieb
ESEhab Shehab
Ehab Shehab

18 November 2022 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
PCPonalagappan Chokkalingam
Ponalagappan Chokkalingam
HEHilal El-Hassan
Hilal El-Hassan
AEAmr El-Dieb
Amr El-Dieb
AEAbdulkader El-Mir
Abdulkader El-Mir

11 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Mohamad EZZEDINE EL DANDACHYMohamad EZZEDINE EL DANDACHY
Mohamad EZZEDINE EL DANDACHY
LHLovey Hassoun
Lovey Hassoun
AEAbdulkader El-Mir
Abdulkader El-Mir
Jamal M. KhatibJamal M. Khatib
Jamal M. Khatib
This study aims to investigate the impact of moderate and elevated temperatures on compressive strength, mass loss, ultrasonic pulse velocity (UPV), and gas permeability of mortars made using metakaolin (MK) or Ordinary Portland cement (OPC). The geopolymer mortar comprises MK, activated by a solution of sodium hydroxide (SH) and sodium silicate (SS) with a weight ratio of SS/SH equal to 2.5. For most of the tests, the MK and OPC mortar specimens were cured for 7 and 28 days before exposure to elevated temperatures, ranging from 100 °C to 900 °C in increments of 100 °C. In the permeability tests, conducted at temperatures ranging from 100 °C to 300 °C in 50 °C increments, the results revealed significant findings. When exposed to 200 °C, MK geopolymer mortar demonstrated an increase in compressive strength by 83% and 37% for specimens initially cured for 7 and 28 days, respectively. A strong polynomial correlation between UPV and compressive strength in MK mortar was observed. Prior to heat exposure, the permeability of MK mortar was found to be four times lower than that of OPC mortar, and this difference persisted even after exposure to 250 °C. However, at 300 °C, the intrinsic permeability of MK mortar was measured at 0.96 mD, while OPC mortar exhibited 0.44 mD.

18 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
FAFaiz Habib Anwar
Faiz Habib Anwar
HEHilal El-Hassan
Hilal El-Hassan
Mohamed HamoudaMohamed Hamouda
Mohamed Hamouda
AEAbdulkader El-Mir
Abdulkader El-Mir
SMSafa Mohammed
Safa Mohammed
Kim Hung MoKim Hung Mo
Kim Hung Mo
This paper evaluates the effect of mix design parameters on the mechanical, hydraulic, and durability properties of pervious geopolymer concrete (PGC) made with a 3:1 blend of granulated blast furnace slag (GBFS) and fly ash (FA). A total of nine PGC mixtures were designed using the Taguchi method, considering four factors, each at three levels, namely, the binder content, dune sand addition, alkaline-activator solution-to-binder ratio (AAS/B), and sodium hydroxide (SH) molarity. The quality criteria were the compressive strength, permeability, and abrasion resistance. The Taguchi and TOPSIS methods were adopted to determine the signal-to-noise (S/N) ratios and to optimize the mixture proportions for superior performance. The optimum mix for the scenarios with a compressive strength and abrasion resistance at the highest weights was composed of a binder content of 500 kg/m3, dune sand addition of 20%, AAS/B of 0.60, and SH molarity of 12 M. Meanwhile, the optimum mix for the permeability-dominant scenario included a 400 kg/m3 of binder content, 0% of dune sand addition, 0.60 of AAS/B, and 12 M of SH molarity. For a balanced performance scenario (i.e., equal weights for the responses), the optimum mix was similar to the permeability scenario with the exception of a 10% dune sand addition. An ANOVA showed that the binder content and dune sand addition had the highest contribution toward all the quality criteria. Multivariable regression models were established to predict the performance of the PGC using the mix design factors. Experimental research findings serve as a guide for optimizing the production of PGC with a superior performance while conducting minimal experiments.

27 June 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
AEAbdulkader El-Mir
Abdulkader El-Mir
HEHilal El-Hassan
Hilal El-Hassan
AEAmr El-Dieb
Amr El-Dieb
AAAbdelrahman Alsallamin
Abdelrahman Alsallamin
This study assesses the effect of mix design parameters on the fresh and hardened properties, cost, and carbon footprint of geopolymer mortar made with desert dune fines (DDF) and blast furnace slag (BFS). Taguchi method was employed in designing the experiments. Four factors were considered, each having three levels, leading to a total of nine geopolymer mortar mixes. The factors comprised the DDF replacement percentage, alkali-activator solution to binder ratio (AAS/B), sodium silicate-to-sodium hydroxide ratio (SS/SH), and sodium hydroxide (SH) molarity. Ten performance criteria were evaluated, including the flowability, final setting time, hardened density, 1, 7, and 28-day compressive strengths, water absorption, sorptivity, cost, and carbon footprint. ANOVA was carried out to estimate the contribution of each factor towards the response criteria. Further, TOPSIS analysis was utilized to optimize the mixture proportions of DDF-BFS blended geopolymer mortar. Experimental results showed that up to 25% DDF replacement enhanced the density, strength, and durability of the geopolymers with minor impact on the flowability and setting time. Higher replacement percentages had a detrimental impact on the performance but could still be utilized in specific mortar construction applications. The other factors had more limited contributions to the performance, evidenced by the ANOVA. TOPSIS method revealed the optimum mix to be made with DDF replacement of 25%, AAS/B of 0.5, SS/SH of 1.5, and SH molarity of 10 M. Different multivariable regression models were also developed to predict the fresh and hardened properties of the DDF-BFS geopolymer mortars using the mix design parameters.

12 March 2022 in Arabian Journal for Science and Engineering
Verified
Journal Article
Closed access
PDF file
AEAbdulkader El-Mir
Abdulkader El-Mir
SNSalem G. Nehme
Salem G. Nehme
JAJoseph Assaad
Joseph Assaad