Ahmed Elsawwaf

Mr. Ahmed Elsawwaf

Department of Civil and Resource Engineering, Dalhousie University, Halifax, Nova Scotia, Canada
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2022 in Environmental Science and Pollution Research
Verified
Journal Article
Open access
PDF file
Ahmed ElsawwafAhmed Elsawwaf
Ahmed Elsawwaf
ANAshraf Nazir
Ashraf Nazir
WAWaseim Azzam
Waseim Azzam
One of the major disadvantages of micropiles is their low lateral stiffness and flexural rigidity due to the small diameter. This limitation can be handled in current practice, by installing the micropile with inclined condition or providing a steel casing. Additional steel casings will increase the lateral load capacity of micropiles but increase the project cost as well. Thus, inclination of micropile which is relatively simple and cheap is recommended. In this paper, a comprehensive numerical analysis is conducted on the behavior of micropiled rafts installed with inclined condition under combined vertical and lateral loading. A FEM calibrated against full-scale axial and lateral field tests is used to conduct the analysis. The soil profile is soft clay soil underlain by a layer of dense sand. The study investigates the impact of several parameters which are as follows: magnitude of vertical loading, reinforcement type, inclination angle of micropiles, and number of inclined micropiles. The study reveals that increasing vertical loads causes continuous decrease in the lateral load capacity of micropiled rafts. When all micropiles installed are inclined, the positively inclined micropiles carry 79–86% of the total lateral load carried by micropiles, whereas the negatively inclined ones carry 14–21%. Inclined micropiles offer greater lateral load sharing ratio (αh) than that of vertical ones, largest at θ = 45°. The effect of micropile reinforcement on improving the lateral performance is low compared to the effect of micropile inclination angle.

30 August 2023 in Transportation Infrastructure Geotechnology
Verified
Journal Article
Closed access
PDF file
MBMona Bayoumy
Mona Bayoumy
MSMostafa El Sawwaf
Mostafa El Sawwaf
ANAhmed Nasr
Ahmed Nasr
Ahmed ElsawwafAhmed Elsawwaf
Ahmed Elsawwaf

3 February 2023 in Buildings
Verified
Journal Article
Open access
PDF file
Ahmed ElsawwafAhmed Elsawwaf
Ahmed Elsawwaf
MSMostafa El Sawwaf
Mostafa El Sawwaf
AFAhmed Farouk
Ahmed Farouk
FAFarag Aamer
Farag Aamer
ElNaggar El NaggarElNaggar El Naggar
ElNaggar El Naggar
This paper presents a real case study of a micropiling process that was developed to stop the continuous tilting of a 9-story residential building in Dakahlia, Egypt. Shortly after the construction of the building, the surface raft foundation exhibited severe settlement problems. In order to carry out a geotechnical investigation, boreholes were drilled around the constructed building. It was discovered that in addition to a thick, soft clay layer in the soil profile, there was also a crucial eccentricity between the centroid of the total building loads and the centroid of the raft. The issue needed to be addressed immediately, and a micropiling system was proposed to satisfy the geotechnical and structural conditions associated with the case history. In addition to describing the field measurements, detailed methodology, and micropile installation process, this paper also presents three different design approaches for determining the number and location of the micropiles. Although the underpinning process itself initially induced some settlement, micropiling the raft proved to be an efficient solution to stop the continuous tilting of the building. A micropile load test confirmed the advantageous effect of the grouting technique used for Type B micropiles, where the grout is injected under high pressure.

17 February 2023 in Arabian Journal of Geosciences
Verified
Journal Article
Open access
PDF file
Ahmed ElsawwafAhmed Elsawwaf
Ahmed Elsawwaf
ANAshraf Nazir
Ashraf Nazir
WAWaseim Azzam
Waseim Azzam
AFAhmed Farouk
Ahmed Farouk
The micropiled raft offers a foundation system that combines the advantages of the conventional piled raft and the efficient installation of micropiles. In this paper, a comprehensive numerical analysis was conducted on the behavior of micropiled rafts under combined vertical and lateral loading using finite element modeling. A numerical model calibrated against full-scale axial and lateral field tests is used to conduct the analysis. The soil profile was soft clay soil underlain by a layer of dense sand. Numerous cases were analyzed to assess the lateral performance of micropiled rafts while considering several factors that may affect the performance, such as micropiles spacing, raft thickness, the magnitude of vertical loading, micropiles length, and their arrangement. The difference between the lateral performance of a primary micropiled raft and that of an existing raft enhanced by underpinning micropiles was also investigated. The lateral load capacity of the micropiled raft, the bending moment, and the shear force along the micropiles depth were estimated. Moreover, the load-sharing ratio between the micropiles and the raft was assessed. Based on the parametric study results, significant guidelines for choosing suitable micropiled raft configurations for initial design purposes were provided.

24 June 2025 in Ocean Engineering
Verified
Journal Article
Open access
Ahmed ElsawwafAhmed Elsawwaf
Ahmed Elsawwaf
ElNaggar El NaggarElNaggar El Naggar
ElNaggar El Naggar
FCFarrukh A. Choksi
Farrukh A. Choksi
HAHabib Amin
Habib Amin

10 April 2023 in Arabian Journal for Science and Engineering
Verified
Journal Article
Open access
PDF file
Ahmed ElsawwafAhmed Elsawwaf
Ahmed Elsawwaf
MSMostafa El Sawwaf
Mostafa El Sawwaf
ANAshraf Nazir
Ashraf Nazir
Waseim AzzamWaseim Azzam
Waseim Azzam
AFAhmed Farouk
Ahmed Farouk
Emad EtmanEmad Etman
Emad Etman
This paper used finite element modeling to evaluate the consolidation effect on the performance of existing rafts underpinned with micropiles under combined vertical and lateral loads. For this purpose, a real-life case study was discussed, in which micropile underpinning was used to stop the continuous tilt of a 13-floor residential building supported by a surface raft. It was found that the building tilted towards the northeast direction because of the consolidation of a deep soft clay layer under the northeast building corner. After discussing the as-built micropiling system, a 3D numerical model, developed using the PLAXIS software, was used to conduct the numerical research. The time-dependent behavior of the raft with and without the consideration of micropiles was assessed. Moreover, the variation of load-sharing ratios with time was investigated. The numerical results emphasize that the underpinning process was effective and reduced the final raft rotation and maximum settlement by 79.9% and 73.9%, respectively, compared to the case of the absence of micropiles. The consolidation process under a steady level of vertical loads enhanced the performance of the micropiled and unmicropiled rafts against upcoming lateral loads. The vertical load-sharing ratio increased during a life span of 20 years by 10.4% due to the consolidation process, but the increase was at a decreasing rate. Comparing all the four directions in which the lateral load was applied, the micropiles carried (57.4–76.6%) of the lateral load.